{"title":"Eurorack Panning","description":"","products":[{"product_id":"intellijel-designs-planar-2","title":"Intellijel Designs Planar 2 Pre-Order","description":"\u003cp\u003e\u003cspan\u003eRecordable Vector Joystick\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eModulator Joy\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe most complex modulator is you. The Planar 2 puts macro control over six outputs—including a quad panning mixer—into your hands with a buttery smooth joystick. Record up to 30 seconds of your own movements, stretch it or mangle it with scan mode, use a trigger for playback, or just loop it—synced or not. Add yourself to your patch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eA Cornucopia of Control\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith its smoothly responsive precision joystick, Planar2 facilitates hands-on vector control of two entirely independent sets of outputs (quadrants A-D, and axis X\/Y), plus the ability to capture and playback your gestures. Recording your joystick movements enables the creation of organic and complex envelopes, wild and wobbly LFOs, or extended sonic evolutions. It mixes, morphs, routes and pans audio inputs; triggers gates; outputs control voltages and is itself, CV-controllable. Planar2 puts the ‘joy’ back in ‘joystick,’ and the ‘fun’ back in ‘function generator.’ Its multitasking and tactile interface makes it a flexible and unique control device, no matter what your musical genre.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVector control of two independent sets of outputs: one quadrant-based (outputs A, B, C, D) and one dual-axis based (outputs X and Y).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eX\/Y Controller: two-axis CV generator sends either unipolar (0V to +10V) or bipolar (-5V to +5V) signal out the X and Y outputs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFour Quadrant Controller: With nothing connected to inputs A-D, outputs A-D become joystick-controlled individual unipolar (0V to +10V) control voltage sources.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuad mixing \u0026amp; crossfading: Vector mixing and crossfading of four independent inputs (A, B, C, D) to either individual outputs or the mixed output.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuad panning: connect a mono source to Input A and use the joystick to pan it to any of the four outputs. Connect a stereo signal to Inputs A and C and pan it forward and backward in quadraphonic space.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuad routing: Send audio to Input A and patch outputs A-D to four different processors (i.e. VCF, wavefolder, delay, etc.), then use the joystick to dynamically route the signal through the different effects.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGate Generator: Generate gates either manually (by pressing the Manual Gate button) or automatically whenever the joystick is in motion.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCV Gesture Recorder: Record joystick motions (including gates) to play back either as 1-shot complex function generators or as looped, LFO-like functions. Start time and length can sync to an external trigger, and punch-in\/out recording is supported.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eExternal CV Inputs: In addition to its built-in joystick, Planar2 has two CV inputs, which allows external CV control of quadrant outputs A-D and axis outputs X\/Y. A mode switch alters how CV affects these outputs, allowing for some advanced automation techniques (such as circular and spinning motions) that would otherwise be difficult to automate.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWidth 14HP\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDepth 40mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePower 85mA @ +12V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e32mA @ -12V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-manual\"\u003e\n\u003cth colspan=\"2\"\u003eManual\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/manuals\/planar-2_manual_2018.09.13.pdf\"\u003eManual\u003c\/a\u003e (2018.09.13)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-firmware\"\u003e\n\u003cth colspan=\"2\"\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel%20Firmware%20Updater%20macOS%2020180912.zip\"\u003eMac\u003c\/a\u003e \/ \u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel_Firmware_Updater_Windows_2018-09-12.zip\"\u003eWin\u003c\/a\u003e (v1.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":51569889378582,"sku":null,"price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/White_Base_3_59_copy_2__10166.1686356639.1280.1280.jpg?v=1785048462"},{"product_id":"befaco-hexmix-6-channel-performance-mixer","title":"BEFACO HEXMIX  - 6-channel performance mixer","description":"\u003cp\u003e*Recommended to use with Hexpander for extra performance!!*\u003c\/p\u003e\n\u003cp\u003eBEFACO HEXMIX - 6channel performance mixer\u003c\/p\u003e\n\u003cp class=\"lead wrap\"\u003e6-channel performance mixer with EQs mutes and Pan\u003c\/p\u003e\n\u003cp\u003eHexmix System is a six channel performance mixer specially designed for Eurorack.\u003c\/p\u003e\n\u003cp\u003eThe system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.\u003c\/p\u003e\n\u003cp\u003eThe mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.\u003c\/p\u003e\n\u003cp\u003eThe unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a convetional tabletop mixing deck.\u003c\/p\u003e\n\u003cp\u003eHEXMIX FEATURES\u003cbr\u003eThis is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.\u003c\/p\u003e\n\u003cp\u003eInputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.\u003c\/p\u003e\n\u003cp\u003eThe signal passes through various process before being sent to the master section. All of this process are located and controlled at each Channel Strip.\u003cbr\u003eThe Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.\u003c\/p\u003e\n\u003cp\u003eMaster section has it’s own EQ and volume control for the mix of all channels. Master EQ is software than individual channel’s and it’s meant to provide control over the final mix.