{"title":"Eurorack Mixer","description":"","products":[{"product_id":"make-noise-0-coast-desktop-synths","title":"Make Noise   0-COAST Desktop Synths","description":"\u003cp\u003eThe 0-COAST is a single voice patchable synthesizer. It’s name reflects the fact that it utilizes techniques from both the Moog and Buchla paradigms (aka “East Coast,” and “West Coast,” due to their locations), but is loyal to neither and thus implements “no coast synthesis.”\u003c\/p\u003e\n\u003cp\u003eWhile the 0-COAST utilizes classic modular synthesis techniques, we designed it to operate with or without the use of patch cables. The necessary connections have been made from circuit to circuit so it operates as an expressive, musical MonoSynth. Using only the MIDI controller of your choice you could apply new timbres to your existing musical forms!\u003c\/p\u003e\n\u003cp\u003eUsing the included Patch Cables you could get more scientific, experimenting with new ways to wire up the circuits. You might even forgo MIDI altogether, disappearing into a cloud of analog FM induced Sidebands and harmonics scattered around a single fundamental drone that has nothing to do with any form of music you’ve ever known.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNEW revision firmware \u003ca href=\"http:\/\/www.makenoisemusic.com\/content\/manuals\/0coast_154update.zip\"\u003eNoCoast1.5.4\u003c\/a\u003e adds Portamento and other MIDI features. Download today!\u003c\/li\u003e\n\u003cli\u003e2 Channels of MIDI to CV and MIDI to Gate\u003c\/li\u003e\n\u003cli\u003eVoltage Control of all circuits\u003c\/li\u003e\n\u003cli\u003ePatchable w\/ 13 Sources and 14 Destinations\u003c\/li\u003e\n\u003cli\u003eCompatible w\/ Eurorack Modular Synthesizer Signals\u003c\/li\u003e\n\u003cli\u003eSync to MIDI Clock\u003c\/li\u003e\n\u003cli\u003eDual mode MIDI Controlled Arppegiator\u003c\/li\u003e\n\u003cli\u003eTriangle Core Analog VCO\u003c\/li\u003e\n\u003cli\u003eUncommon Timbral Animation using OVERTONE \u0026amp; MULTIPLY\u003c\/li\u003e\n\u003cli\u003eUnique Transistor Based Low Pass Gate DYNAMICS\u003c\/li\u003e\n\u003cli\u003eExternal Audio Input for combining w\/ outside sounds\u003c\/li\u003e\n\u003cli\u003eHeadphone and Line Level Amplifier\u003c\/li\u003e\n\u003cli\u003eSmall Rugged Steel Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 5.5 x 9 x .75 inches\u003c\/li\u003e\n\u003cli\u003eWeight: l.7 lbs.\u003c\/li\u003e\n\u003cli\u003ePower Requirement:\u003cbr\u003e+15VDC on 2.1mm Tip Positive Connector\u003c\/li\u003e\n\u003cli\u003eIncludes Power Adapter, MIDI Adapter,\u003cbr\u003eMini to 1\/4\" Jack Adapter Cable, Patch Cables\u003c\/li\u003e\n\u003cli\u003eRetail Price: $499\u003c\/li\u003e\n\u003cli\u003emanual:\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/makenoisemusic.com\/manuals\/0-coast_manual.pdf\" target=\"_blank\"\u003e0-coast_manual.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/makenoisemusic.com\/manuals\/0coast_154update.zip\" target=\"_blank\"\u003e0coast_154update.zip\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/makenoisemusic.com\/manuals\/0-coast_programmer_m4l.zip\" target=\"_blank\"\u003e0-coast_programmer_m4l.zip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51569888133398,"sku":null,"price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_29__44863.1686240423.1280.1280.jpg?v=1784787269"},{"product_id":"intellijel-designs-planar-2","title":"Intellijel Designs Planar 2 Pre-Order","description":"\u003cp\u003e\u003cspan\u003eRecordable Vector Joystick\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eModulator Joy\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe most complex modulator is you. The Planar 2 puts macro control over six outputs—including a quad panning mixer—into your hands with a buttery smooth joystick. Record up to 30 seconds of your own movements, stretch it or mangle it with scan mode, use a trigger for playback, or just loop it—synced or not. Add yourself to your patch.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eA Cornucopia of Control\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWith its smoothly responsive precision joystick, Planar2 facilitates hands-on vector control of two entirely independent sets of outputs (quadrants A-D, and axis X\/Y), plus the ability to capture and playback your gestures. Recording your joystick movements enables the creation of organic and complex envelopes, wild and wobbly LFOs, or extended sonic evolutions. It mixes, morphs, routes and pans audio inputs; triggers gates; outputs control voltages and is itself, CV-controllable. Planar2 puts the ‘joy’ back in ‘joystick,’ and the ‘fun’ back in ‘function generator.’ Its multitasking and tactile interface makes it a flexible and unique control device, no matter what your musical genre.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eVector control of two independent sets of outputs: one quadrant-based (outputs A, B, C, D) and one dual-axis based (outputs X and Y).\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eX\/Y Controller: two-axis CV generator sends either unipolar (0V to +10V) or bipolar (-5V to +5V) signal out the X and Y outputs.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFour Quadrant Controller: With nothing connected to inputs A-D, outputs A-D become joystick-controlled individual unipolar (0V to +10V) control voltage sources.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuad mixing \u0026amp; crossfading: Vector mixing and crossfading of four independent inputs (A, B, C, D) to either individual outputs or the mixed output.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuad panning: connect a mono source to Input A and use the joystick to pan it to any of the four outputs. Connect a stereo signal to Inputs A and C and pan it forward and backward in quadraphonic space.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eQuad routing: Send audio to Input A and patch outputs A-D to four different processors (i.e. VCF, wavefolder, delay, etc.), then use the joystick to dynamically route the signal through the different effects.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eGate Generator: Generate gates either manually (by pressing the Manual Gate button) or automatically whenever the joystick is in motion.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCV Gesture Recorder: Record joystick motions (including gates) to play back either as 1-shot complex function generators or as looped, LFO-like functions. Start time and length can sync to an external trigger, and punch-in\/out recording is supported.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eExternal CV Inputs: In addition to its built-in joystick, Planar2 has two CV inputs, which allows external CV control of quadrant outputs A-D and axis outputs X\/Y. A mode switch alters how CV affects these outputs, allowing for some advanced automation techniques (such as circular and spinning motions) that would otherwise be difficult to automate.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWidth 14HP\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDepth 40mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePower 85mA @ +12V\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e32mA @ -12V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-manual\"\u003e\n\u003cth colspan=\"2\"\u003eManual\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/manuals\/planar-2_manual_2018.09.13.pdf\"\u003eManual\u003c\/a\u003e (2018.09.13)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-firmware\"\u003e\n\u003cth colspan=\"2\"\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel%20Firmware%20Updater%20macOS%2020180912.zip\"\u003eMac\u003c\/a\u003e \/ \u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel_Firmware_Updater_Windows_2018-09-12.zip\"\u003eWin\u003c\/a\u003e (v1.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":51569889378582,"sku":null,"price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/White_Base_3_59_copy_2__10166.1686356639.1280.1280.jpg?v=1785048462"},{"product_id":"moddict-tdc-you-console-eq4","title":"moddict \/ TDC-you Console EQ4","description":"\u003cp class=\"p1\"\u003e4ch 3Band EQ + Unity Mixer module \"Console EQ4\" …\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ejointly developed by Moddict and Studio You's effect pedal brand \"TDC-you\" !!!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eMade in JAPAN!\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNow available thru Boutique Pedal NYC in San Diego CA!!!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e4ch 3band EQ + Unity Mixer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e\u003cspan class=\"s1\"\u003e・\u003c\/span\u003e4ch 3band EQ (Audio only)\u003cbr\u003e \u003cspan class=\"s1\"\u003e・\u003c\/span\u003e3ch Unity Mixer (Audio or CV)\u003cbr\u003e \u003cspan class=\"s1\"\u003e・\u003c\/span\u003eIf EQ's out is not connected, connect to Unity Mixer by internal connection (Max 7ch mix)\u003cbr\u003e \u003cspan class=\"s1\"\u003e・\u003c\/span\u003eSelf-oscillation mode !!!!