moddict Unending Case Beige [36HP]

Unending Case [36HP]

The Unending Case is a 36 HP case that can be powered by an existing case.

The body is CNC-machined from ABS in one piece, giving it a uniquely solid design and matte paint finish.

Power is provided by a SATA cable between a 2HP transport with a moddico port (SATA connector) that connects to the Eurorack bus board and a receiver with a moddico port that mounts in the 2HP space at the top of the case.

The receiver has three Eurorack power connectors.

Normally, there are three, and the moddict Dual Bus Cable can be used to increase the number of units to be connected. (Power supply capacity depends on the bus boards connected.)

Even if the case is filled, you can easily expand it with another Unsending Case!!

It is also convenient for those who use a large case because they can operate complex digital and controller modules at their fingertips.

Not having a large AC power adapter makes it easy to use on a desk.

The height of the case is 48mm, the same as the Groovebox.

Below are the specifications for the case, transport, and receiver:

Unending Case [MDC2361]

Case capacity: 36HP

Depth: 42mm (from the panel mounting surface)

Size: 191.5mm(W) 149mm(D) 48mm(H)

Material: ABS (body), rail (resin)

Rail mounting method: Slide nuts (6 sets)

→Rail is removable, so more nuts can be added.

Accessories: 10 mounting screws

moddico Transport [MDT2211]

Width: 2HP

Height: 18mm (from panel mounting surface)

Width: 2HP ・Height: 18mm (from the panel mounting surface) ・moddico ports: 2

→Two moddico ports are provided, but we recommend using only one.

Eurorack power supply bus board (input): 1 (16-pin)

Voltage that can be supplied to the Eurorack power bus board: 12V,-12V,5V

→The CV/GATE bus board is disconnected from the Eurorack power supply bus board.

Accessories: Eurorack power bus cable (16pin-16pin)

moddico Receiver [MDR2131]

Width: 2HP

Height: 18mm (from the panel mounting surface)

Moddico port: 1

Eurorack power supply bus board: 3 (16pin)

Accessories: Round SATA cable

*Precautions

The SATA connector is not electrically compatible with SATA devices. Never connect moddico to any SATA port other than moddico.

Never connect moddico to any SATA port other than moddico.

Moddict is not responsible for any damage to the device or module.

Eurorack does not support hot-swapping, which means plugging and unplugging the SATA cable after turning the Eurorack on and off.

Please turn off the power before connecting or disconnecting the cables to avoid possible malfunctions.

The case may have been slightly scratched during the manufacturing process.

Please avoid direct sunlight as much as possible to avoid discoloration of the resin on the rails.