\u003cbr\u003eIt’s possible to change output level from line to synth wit ha switch located in the back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e106 mA +12V\u003c\/li\u003e\n\u003cli\u003e88 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937809686,"sku":null,"price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_1__55225.1571363274.1280.1280.jpg?v=1785019866"},{"product_id":"befaco-hexmix-hexpander-6ch-performance-mixer-expander","title":"BEFACO HEXMIX \u0026 HEXPANDER - 6CH performance mixer \u0026 expander","description":"\u003cp\u003e\u003cspan\u003eincludes both BEFACO HEXMIX \u0026amp; HEXPANDER\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 6CH performance mixer \u0026amp; expander\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*Use them together for fun mixing experience for your euerorack system!!!*\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e6-channel performance mixer with EQs mutes and Pan\u003c\/p\u003e\n\u003cp\u003eHexmix System is a six channel performance mixer specially designed for Eurorack.\u003c\/p\u003e\n\u003cp\u003eThe system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.\u003c\/p\u003e\n\u003cp\u003eThe mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.\u003c\/p\u003e\n\u003cp\u003eThe unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a convetional tabletop mixing deck.\u003c\/p\u003e\n\u003cp\u003eHEXMIX FEATURES\u003cbr\u003eThis is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.\u003c\/p\u003e\n\u003cp\u003eInputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.\u003c\/p\u003e\n\u003cp\u003eThe signal passes through various process before being sent to the master section. All of this process are located and controlled at each Channel Strip.\u003cbr\u003eThe Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.\u003c\/p\u003e\n\u003cp\u003eMaster section has it’s own EQ and volume control for the mix of all channels. Master EQ is software than individual channel’s and it’s meant to provide control over the final mix.\u003cbr\u003eIt’s possible to change output level from line to synth wit ha switch located in the back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e106 mA +12V\u003c\/li\u003e\n\u003cli\u003e88 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e-----------------------------------\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHexmix expander with 3 aux sends, PFL, individual outs per channel and master balanced out\u003c\/p\u003e\n\u003cp\u003eHexpander adds great functionality to Hexmix module. Featuring Three aux send with auxiliary returns, individual outputs for each channel, complete PFL system and balanced output.\u003cbr\u003eHexpander is designed to be placed on top of Hexmix. Expanding eurorack concept to 6u, allow every channel to be aligned as in traditional tabletop mixers.\u003c\/p\u003e\n\u003cp\u003eFor every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.\u003c\/p\u003e\n\u003cp\u003eEvery auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal pre or post fader\/EQ in parallel.\u003cbr\u003eReturns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set properly, for example, either to a guitar pedal or a FX module at synth level.\u003c\/p\u003e\n\u003cp\u003eHexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.\u003cbr\u003eFlip PFL switch to send that channel to the headphones out. With PFL\/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.\u003cbr\u003eLevel meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.\u003c\/p\u003e\n\u003cp\u003eEvery channel has individual 6,5\" jacks out at line level.Here you heve the signal of every channel post EQ.\u003cbr\u003eAs an addition, you have master balanced output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e137 mA +12V\u003c\/li\u003e\n\u003cli\u003e64 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569943478550,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_10__66156.1572636726.1280.1280.jpg?v=1784686265"},{"product_id":"make-noise-x-pan-5-channel-voltage-controlled-stereo-mixer","title":"Make Noise  X-PAN  5 channel Voltage Controlled Stereo Mixer","description":"\u003cp\u003eThe X-PAN music synthesizer module is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.\u003c\/p\u003e\n\u003cp\u003eX-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.\u003c\/p\u003e\n\u003cp\u003eX-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003efeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 signal inputs all routed to a dynamic stereo output\u003c\/li\u003e\n\u003cli\u003eContains 10 High Quality VCA circuits in just 10hp\u003c\/li\u003e\n\u003cli\u003eFully Voltage Controlled Panning, Cross-fading and Mixing\u003c\/li\u003e\n\u003cli\u003eEasy to maintain signal integrity with high headroom, low noise circuitry\u003c\/li\u003e\n\u003cli\u003eAudio Rate crossfading and panning, fluctuating stereo sidebands\u003c\/li\u003e\n\u003cli\u003eAux Stereo Inputs controlled by Stereo VCA with Combo Pot\u003c\/li\u003e\n\u003cli\u003ePart of a decentralized mix console integrated throughout the system along with Optomix, modDemix, Dynamix, and RxMx\u003c\/li\u003e\n\u003cli\u003eDirect Coupled for use as Complex CV router\u003c\/li\u003e\n\u003cli\u003ePairs well with QPAS and Morphagene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003especifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10hp\u003c\/li\u003e\n\u003cli\u003eMax Depth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower:\u003cbr\u003e145mA @ +12V\u003cbr\u003e110mA @ -12V\u003c\/li\u003e\n\u003cli\u003emanual:\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/makenoisemusic.com\/manuals\/x-pan-manual.pdf\" target=\"_blank\"\u003ex-pan-manual.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51569953898774,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/White_Base_3_59_copy_5__95597.1595358724.1280.1280.jpg?v=1784851769"},{"product_id":"black-noise-modular-voltage-processor","title":"Black Noise Modular VOLTAGE PROCESSOR","description":"\u003cp\u003eVOLTAGE PROCESSOR have been designed to pack a lot of features in a small module.