(When LOW EQ and MID are set to the LOW side and a strong boost is applied)\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003e74 mA +12V\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e75 mA -12V\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e0 mA 5V\u003c\/li\u003e\n\u003cli class=\"li2\"\u003e36 mm deep\u003c\/li\u003e\n\u003cli class=\"li3\"\u003e\u003cspan class=\"s3\"\u003e\u003cbr\u003e \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s4\"\u003e\u003cstrong\u003e12 HP\u003c\/strong\u003e \u003ca href=\"https:\/\/www.modulargrid.net\/e\/modules\/browser?SearchFunction=46\u0026amp;order=tag\u0026amp;direction=asc\"\u003e\u003cspan class=\"s5\"\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p4\"\u003e\u003cspan class=\"s4\"\u003e#Equalizer #mixer #utility #eurorack #modularsynth\u003c\/span\u003e\u003c\/p\u003e","brand":"Moddict","offers":[{"title":"Default Title","offer_id":51569932108054,"sku":null,"price":369.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/console_eq4__19690.1686473353.1280.1280.jpg?v=1785286019"},{"product_id":"befaco-stmix","title":"BEFACO STMIX","description":"\u003cp class=\"lead wrap\"\u003e4 channel stereo mixer w\/ aux input\u003c\/p\u003e\n\u003cp\u003eStmix is a compact 4 channel stereo mixer with an Auxilliar input. This input will allow us to chain a few of them or to insert an extra fifth input.\u003cbr\u003eThis module is compatible with our Hexmix system, and can be internally connected to hexmix module to add the output of STMIX to your main mix.\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003cbr\u003e– Four channels stereo inputs with volume control\u003cbr\u003e– Aux input straight to the Mix out\u003cbr\u003e– Level metter LEDs\u003cbr\u003e– Connector in the back to interface with Hexmix module.\u003c\/p\u003e\n\u003cp\u003eSPECS\u003cbr\u003e– Current needs: +12V: 8mA, -12V: 10mA\u003cbr\u003e– Width: 6 HP\u003cbr\u003e– Depth: 20 mm\u003cbr\u003e– Alluminium, heat-treated front panel\u003cbr\u003e– Designed, kits prepared and completed modules assembled in Barcelona\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 mA +12V\u003c\/li\u003e\n\u003cli\u003e10 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e20 mm deep\u003c\/li\u003e\n\u003cli\u003e6HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937744150,"sku":null,"price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Blank_1U_6hp_copy_2__49094.1600825473.1280.1280.jpg?v=1784675901"},{"product_id":"befaco-hexpander-hexmix-expander","title":"BEFACO HEXPANDER -Hexmix expander","description":"\u003cp class=\"lead wrap\"\u003eUse it with your Hexmix for more performance!\u003c\/p\u003e\n\u003cp class=\"lead wrap\"\u003eHexmix expander with 3 aux sends, PFL, individual outs per channel and master balanced out\u003c\/p\u003e\n\u003cp\u003eHexpander adds great functionality to Hexmix module. Featuring Three aux send with auxiliary returns, individual outputs for each channel, complete PFL system and balanced output.\u003cbr\u003eHexpander is designed to be placed on top of Hexmix. Expanding eurorack concept to 6u, allow every channel to be aligned as in traditional tabletop mixers.\u003c\/p\u003e\n\u003cp\u003eFor every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.\u003c\/p\u003e\n\u003cp\u003eEvery auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal pre or post fader\/EQ in parallel.\u003cbr\u003eReturns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set properly, for example, either to a guitar pedal or a FX module at synth level.\u003c\/p\u003e\n\u003cp\u003eHexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.\u003cbr\u003eFlip PFL switch to send that channel to the headphones out. With PFL\/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.\u003cbr\u003eLevel meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.\u003c\/p\u003e\n\u003cp\u003eEvery channel has individual 6,5\" jacks out at line level.Here you heve the signal of every channel post EQ.\u003cbr\u003eAs an addition, you have master balanced output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e137 mA +12V\u003c\/li\u003e\n\u003cli\u003e64 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937776918,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_2__97931.1571362604.1280.1280.jpg?v=1785019896"},{"product_id":"befaco-hexmix-6-channel-performance-mixer","title":"BEFACO HEXMIX  - 6-channel performance mixer","description":"\u003cp\u003e*Recommended to use with Hexpander for extra performance!!*\u003c\/p\u003e\n\u003cp\u003eBEFACO HEXMIX - 6channel performance mixer\u003c\/p\u003e\n\u003cp class=\"lead wrap\"\u003e6-channel performance mixer with EQs mutes and Pan\u003c\/p\u003e\n\u003cp\u003eHexmix System is a six channel performance mixer specially designed for Eurorack.