moddict / TDC-you AUX2

moddict TDC-you AUX2

AUX2 is an expander module for ConsoleEQ4.

Connect the expansion ports on the back of the ConsoleEQ4 and AUX2 boards with the provided expansion cable.

(For detailed connection instructions, please refer to the included instruction manual.)

Two auxiliary busses can be added to the four inputs (post-EQ) of ConsoleEQ4.

The AUX bus is equipped with attenuators for each channel, and mixed signals for 1~4 channels can be output from OUT.

AUX 2 also has an expander output that can be used to increase the number of AUX buses by two.

（we were able to increased up to 4x AUX2 and it worked without any attenuation).

In fact, it can be directly connected to EXP4 as well (!!!)

EXP4 can be used like a matrix mixer because of its DC coupling.

Despite the large circuit size for a 6HP with a total of 16 OP-amps,  

by adopting a 4-layer board, a low profile is achieved on a single board.

Like the ConsoleEQ4 and EXP4, it is designed with dark gray hairline-coated aluminum panels.

Comes with a 1-year warranty 

Width:6HP

Depth: 25mm

Current consumption: 36mA (+12V) 36mA (-12V) 0mA (5V)

Included: extension cable, power cable, 2x M3 screws