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eHere a some of the features you can achieve with VOLTAGE PROCESSOR\u003cbr\u003e\u003cem\u003eYou can find how to setup those features in the manual below\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eDual VCA\u003cbr data-mce-fragment=\"1\"\u003eStereo VCA\u003cbr data-mce-fragment=\"1\"\u003eCV Crossfader 2:1\u003cbr data-mce-fragment=\"1\"\u003eCV Crossfader 1:2\u003cbr data-mce-fragment=\"1\"\u003eDual AM\u003cbr data-mce-fragment=\"1\"\u003eCV PAN\u003cbr data-mce-fragment=\"1\"\u003eDual Attenuator\u003cbr data-mce-fragment=\"1\"\u003eDual Inverter\u003cbr data-mce-fragment=\"1\"\u003eDual Offset generator\u003cbr data-mce-fragment=\"1\"\u003eDual Voltage generator\u003cbr data-mce-fragment=\"1\"\u003eDual Exponential converter\u003cbr data-mce-fragment=\"1\"\u003eLogarithmic converter\u003cbr data-mce-fragment=\"1\"\u003eDual PWM\u003cbr data-mce-fragment=\"1\"\u003eDual CV overdrive\u003cbr data-mce-fragment=\"1\"\u003eDual waveshaper\u003cbr data-mce-fragment=\"1\"\u003eComplex waveshaper\u003cbr data-mce-fragment=\"1\"\u003eDual RingMod\u003cbr data-mce-fragment=\"1\"\u003eRindMod\u003cbr data-mce-fragment=\"1\"\u003eCompressor\u003cbr data-mce-fragment=\"1\"\u003eSidechain compressor\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePanel Width\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e6HP\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModule Depth\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e20mm (skiff friendly)\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Consumption\u003cbr\u003e\u003c\/strong\u003e\u003cem\u003e+12V : 30mA\u003cbr\u003e-12V : 30mA\u003cbr\u003e+5V : 0mA\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/raw.githack.com\/BlackNoiseModular\/Eurorack\/main\/VOLTAGE%20PROCESSOR\/Manual\/BLACK-NOISE_Voltage-Processor_V1.0_Manual_V1.0.pdf\" target=\"_blank\" title=\"https:\/\/raw.githack.com\/BlackNoiseModular\/Eurorack\/main\/VOLTAGE%20PROCESSOR\/Manual\/BLACK-NOISE_Voltage-Processor_V1.0_Manual_V1.0.pdf\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/raw.githack.com\/BlackNoiseModular\/Eurorack\/main\/VOLTAGE%20PROCESSOR\/BOM\/ibom.html\" target=\"_blank\" title=\"https:\/\/raw.githack.com\/BlackNoiseModular\/Eurorack\/main\/VOLTAGE%20PROCESSOR\/BOM\/ibom.html\"\u003eBOM\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/raw.githack.com\/BlackNoiseModular\/Eurorack\/main\/VOLTAGE%20PROCESSOR\/BLACK-NOISE_Voltage-Processor_Build-Instructions_V1.pdf\" target=\"_blank\" title=\"https:\/\/raw.githack.com\/BlackNoiseModular\/Eurorack\/main\/VOLTAGE%20PROCESSOR\/BLACK-NOISE_Voltage-Processor_Build-Instructions_V1.pdf\"\u003eBuild Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Black Noise Modular","offers":[{"title":"Default Title","offer_id":51570009309462,"sku":null,"price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Voltage_processor__50225.1681934042.1280.1280.jpg?v=1784247008"},{"product_id":"boredbrain-xcelon-xp3","title":"Boredbrain xcelon xp3","description":"\u003cp\u003e\u003cspan\u003e3-CHANNEL STEREO MIX EXPANDER\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"features\"\u003e\n\u003cli\u003eAdds three stereo\/dual-mono channels to Xcelon mixer (up to two supported)\u003c\/li\u003e\n\u003cli\u003eTwo stereo FX sends and two stereo output mix busses selectable per-channel\u003c\/li\u003e\n\u003cli\u003eVariable input gain for both modular and line-level sources\u003c\/li\u003e\n\u003cli\u003eLong-travel volume faders with CV responsive LED indicators\u003c\/li\u003e\n\u003cli\u003eBalance controls with pan law curve and dual-mono crossfade mode\u003c\/li\u003e\n\u003cli\u003eClickless mutes and VU meters on all channels\u003c\/li\u003e\n\u003cli\u003eTwelve discrete control voltage inputs\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers for pre\/post-fader FX and meters, plus volume VCA mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"wp-block-heading has-nv-light-bg-color has-text-color\"\u003e\u003cstrong\u003eModular mixing expanded\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"has-nv-light-bg-color has-text-color has-medium-font-size\"\u003eXcelon XP3 is a three-channel stereo expander for the Xcelon eurorack mixer. The module’s channels are identical to those found on the main mixer. Up to two XP3 can connect to Xcelon, expanding the total number of mixer channels to either nine or twelve.\u003c\/p\u003e\n\u003ch3 class=\"wp-block-heading\"\u003eChannel Expansion\u003c\/h3\u003e\n\u003cp\u003eThe 22HP module has the same channel inputs, channel controls, direct outputs and rear jumpers as \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/xcelon\"\u003eXcelon\u003c\/a\u003e. The primary difference is that the expander lacks the mix outputs and FX i\/o section. This is because XP3 shares the two main mix busses and two FX sends busses with the main mixer.\u003c\/p\u003e\n\u003cp\u003eXP3 is connected to the main Xcelon mixer using the supplied 16-pin ribbon cable, from the port labeled \u003cstrong\u003eMIXER\u003c\/strong\u003e to one of the two expansion ports labeled \u003cstrong\u003eEXPANDER 1\u003c\/strong\u003e or \u003cstrong\u003eEXPANDER 2\u003c\/strong\u003e. These expansion ports are found on the backs of both modules. Because the mixer supports up to two XP3, a set of channel labels with 10, 11, and 12 are included to update the front panel.\u003c\/p\u003e\n\u003cp\u003eIt may be possible to connect more than two channel expanders using a flying bus cable, but low noise performance cannot be guaranteed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: The expander ports should \u003cstrong\u003eNOT\u003c\/strong\u003e be connected to a eurorack power bus or damage to the module(s) can occur.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Input\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eEach of the three channels has a pair of audio input jacks\u003cstrong\u003e (INPUT 7\u003c\/strong\u003e, \u003cstrong\u003eINPUT 8\u003c\/strong\u003e, etc.) for left and right stereo signals. The jacks are normalled such that a single mono source in the left jack is simply copied to the right. Alternatively, two discrete mono sources can also share a channel (see \u003cstrong\u003eXFADE\u003c\/strong\u003e). These AC-coupled coupled inputs accept typical eurorack-level audio signals, as well as line-level audio signals when boosted using the channel’s \u003cstrong\u003eGAIN\u003c\/strong\u003e control.