\u003c\/p\u003e\n\u003cp\u003eThe system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.\u003c\/p\u003e\n\u003cp\u003eThe mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.\u003c\/p\u003e\n\u003cp\u003eThe unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a convetional tabletop mixing deck.\u003c\/p\u003e\n\u003cp\u003eHEXMIX FEATURES\u003cbr\u003eThis is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.\u003c\/p\u003e\n\u003cp\u003eInputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.\u003c\/p\u003e\n\u003cp\u003eThe signal passes through various process before being sent to the master section. All of this process are located and controlled at each Channel Strip.\u003cbr\u003eThe Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.\u003c\/p\u003e\n\u003cp\u003eMaster section has it’s own EQ and volume control for the mix of all channels. Master EQ is software than individual channel’s and it’s meant to provide control over the final mix.\u003cbr\u003eIt’s possible to change output level from line to synth wit ha switch located in the back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e106 mA +12V\u003c\/li\u003e\n\u003cli\u003e88 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937809686,"sku":null,"price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_1__55225.1571363274.1280.1280.jpg?v=1785019866"},{"product_id":"befaco-hexmix-vca-six-chanel-vca-mixer","title":"BEFACO HexMix VCA - Six chanel VCA \/ Mixer","description":"\u003cp class=\"lead wrap\"\u003eSix chanel VCA \/ Mixer with continuous shape function Log-Lin-expo on a pot.\u003c\/p\u003e\n\u003cp\u003eHex mix VCA is a compact six channel VCA with an unique response curve range from logarythmic to exponential using a pot.\u003cbr\u003eOutput six, act as master and all other outs are normalized to it.\u003cbr\u003eInternal ribbon cable connector to normalize the Six channels directly to the HexMix system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mA +12V\u003c\/li\u003e\n\u003cli\u003e50 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e30 mm deep\u003c\/li\u003e\n\u003cli\u003e14HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937842454,"sku":null,"price":340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_5__60239.1571363736.1280.1280.jpg?v=1785019830"},{"product_id":"befaco-hexmix-hexpander-6ch-performance-mixer-expander","title":"BEFACO HEXMIX \u0026 HEXPANDER - 6CH performance mixer \u0026 expander","description":"\u003cp\u003e\u003cspan\u003eincludes both BEFACO HEXMIX \u0026amp; HEXPANDER\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 6CH performance mixer \u0026amp; expander\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*Use them together for fun mixing experience for your euerorack system!!!*\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e6-channel performance mixer with EQs mutes and Pan\u003c\/p\u003e\n\u003cp\u003eHexmix System is a six channel performance mixer specially designed for Eurorack.\u003c\/p\u003e\n\u003cp\u003eThe system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.\u003c\/p\u003e\n\u003cp\u003eThe mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.\u003c\/p\u003e\n\u003cp\u003eThe unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a convetional tabletop mixing deck.\u003c\/p\u003e\n\u003cp\u003eHEXMIX FEATURES\u003cbr\u003eThis is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.\u003c\/p\u003e\n\u003cp\u003eInputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.\u003c\/p\u003e\n\u003cp\u003eThe signal passes through various process before being sent to the master section. All of this process are located and controlled at each Channel Strip.\u003cbr\u003eThe Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.\u003c\/p\u003e\n\u003cp\u003eMaster section has it’s own EQ and volume control for the mix of all channels. Master EQ is software than individual channel’s and it’s meant to provide control over the final mix.\u003cbr\u003eIt’s possible to change output level from line to synth wit ha switch located in the back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e106 mA +12V\u003c\/li\u003e\n\u003cli\u003e88 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e-----------------------------------\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHexmix expander with 3 aux sends, PFL, individual outs per channel and master balanced out\u003c\/p\u003e\n\u003cp\u003eHexpander adds great functionality to Hexmix module. Featuring Three aux send with auxiliary returns, individual outputs for each channel, complete PFL system and balanced output.