{"product_id":"4ms-sampler","title":"4ms Sampler","description":"\u003cp\u003eRecord, play and loop stereo .wav files with a microSD card. Includes the same pack of hundreds of samples included with our \u003ca href=\"https:\/\/4mscompany.com\/sts.php\"\u003eStereo Triggered Sampler\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eUnits made before 2025 were 16hp in size, and new ones are now 12hp! All other features are the same.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverview:\u003c\/strong\u003e\u003cbr\u003eThe Sampler plays stereo or mono .wav files from an SD Card with controls for Pitch (including a 1V\/oct jack), Start Position, and Length.\u003cbr\u003eA knob and CV jack selects the Sample to play, and the Start Position knob and CV jack control where in the sample playback will begin. The Length knob and CV jack determine how much of the sample is played back: from tiny grains, to percussive hits, to longer loops... or just the entire file.\u003cbr\u003ePressing Play or firing a trigger into the Play Trig jack will play the sample. Holding the Play button down for a second will toggle looping.\u003cbr\u003eThere's also a Reverse button and jack for backwards playback, and an End Out jack for synchronizing loops, or cascading sample playback with other events.\u003cbr\u003eIf a sample file contains cues (labels or markers), the Start Pos and Length knobs will snap to these cue points. *\u003cbr\u003eTo record samples, hold Play and Reverse for two seconds. Press Play again or fire a trigger into the Play\/Rec Trig jack to start and stop recording. Each recording will create a new stereo 48kHz 24bit .wav file in the current bank's folder. Recordings can be as long as your card has the capacity for: a 256GB card is 18 days of continuous recording (432.9 hours). Audio data is split into maximum 4GB wav files on the microSD card.\u003cbr\u003eSamples are arranged into banks by placing .wav files into folders (each folder is a bank). A maximum of 10 samples can be loaded in a bank. There is a maximum of 60 banks (600 samples maximum total).\u003cbr\u003eSample files are limited to 4GB each, which is over 6 hours at 44k\/16b\/stereo.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHundreds of samples included on microSD card\u003c\/li\u003e\n\u003cli\u003eExtremely quiet, low noise and low jitter design\u003c\/li\u003e\n\u003cli\u003eStereo or Mono output\u003c\/li\u003e\n\u003cli\u003ePlay button\/trigger jack: Tapping the button or receiving a trigger starts\/re-starts the sample\u003c\/li\u003e\n\u003cli\u003eSample CV\/knob: select which sample within the channel's bank\u003c\/li\u003e\n\u003cli\u003ePitch CV and Pitch knob: playback pitch (-10 to +4 octave range)\u003c\/li\u003e\n\u003cli\u003eStart Pos CV\/knob: position in the sample to begin playback (loop start point)\u003c\/li\u003e\n\u003cli\u003eLength CV\/knob: playback time (loop end point)\u003c\/li\u003e\n\u003cli\u003eLength knob at max: entire file is played\u003c\/li\u003e\n\u003cli\u003eLength knob 50%-99%: 200ms - 5s of the sample is played (beginning at the Start Position)\u003c\/li\u003e\n\u003cli\u003eLength knob \u0026lt;50%: Percussive decay envelope is applied to the playback (attack-only envelope if playing Reverse)\u003c\/li\u003e\n\u003cli\u003eLength \u0026lt;1%: Tiny grains are played (can be used to sweep through sample file data manually)\u003c\/li\u003e\n\u003cli\u003eReverse button\/jack: toggles forward\/backwards\u003c\/li\u003e\n\u003cli\u003eBank button: selects channel's bank\u003c\/li\u003e\n\u003cli\u003eReverse+Start Pos button\/knob combo allows for setting volume of playback\u003c\/li\u003e\n\u003cli\u003eMaximum file size for playback: 4GB per file (6.7 hours per file at 44.1kHz\/16b\/stereo)\u003c\/li\u003e\n\u003cli\u003emicroSD Card is hot-swappable when Busy light is off: no power-down required to change cards.\u003c\/li\u003e\n\u003cli\u003eSamples that are pre-loaded into memory can continue playing while card is swapped.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFile Organization:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eUsing a computer, the intuitive automatic bank loading features make dragging and dropping your entire sample library a snap. No files need to be renamed. Just create folders and put up to 10 samples in each. If you want a folder to be associated with a particular color of the Bank button, name the folder a color name (such as \"Blue - Loops\").