\u003c\/p\u003e\n\u003cp\u003eThe four jacks directly below each pair of audio inputs are CV inputs, which allow for voltage control of the channel parameters. \u003cstrong\u003eVOL\u003c\/strong\u003e affects the volume within a range of 0 to +5V. By default, this control voltage input is biased by the fader position (summed), but in VCA mode it is attenuated by the fader (see Jumper Settings). \u003cstrong\u003eBAL\u003c\/strong\u003e affects the channel balance within a range of -5V to 5V (even with \u003cstrong\u003eXFADE\u003c\/strong\u003e enabled), while \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e affect their respective send levels within a range of 0 to +5V. These latter three control voltage inputs are all biased by their knob positions.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Control\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGAIN\u003c\/strong\u003e parameter is used to boost the channel’s input signal(s) up to +15 dB if necessary. Most eurorack audio sources may only need a small amount of gain, whereas line-level signals may require turning the knob up to the \u003cstrong\u003eLINE\u003c\/strong\u003e position. The red \u003cstrong\u003ePK\u003c\/strong\u003e (peak) indicator will illuminate just before either input signal becomes audibly distorted. For a clean mix, best practice is to set the \u003cstrong\u003eGAIN\u003c\/strong\u003e such that only loud transients trigger the \u003cstrong\u003ePK\u003c\/strong\u003e LED.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAL\u003c\/strong\u003e parameter adjusts the balance of the channel’s two input signals, and behaves much like a pan control, especially with a mono input signal. Control of the parameter is not linear, but instead implements a curve according to the -4.5 dB pan law. This yields a more natural sounding stereo panning.\u003c\/p\u003e\n\u003cp\u003eWhen the blue \u003cstrong\u003eXFADE\u003c\/strong\u003e button is engaged, the channel is configured in dual-mono mode. Both channel input signals are positioned to stereo center, and the \u003cstrong\u003eBAL\u003c\/strong\u003e parameter acts as a mono crossfader balancing the two signal levels. Signals that do not need stereo panning can then be doubled-up on a single channel, such as kick and snare drum, two different bass sounds, etc.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eVOL\u003c\/strong\u003e parameter adjusts the channel volume, and is also commonly referred to as the channel fader. Its 45mm vertical slider has a linear volume response for smooth fade ins and outs, with an entirely usable range. The brightness of the white LED indicates the volume position, and is of course responsive to incoming CV.\u003c\/p\u003e\n\u003cp\u003eNext to the volume control is a 5-segment \u003cstrong\u003eVU METER\u003c\/strong\u003e to help visualize signal level and dynamics. The meter is affected by both left and right channel signals. And although it does behave according to a decibel scale, the meter is intentionally biased upward for better resolution when comparing relative channel levels. By default, the \u003cstrong\u003eVU METER\u003c\/strong\u003e is post-fader, meaning it is affected by volume adjustments, but can optionally be configured pre-fader (see Jumper Settings).\u003c\/p\u003e\n\u003cp\u003eThe red \u003cstrong\u003eMUTE\u003c\/strong\u003e button, when activated, will effectively silence the channel with up to -93 dB of normal signal attenuation. Its electronically latching circuit is completely VCA-based with a very fast on\/off slew, eliminating any clicks or pops when muting or unmuting the channel.\u003c\/p\u003e\n\u003cp\u003eThe channel’s two gray knobs, \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e, are independent stereo effects sends. Using these parameters, an adjustable amount of the channel signal can be sent to the two shared effects busses \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e, which are commonly used for time-based effects such as delay and reverb. By default, both \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e are post-fader sends, meaning the amount of sent signal is also affected by the channel’s volume position. However, \u003cstrong\u003eFX1\u003c\/strong\u003e can be configured pre-fader (see Jumper Settings) to achieve a more than 50% wet mix of effect versus dry signal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAB\u003c\/strong\u003e switch assigns the channel output to one or both main output mix busses. In the leftmost and rightmost positions, the channel is routed to only one of the two busses, either A or B. In the middle position however, the channel is routed to both simultaneously, allowing for parallel processing, AFL monitoring (after fade listen), and other creative uses.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eDirect Outputs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eJust like the main mixer, XP3 is also equipped with several direct output ports to access individual channel signals for multi-track recording. Its bank of three stereo channels has two direct output ports, \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST, \u003c\/strong\u003eto tap the channel signals either before or after the volume faders.\u003c\/p\u003e\n\u003cp\u003eThese groupings of six signals are connected using an 8-pin cable to the optional direct output modules, Xcelon TRS and Xcelon DB25 (TBA), for balanced line outputs. They can be mixed and matched in any order, and both the \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST\u003c\/strong\u003e direct outputs for a bank of channels can be used simultaneously. This leaves the door open for future expansion such as dedicated cue monitoring and additional effects sends.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eJumper Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach channel has three custom settings found on the back of the module, which are configured using one or more jumpers.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-columns is-layout-flex wp-container-core-columns-layout-2 wp-block-columns-is-layout-flex\"\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVU METER\u003c\/th\u003e\n\u003cth\u003e1 jumper\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eMeter is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeter is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003ePRE is very common on DJ mixers, and is useful for adjusting the gain and visually identifying a signal before bringing it into the mix.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eFX SND1\u003c\/th\u003e\n\u003cth\u003e2 jumpers\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eSent signal is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSent signal is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003ePRE is useful (and necessary) to get a very washed-out effect where the effects mix is more than 50% wet.