\u003cbr\u003eHexpander is designed to be placed on top of Hexmix. Expanding eurorack concept to 6u, allow every channel to be aligned as in traditional tabletop mixers.\u003c\/p\u003e\n\u003cp\u003eFor every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.\u003c\/p\u003e\n\u003cp\u003eEvery auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal pre or post fader\/EQ in parallel.\u003cbr\u003eReturns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set properly, for example, either to a guitar pedal or a FX module at synth level.\u003c\/p\u003e\n\u003cp\u003eHexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.\u003cbr\u003eFlip PFL switch to send that channel to the headphones out. With PFL\/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.\u003cbr\u003eLevel meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.\u003c\/p\u003e\n\u003cp\u003eEvery channel has individual 6,5\" jacks out at line level.Here you heve the signal of every channel post EQ.\u003cbr\u003eAs an addition, you have master balanced output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e137 mA +12V\u003c\/li\u003e\n\u003cli\u003e64 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569943478550,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_10__66156.1572636726.1280.1280.jpg?v=1784686265"},{"product_id":"intellijel-quad-vca","title":"Intellijel Quad VCA Pre-Order","description":"\u003cp\u003eWhen you get into eurorack, you'll inevitably come across the old adage—\u003cem\u003eyou can never have enough VCAs\u003c\/em\u003e. It's true, but it's a bit over simplified, the Quad VCA is not. Each of the four VCAs has independent level control, bipolar CV inputs with attenuators and led indicators, adjustable linear\/exponential response and and a +6dB boost switch to double the channels output. Each channel's CV inputs are cascaded to the next, as are its outputs so that you can create submixes.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eVoltage Controlled Quadrifier\u003c\/h2\u003e\n\u003cp\u003eThe Quad VCA comprises four channels of voltage controlled amplifiers. Each channel is equipped with a 6db boost, a LEVEL control, and the CV input response can be swept between linear and exponential. Additionally, the outputs of these channels are cascaded from left to right, allowing Quad VCA to function as a four channel mixer.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManual LEVEL control per VCA which is convenient when using the module as a mixer or for biasing when CV modulating the VCA with a bipolar LFO.\u003c\/li\u003e\n\u003cli\u003eDedicated CV attenuators with dual color LEDs for monitoring bipolar CV signals.\u003c\/li\u003e\n\u003cli\u003eContinuously adjustable response from linear to exponential per VCA.\u003c\/li\u003e\n\u003cli\u003eEach CV input is normalled to the adjacent one for cascaded control.\u003c\/li\u003e\n\u003cli\u003eEach output is normalled to the mix input of the adjacent one which allows you to use adjacent sets as submixes or the fourth output can be used as a master mix output when none of the other outputs are patched.\u003c\/li\u003e\n\u003cli\u003eEach VCA has a boost switch that increases the output level by approximately 6dB (double).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs + Downloads\u003c\/h2\u003e\n\u003cdiv class=\"intellijel-meta columns\"\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-width\"\u003e\n\u003cth colspan=\"2\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e12HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-depth\"\u003e\n\u003cth colspan=\"2\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e29mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-power\"\u003e\n\u003cth colspan=\"2\"\u003ePower\u003c\/th\u003e\n\u003ctd\u003e 65mA @ -12V\u003cbr\u003e65mA @ 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-manual\"\u003e\n\u003cth colspan=\"2\"\u003eManual\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/manuals\/quad-vca_manual_2018.09.13.pdf\"\u003eManual\u003c\/a\u003e (2018.09.13)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-firmware\"\u003e\n\u003cth colspan=\"2\"\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003e\u003cspan\u003eNo Firmware\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-modulargrid\"\u003e\n\u003cth colspan=\"2\"\u003eModularGrid\u003c\/th\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.modulargrid.net\/e\/intellijel-quad-vca\" target=\"_blank\"\u003eModularGrid\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/EAt0paqgOCA\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":51569950818582,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/White_Base_3_4__53952.1585783565.1280.1280.jpg?v=1785048620"},{"product_id":"make-noise-x-pan-5-channel-voltage-controlled-stereo-mixer","title":"Make Noise  X-PAN  5 channel Voltage Controlled Stereo Mixer","description":"\u003cp\u003eThe X-PAN music synthesizer module is a compact and powerful 5 channel Voltage Controlled Stereo Mixer with Low Noise and High Headroom allowing for creation of complex panoramic audio imagery in just 10hp.