\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips with a high-speed 16GB microSD card, loaded with hundreds of samples created for 4ms, from musicians such as Richard Devine, Wobbly, Moor Mother, Robert Aiki Aubrey Lowe, Joseph Pailo, Russell E.L. Butler, Hugo Paris \u0026amp; Marc Kate, Paul Barker, Baseck, Animal Collective, Cristian Vogel, Jay E, Marcus Fischer, Chris Carter, Daedelus, Nero Bellum, Anna Sitko, Thomas Fang, Bogdan Raczynski, and more (\u003ca href=\"https:\/\/4mscompany.com\/media\/STS\/manual\/__Sample%20List__.html\"\u003eSample List\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eIntuitive bank\/color organization system \u0026amp;em no need to rename your wav files\u003c\/li\u003e\n\u003cli\u003eRecord new samples directly to a bank with the Record Input jacks...\u003c\/li\u003e\n\u003cli\u003e... or drag your folders of sound files onto the microSD card, and each folder will become a bank.\u003c\/li\u003e\n\u003cli\u003eFolders starting with a color name will be loaded into that color bank\u003c\/li\u003e\n\u003cli\u003eExample \"Blue - Frooty Loops\" will load into the Blue bank\u003c\/li\u003e\n\u003cli\u003eSub-folders are ignored, only folders in the root directory are scanned for wav files\u003c\/li\u003e\n\u003cli\u003eWorks best with UHS Speed Class 3 cards with |3| symbol printed on the card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Note on Cues:\u003c\/strong\u003e\u003cbr\u003eReaper is the recommended software for inserting cues in WAV files. The Sampler supports up to 4 cue points per sample. The settings.txt file (found in the _STS.system folder) needs to have a feature called [USE CUES] enabled. Save a new settings.txt file by holding down all three buttons on the Sampler, then power off the module, take the microSD card out, and edit the settings.txt file so that the line under [USE CUES] (at the end) says Yes instead of No. Then reinsert the microSD card into the Sampler and power it up, and both Start Pos and Length should snap to the cues.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eElectrical and Mechanical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModule Size:\r\n\u003cul\u003e\n\u003cli\u003e12 HP Eurorack format module (units made before 2025 are 16 HP)\u003c\/li\u003e\n\u003cli\u003e10-pin Eurorack power header\u003c\/li\u003e\n\u003cli\u003e.984\" (25mm) maximum depth with power cable (units made before 2025 are 28mm max depth)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower consumption:\r\n\u003cul\u003e\n\u003cli\u003e+12V: 145mA\u003c\/li\u003e\n\u003cli\u003e-12V: 41mA\u003c\/li\u003e\n\u003cli\u003e+5V rail: not used\u003c\/li\u003e\n\u003cli\u003eConnect red stripe of power cable towards the bottom of the module, which is marked with a white stripe and the words -12V and POWER\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Inputs:\r\n\u003cul\u003e\n\u003cli\u003e20Hz to 10kHz (+\/-0.1dB); -6dB rolloff @ 20kHz\u003c\/li\u003e\n\u003cli\u003e21V peak-to-peak maximum before clipping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAudio Outputs:\r\n\u003cul\u003e\n\u003cli\u003e0Hz (DC) to 22kHz with maximum -1.8dB difference between file data and output\u003c\/li\u003e\n\u003cli\u003e+10.5V to -10.5V maximum output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eTrigger inputs:\r\n\u003cul\u003e\n\u003cli\u003eLatency: 0.7us typical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded with the Sampler:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e16GB micro SD card (class 10)\u003c\/li\u003e\n\u003cli\u003eSD adaptor\u003c\/li\u003e\n\u003cli\u003e10-to-16 pin power cable\u003c\/li\u003e\n\u003cli\u003eM3 Knurlie screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUser Manual:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/4mscompany.com\/media\/SAMPLER\/manual\/Sampler-manual-v1.0a.pdf\"\u003eSampler User Manual v1.0a\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLatest firmware:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/4mscompany.com\/media\/SAMPLER\/firmware\/SAMPLER-v1.0.1.wav\"\u003eFirmware v1.0.1 (wav file)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4ms","offers":[{"title":"Default Title","offer_id":51570035622166,"sku":null,"price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/sampler__63791.1747339776.1280.1280.jpg?v=1784248912","url":"https:\/\/boutiquepedalnyc.us\/products\/4ms-sampler","provider":"BPNYC","version":"1.0","type":"link"}