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVOL CV\u003c\/th\u003e\n\u003cth\u003e3 jumpers (or 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003eMOD\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eCV modulates volume with fader bias\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003eVCA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCV replaces bias voltage and fader attenuates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003eVCA allows the volume circuit to be used as the final VCA in a patch, saving space and modules. Simply patch an envelope into the \u003cstrong\u003eVOL\u003c\/strong\u003e CV input, and use the fader to adjust the level.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch4 class=\"wp-block-heading\"\u003etechnical specs\u003c\/h4\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Inputs:\u003c\/strong\u003e 6 x 3.5 mm jacks (3 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Inputs:\u003c\/strong\u003e 12 x 3.5 mm jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 100 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Input Gain:\u003c\/strong\u003e +15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 22 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.5 in (38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 oz (312 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +12 V 190 mA (250 max), -12 V 150 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"wp-block-heading\"\u003emix tips\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eGAIN FOR PERFORMANCE\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e– A useful tip for performance is to set each GAIN such that your mix sounds correct with all the faders up or at the same position. Now returning to a “balanced” mix is as simple moving faders back to the same position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO VCA PATCH\u003c\/strong\u003e – Save space in a case for live performance or save VCAs for other purposes by using the VCA mode jumper setting for VOL CV. This allows a typical envelope to be fed into the CV input, and the overall volume can still be adjusted normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% WET FX\u003c\/strong\u003e – If mix bus B is unused or not monitored, any channel can have a fully wet FX mix (no dry signal), even with rear jumpers set to POST. Just assign the channel to mix B (essentially muting it), be sure the FX return is assigned to mix A, and turn up the FX send of the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXFADE MUTATION\u003c\/strong\u003e – The XFADE feature can be used to “mutate” a sound, crossfading between to similar sounds or waveforms. This is especially interesting when modulating with a rapidly changing CV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFX RETURNS MUTE\u003c\/strong\u003e – Although the FX returns do not have mute buttons, the AB switch can be used to quickly remove them from either the A or B mix, which is still very effective during a live mix.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"xcelon-channel-wireframe-v1.0.png\" class=\"__mce_add_custom__\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-channel-wireframe-v1.0.png?v=1784247487\" title=\"xcelon-channel-wireframe-v1.0.png\" width=\"277\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016452886,"sku":null,"price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon_xp3__64470.1701480861.1280.1280.jpg?v=1784247500"},{"product_id":"boredbrain-xcelon-xcelon-xp3-bundle","title":"Boredbrain xcelon \u0026 xcelon xp3 Bundle Pre-Order","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain xcelon \u0026amp; xcelon xp3 Bundle\u003c\/strong\u003e\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016518422,"sku":null,"price":1378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon_XP3_bundle__24197.1701481085.1280.1280.jpg?v=1784247498"},{"product_id":"boredbrain-xcelon","title":"Boredbrain xcelon Pre-Order","description":"\u003cp\u003eTRUE STEREO VOLTAGE-CONTROLLED MIXER\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-columns has-1-columns has-desktop-equal-layout has-tablet-equal-layout has-mobile-equal-layout has-vertical-unset has-default-gap\" id=\"wp-block-themeisle-blocks-advanced-columns-217aebea\"\u003e\n\u003cdiv class=\"innerblocks-wrap\"\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-column\" id=\"wp-block-themeisle-blocks-advanced-column-f0498e9e\"\u003e\n\u003ch2 class=\"wp-block-heading has-nv-light-bg-color has-text-color\"\u003e\u003cstrong\u003eA modular mixing powerhouse\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"has-nv-light-bg-color has-text-color has-medium-font-size\"\u003eXcelon is an all-analog six-channel stereo audio mixer for eurorack modular systems. With an interface designed for immediate hands-on control and visual feedback, plus extensive CV and expandability, the module is a powerful mixing tool for both performance and production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-columns has-2-columns has-desktop-equal-layout has-tablet-equal-layout has-mobile-collapsedRows-layout has-vertical-top has-default-gap\" id=\"wp-block-themeisle-blocks-advanced-columns-cba8d97f\"\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-columns-overlay\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"innerblocks-wrap\"\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-column\" id=\"wp-block-themeisle-blocks-advanced-column-b1306ef4\"\u003e\n\u003cul class=\"features has-nv-light-bg-color has-text-color has-link-color wp-elements-10fa585b52ce8590dda0aaae20108526\"\u003e\n\u003cli\u003eSix stereo\/dual-mono channels with low-noise analog circuitry\u003c\/li\u003e\n\u003cli\u003eTwo stereo FX sends and two dedicated FX returns\u003c\/li\u003e\n\u003cli\u003eTwo stereo output mix busses selectable per-channel\u003c\/li\u003e\n\u003cli\u003eVariable input gain for both modular and line-level sources\u003c\/li\u003e\n\u003cli\u003eLong-travel volume faders with CV responsive LED indicators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-column\" id=\"wp-block-themeisle-blocks-advanced-column-b6824fe0\"\u003e\n\u003cul class=\"features has-nv-light-bg-color has-text-color has-link-color wp-elements-3a5e7f165b6c05731e8ac1e594f077ac\"\u003e\n\u003cli\u003eBalance controls with pan law curve and dual-mono crossfade mode\u003c\/li\u003e\n\u003cli\u003eClickless mutes and VU meters on all channels\u003c\/li\u003e\n\u003cli\u003eTwenty-six discrete control voltage inputs\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers for pre\/post-fader FX and meters, plus volume VCA mode\u003c\/li\u003e\n\u003cli\u003eExpansion ports for channel expanders, direct outputs, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 48 HP module consists of three main sections. On the left side are the channel inputs (both audio and CV), in the middle are the channel controls, and on the right are the mix outputs, plus FX i\/o and controls.