\u003c\/p\u003e\n\u003cp\u003eX-PAN is highly responsive to control signals allowing for exploration of the fluctuating stereo sidebands possible with Audio Rate Crossfading and Panning. X-PAN is Direct coupled for use as a CV Processing and Routing toolbox.\u003c\/p\u003e\n\u003cp\u003eX-PAN consists of two full featured Channels and one simpler Channel. The top two Channels each have voltage controlled cross-fading and panning while the third Channel is a stereo aux input with stereo VCA. All three Channels are combined together at the stereo SUM outputs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003efeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5 signal inputs all routed to a dynamic stereo output\u003c\/li\u003e\n\u003cli\u003eContains 10 High Quality VCA circuits in just 10hp\u003c\/li\u003e\n\u003cli\u003eFully Voltage Controlled Panning, Cross-fading and Mixing\u003c\/li\u003e\n\u003cli\u003eEasy to maintain signal integrity with high headroom, low noise circuitry\u003c\/li\u003e\n\u003cli\u003eAudio Rate crossfading and panning, fluctuating stereo sidebands\u003c\/li\u003e\n\u003cli\u003eAux Stereo Inputs controlled by Stereo VCA with Combo Pot\u003c\/li\u003e\n\u003cli\u003ePart of a decentralized mix console integrated throughout the system along with Optomix, modDemix, Dynamix, and RxMx\u003c\/li\u003e\n\u003cli\u003eDirect Coupled for use as Complex CV router\u003c\/li\u003e\n\u003cli\u003ePairs well with QPAS and Morphagene\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003especifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 10hp\u003c\/li\u003e\n\u003cli\u003eMax Depth: 30mm\u003c\/li\u003e\n\u003cli\u003ePower:\u003cbr\u003e145mA @ +12V\u003cbr\u003e110mA @ -12V\u003c\/li\u003e\n\u003cli\u003emanual:\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/makenoisemusic.com\/manuals\/x-pan-manual.pdf\" target=\"_blank\"\u003ex-pan-manual.pdf\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51569953898774,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/White_Base_3_59_copy_5__95597.1595358724.1280.1280.jpg?v=1784851769"},{"product_id":"maneco-labs-h-r-mixer-eurorack","title":"Maneco Labs H.R. MIxer (eurorack)","description":"\u003cp\u003eSimple 4 Channel MONO Mixer with Output\/Ctrl-Out\/Headphone Out\u003c\/p\u003e\n\u003cp\u003e6HP\u003cbr\u003e32mm deep\u003c\/p\u003e","brand":"Maneco Labs","offers":[{"title":"Default Title","offer_id":51569992892694,"sku":null,"price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/hr_mixer__84231.1640898602.1280.1280.jpg?v=1785021504"},{"product_id":"moddict-um5-5set-unity-mixer","title":"moddict UM5 [5set Unity Mixer]","description":"\u003cp class=\"p1\"\u003eUM5 is a 5set Unity Mixer in 2input x4, 3input x1 configuration, all in a 4HP!\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIt has 5 mix outs, with the outputs normalized in order.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSince it is a CV coupling, it’s compatible with both CV and audio.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAdd modulator or controller CVs onto the CVs, or combine audio into one.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e11-input mono mixer or 6input + 5input stereo mixer, etc.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIt's very flexible and useful thing to have!!\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eYellow silk is applied throughout the panels to add color to your modular setup. The silk part is less reflective and the silver part is reflective of the base aluminum panel. You can enjoy the unique texture.