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Input\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eEach of the six channels has a pair of audio input jacks\u003cstrong\u003e (INPUT 1\u003c\/strong\u003e, \u003cstrong\u003eINPUT 2\u003c\/strong\u003e, etc.) for left and right stereo signals. The jacks are normalled such that a single mono source in the left jack is simply copied to the right. Alternatively, two discrete mono sources can also share a channel (see \u003cstrong\u003eXFADE\u003c\/strong\u003e). These AC-coupled coupled inputs accept typical eurorack-level audio signals, as well as line-level audio signals when boosted using the channel’s \u003cstrong\u003eGAIN\u003c\/strong\u003e control.\u003c\/p\u003e\n\u003cp\u003eThe four jacks directly below each pair of audio inputs are CV inputs, which allow for voltage control of the channel parameters. \u003cstrong\u003eVOL\u003c\/strong\u003e affects the volume within a range of 0 to +5V. By default, this control voltage input is biased by the fader position (summed), but in VCA mode it is attenuated by the fader (see Jumper Settings). \u003cstrong\u003eBAL\u003c\/strong\u003e affects the channel balance within a range of -5V to 5V (even with \u003cstrong\u003eXFADE\u003c\/strong\u003e enabled), while \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e affect their respective send levels within a range of 0 to +5V. These latter three control voltage inputs are all biased by their knob positions.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Control\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGAIN\u003c\/strong\u003e parameter is used to boost the channel’s input signal(s) up to +15 dB if necessary. Most eurorack audio sources may only need a small amount of gain, whereas line-level signals may require turning the knob up to the \u003cstrong\u003eLINE\u003c\/strong\u003e position. The red \u003cstrong\u003ePK\u003c\/strong\u003e (peak) indicator will illuminate just before either input signal becomes audibly distorted. For a clean mix, best practice is to set the \u003cstrong\u003eGAIN\u003c\/strong\u003e such that only loud transients trigger the \u003cstrong\u003ePK\u003c\/strong\u003e LED.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAL\u003c\/strong\u003e parameter adjusts the balance of the channel’s two input signals, and behaves much like a pan control, especially with a mono input signal. Control of the parameter is not linear, but instead implements a curve according to the -4.5 dB pan law. This yields a more natural sounding stereo panning.\u003c\/p\u003e\n\u003cp\u003eWhen the blue \u003cstrong\u003eXFADE\u003c\/strong\u003e button is engaged, the channel is configured in dual-mono mode. Both channel input signals are positioned to stereo center, and the \u003cstrong\u003eBAL\u003c\/strong\u003e parameter acts as a mono crossfader balancing the two signal levels. Signals that do not need stereo panning can then be doubled-up on a single channel, such as kick and snare drum, two different bass sounds, etc.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eVOL\u003c\/strong\u003e parameter adjusts the channel volume, and is also commonly referred to as the channel fader. Its 45mm vertical slider has a linear volume response for smooth fade ins and outs, with an entirely usable range. The brightness of the white LED indicates the volume position, and is of course responsive to incoming CV.\u003c\/p\u003e\n\u003cp\u003eNext to the volume control is a 5-segment \u003cstrong\u003eVU METER\u003c\/strong\u003e to help visualize signal level and dynamics. The meter is affected by both left and right channel signals. And although it does behave according to a decibel scale, the meter is intentionally biased upward for better resolution when comparing relative channel levels. By default, the \u003cstrong\u003eVU METER\u003c\/strong\u003e is post-fader, meaning it is affected by volume adjustments, but can optionally be configured pre-fader (see Jumper Settings).\u003c\/p\u003e\n\u003cp\u003eThe red \u003cstrong\u003eMUTE\u003c\/strong\u003e button, when activated, will effectively silence the channel with up to -93 dB of normal signal attenuation. Its electronically latching circuit is completely VCA-based with a very fast on\/off slew, eliminating any clicks or pops when muting or unmuting the channel.\u003c\/p\u003e\n\u003cp\u003eThe channel’s two gray knobs, \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e, are independent stereo effects sends. Using these parameters, an adjustable amount of the channel signal can be sent to the two shared effects busses \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e, which are commonly used for time-based effects such as delay and reverb. By default, both \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e are post-fader sends, meaning the amount of sent signal is also affected by the channel’s volume position. However, \u003cstrong\u003eFX1\u003c\/strong\u003e can be configured pre-fader (see Jumper Settings) to achieve a more than 50% wet mix of effect versus dry signal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAB\u003c\/strong\u003e switch assigns the channel output to one or both main output mix busses. In the leftmost and rightmost positions, the channel is routed to only one of the two busses, either A or B. In the middle position however, the channel is routed to both simultaneously, allowing for parallel processing, AFL monitoring (after fade listen), and other creative uses.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eMix Outputs \u0026amp; FX I\/O\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eXcelon’s two aforementioned output mix busses are available at the pairs of jacks \u003cstrong\u003eMIX OUT A\u003c\/strong\u003e and \u003cstrong\u003eMIX OUT B\u003c\/strong\u003e. These eurorack-level stereo outputs can be patched and processed separately before reaching an output module like \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/monitr\/\"\u003eMonitr\u003c\/a\u003e. Such processing modules may include stereo equalizers like \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/eqx5\/\"\u003eEQx5\u003c\/a\u003e, filters, compressors, limiters, crossfaders, etc.\u003c\/p\u003e\n\u003cp\u003eThe two pairs of output jacks \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e contain eurorack-level stereo submixes created with the effects sends controls of all channels. As previously mentioned, these are commonly patched into reverb and delay, but may also be used for other purposes like creating headphone mixes. If only the left output jack of \u003cstrong\u003eFX SND 1\u003c\/strong\u003e or \u003cstrong\u003eFX SND 2\u003c\/strong\u003e is used, any signals on the right side will be summed with the left so they are not lost.\u003c\/p\u003e\n\u003cp\u003eThe two pairs of input jacks \u003cstrong\u003eFX RTN 1\u003c\/strong\u003e and \u003cstrong\u003eFX RTN 2\u003c\/strong\u003e are dedicated stereo effects returns, where the output signals of effects can return to the mixer. Each return has its own manual level control, \u003cstrong\u003eRTN 1\u003c\/strong\u003e and \u003cstrong\u003eRTN 2\u003c\/strong\u003e, and CV input directly above. The CV inputs affect levels within a range of 0 to +5V and are biased by their knob positions. Additionally, the two returns share an \u003cstrong\u003eAB\u003c\/strong\u003e switch to assign them to either or both mix busses.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The effects returns can be used alternatively as extra stereo inputs.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eChannel Expansion\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eXcelon has two expansion ports to optionally add more channels to the system. These 16-pin ports are labeled \u003cstrong\u003eEXPANDER 1\u003c\/strong\u003e and \u003cstrong\u003eEXPANDER 2\u003c\/strong\u003e and can be found on the the back of the module. Expander modules connected to these ports, such as \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/xcelon-xp3\"\u003eXcelon XP3\u003c\/a\u003e, will have access to the two stereo mix busses and two stereo effects send busses. It may be possible to connect more than two channel expanders using a flying bus cable, but low noise performance cannot be guaranteed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: The expander ports should \u003cstrong\u003eNOT\u003c\/strong\u003e be connected to a eurorack power bus or damage to the module(s) can occur.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003cimg alt=\"xcelon-xp3.jpg\" class=\"__mce_add_custom__\" height=\"800\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-xp3.jpg?v=1784247486\" title=\"xcelon-xp3.jpg\" width=\"793\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eDirect Outputs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe module is also equipped with several direct output ports to access individual channel signals for multi-track recording. Each bank of three stereo channels has two direct output ports, \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST, \u003c\/strong\u003eto tap the channel signals either before or after the volume faders. An additional port provides direct access to the two stereo returns and mix A.\u003c\/p\u003e\n\u003cp\u003eThese groupings of six signals are connected using an 8-pin cable to the optional direct output modules, Xcelon TRS and Xcelon DB25 (TBA), for balanced line outputs. They can be mixed and matched in any order, and both the \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST\u003c\/strong\u003e direct outputs for a bank of channels can be used simultaneously. This leaves the door open for future expansion such as dedicated cue monitoring and additional effects sends.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eJumper Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach channel has three custom settings found on the back of the module, which are configured using one or more jumpers.\u003c\/p\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVU METER\u003c\/th\u003e\n\u003cth\u003e1 jumper\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eMeter is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeter is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003ePRE is very common on DJ mixers, and is useful for adjusting the gain and visually identifying a signal before bringing it into the mix.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eFX SND1\u003c\/th\u003e\n\u003cth\u003e2 jumpers\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eSent signal is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSent signal is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003ePRE is useful (and necessary) to get a very washed-out effect where the effects mix is more than 50% wet.\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVOL CV\u003c\/th\u003e\n\u003cth\u003e3 jumpers (or 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003eMOD\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eCV modulates volume with fader bias\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003eVCA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCV replaces bias voltage and fader attenuates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVCA allows the volume circuit to be used as the final VCA in a patch, saving space and modules. Simply patch an envelope into the \u003cstrong\u003eVOL\u003c\/strong\u003e CV input, and use the fader to adjust the level.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 class=\"wp-block-heading\"\u003etechnical specs\u003c\/h4\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Inputs:\u003c\/strong\u003e 16 x 3.5 mm jacks (8 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Outputs:\u003c\/strong\u003e 8 x 3.5 mm jacks (4 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Inputs:\u003c\/strong\u003e 26 x 3.5 mm jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 100 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Input Gain:\u003c\/strong\u003e +15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 48 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.5 in (38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 oz (680 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +12 V 395 mA (470 max), -12 V 320 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"wp-block-heading\"\u003emix tips\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eGAIN FOR PERFORMANCE\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e– A useful tip for performance is to set each GAIN such that your mix sounds correct with all the faders up or at the same position. Now returning to a “balanced” mix is as simple moving faders back to the same position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO VCA PATCH\u003c\/strong\u003e – Save space in a case for live performance or save VCAs for other purposes by using the VCA mode jumper setting for VOL CV. This allows a typical envelope to be fed into the CV input, and the overall volume can still be adjusted normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% WET FX\u003c\/strong\u003e – If mix bus B is unused or not monitored, any channel can have a fully wet FX mix (no dry signal), even with rear jumpers set to POST. Just assign the channel to mix B (essentially muting it), be sure the FX return is assigned to mix A, and turn up the FX send of the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXFADE MUTATION\u003c\/strong\u003e – The XFADE feature can be used to “mutate” a sound, crossfading between to similar sounds or waveforms. This is especially interesting when modulating with a rapidly changing CV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFX RETURNS MUTE\u003c\/strong\u003e – Although the FX returns do not have mute buttons, the AB switch can be used to quickly remove them from either the A or B mix, which is still very effective during a live mix.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"xcelon-channel-wireframe-v1.0.png\" class=\"__mce_add_custom__\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-channel-wireframe-v1.0_c1e3410a-ec10-44f4-a0aa-a1c54448c792.png?v=1784247490\" title=\"xcelon-channel-wireframe-v1.0.png\" width=\"277\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016616726,"sku":null,"price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon__78437.1701480422.1280.1280.jpg?v=1784247499"},{"product_id":"worng-electronics-vertex","title":"WORNG Electronics Vertex","description":"\u003cp class=\"body\"\u003eVertex is a stereo VCA with some clever tricks up its sleeve to give you more control over the stereo domain. Vertex contains four analogue VCAs configured in such a way as to give you voltage control of the amplitude of a stereo signal (or make a mono signal stereo) as well as having control of the balance or panning of the signal.\u003cbr\u003e\u003cbr\u003eEasily patch up a stereo signal path with a single envelope generator, skew your stereo image or pan a mono signal with CV. Vertex also takes advantage of the VCAs used to be able to saturate at unity gain without distorting your audio signal. This means that you can waveshape an AD envelope into an AHD using the Skew control to add punch to your patch, and use the Skew CV to dynamically alter the envelope timing to change the relative loudness between the Left and Right signals while still keeping the peak signal levels the same.\u003cbr\u003e\u003cbr\u003eVertex is also a great tool for controlling the dynamics of an XY signal for oscilloscope or vector laser patches. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e‍\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"body\"\u003eWidth: 8hp\u003c\/li\u003e\n\u003cli class=\"body\"\u003eDepth: 25mm\u003c\/li\u003e\n\u003cli class=\"body\"\u003eCurrent Draw:\u003cbr\u003e+12V: 45mA\u003cbr\u003e-12V: 45mA\u003cbr\u003e+5V: 0mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca class=\"button w-button\" href=\"https:\/\/cdn.prod.website-files.com\/5a1bddaccc80bd0001f015dd\/5e885756bebe7d2050fd3f51_Vertex%20manual%20v1.00.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"WORNG Electronics","offers":[{"title":"Default Title","offer_id":51570036474134,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Vertex__46155.1752963450.1280.1280.jpg?v=1784249009"},{"product_id":"worng-electronics-soundstage-ii","title":"WORNG Electronics SoundStage II Pre-Order","description":"\u003cp class=\"body\"\u003eSoundStage II is a stereo mixer module unlike any other. Completely reimagining what a mixer needs to be in a Eurorack system, SoundStage helps you build your mix just by patching your voices in. \u003cbr\u003e\u003cbr\u003eInputs are placed in the stereo field depending on their horizontal patch position left to right, and placed in the frequency spectrum depending on vertical patch position, with twenty carefully tuned analogue resonant -12dB\/octave Sallen-Key filters to give definition to low, low mid, mid, high mid and high voices. \u003cbr\u003e\u003cbr\u003eDepth of filtering and output level have dedicated controls and bipolar CV inputs, allowing creative uses such as sidechain compression and rhythmic filtering. \u003cbr\u003e\u003cbr\u003eSoundStage II improves on the original with an improved Depth control circuit, added (fully filtered) FX send and return, better low end response, better power consumption, and a log VCA on the output for better response when patching compression or expansion on the outputs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"body\"\u003eWidth: 14hp\u003c\/li\u003e\n\u003cli class=\"body\"\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli class=\"body\"\u003eCurrent draw:\u003cbr\u003e+12V: 130mA\u003cbr\u003e-12V: 130mA\u003cbr\u003e+5V: 0mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca class=\"button w-button\" href=\"https:\/\/cdn.prod.website-files.com\/5a1bddaccc80bd0001f015dd\/64de0e57df7d0876a9a58e26_SoundStage%20II%20manual%20v1.00.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"WORNG Electronics","offers":[{"title":"Default Title","offer_id":51570036506902,"sku":null,"price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Soundstage_2__74778.1752964013.1280.1280.jpg?v=1784249006"}],"url":"https:\/\/boutiquepedalnyc.us\/collections\/panning.oembed","provider":"BPNYC","version":"1.0","type":"link"}