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWidth:4HP\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDepth:20mm\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIncludes: power cable, 2x M3 screws\u003c\/p\u003e","brand":"Moddict","offers":[{"title":"Default Title","offer_id":51569999642902,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/um5.jpg?v=1785054887"},{"product_id":"buchla-tiptop-audio-dual-voltage-processor-model-257t","title":"Buchla \u0026 Tiptop Audio Dual Voltage Processor Model 257t","description":"\u003cp class=\"p1\"\u003eDUAL VOLTAGE PROCESSOR - MODEL 257 t\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eModel 257 Dual Control Voltage Processor consists of two identical sections, each of which permits several applied control voltages to define a single output voltage according to the equation:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e(Va * K) + ((Vb * (1-M)) + (Vc * M)) + Voffset = V_out\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe algebraic manipulations possible with this module include addition, subtraction, scaling, inversion, and multiplication. Also incorporated is the capability of using one control voltage (M) to transfer control from one applied voltage (V_b) to another (V_c).\u003c\/p\u003e\n\u003cp\u003eFunctions\u003c\/p\u003e\n\u003cp\u003e- Attenuverter\u003c\/p\u003e\n\u003cp\u003eVa is the voltage input a for attenuverter (left jack on the panel)\u003c\/p\u003e\n\u003cp\u003eK knob can scale the incoming Va voltage either positively or negatively\u003c\/p\u003e\n\u003cp\u003e- Crossfader\u003c\/p\u003e\n\u003cp\u003eVb is the voltage input b for the left side of the crossfader (second jack from the left)\u003c\/p\u003e\n\u003cp\u003e+.5 switch adds 5 volts to the input of Vb\u003c\/p\u003e\n\u003cp\u003eVc is the voltage input c for the right side of the crossfader (fourth jack from the left)\u003c\/p\u003e\n\u003cp\u003eM scales Vb from 1 to 0 based on the position of M knob\u003c\/p\u003e\n\u003cp\u003eM scales Vc from 0 to 1 based on the position of M knob\u003c\/p\u003e\n\u003cp\u003eThe middle CV input at M\/M can crossfade between Vb and Vc (third jack from the left)\u003c\/p\u003e\n\u003cp\u003eThe M knob and M CV added together to control crossfade position\u003c\/p\u003e\n\u003cp\u003e- Offset\u003c\/p\u003e\n\u003cp\u003eVoffset Adds 0 - 10 volts to any combination of Va + Vb + Vc\u003c\/p\u003e\n\u003cp\u003e- Output\u003c\/p\u003e\n\u003cp\u003eVout is the combined voltage of the attenuverter, crossfader and offset (right jack on the panel)\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003eSize: 14HP - Depth: 25mm Power: +12V 45mA \/ -12V 22mA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eManual:\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/tiptopaudio.com\/manuals\/Buchla_\u0026amp;_Tiptop_Audio_257t.pdf\" rel=\"noopener\" target=\"_blank\"\u003edownload\u003c\/a\u003e\u003c\/p\u003e","brand":"Buchla \u0026 Tiptop Audio","offers":[{"title":"Default Title","offer_id":51570003771670,"sku":null,"price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/257t__65692.1664908932.1280.1280.jpg?v=1784675991"},{"product_id":"buchla-tiptop-audio-quad-lopass-gate-model-292t","title":"Buchla \u0026 Tiptop Audio Quad Lopass Gate Model 292t","description":"\u003cp\u003eQUAD LOPASS GATE - MODEL 292t\u003c\/p\u003e\n\u003cp\u003eSize: 16 HP - Depth: 45mm Power: +12V 87mA \/ -12V 36mA\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOUTPUTS All - Can use this output as a 4 to 1 (mono) audio mixer\u003c\/p\u003e\n\u003cp\u003eA,B,C,D - Individual audio outputs. Can be used as a quadraphonic distribution mixer\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCV INPUTS A,B,C,D - Control Voltage inputs for each audio channel\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBLUE KNOBS These are manual volume\/osets for each channel\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBLUE SWITCHES These select among 3 dierent modes:\u003c\/p\u003e\n\u003cp\u003eGate - A linear VCA (LED lit)\u003c\/p\u003e\n\u003cp\u003eCombo - A combination of the linear gate and the lopass filter mode. It adds a subtle ringing decay to the audio (No LED, both LEDs not lit)\u003c\/p\u003e\n\u003cp\u003eLoPass - A LoPass filter. Gives that “snap” when pinging it. (LED lit)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eINPUTS A,B,C,D - Individual audio inputs\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e* Note: Explore using the the 257t to attenuate the an envelope going into the 292t for a wider variety of timbres and responses\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"screenshot-2023-04-26-at-10.29.21-am.jpg\" class=\"__mce_add_custom__\" height=\"1468\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/screenshot-2023-04-26-at-10.29.21-am.jpg?v=1784247037\" title=\"screenshot-2023-04-26-at-10.29.21-am.jpg\" width=\"1266\"\u003e\u003c\/p\u003e","brand":"Buchla \u0026 Tiptop Audio","offers":[{"title":"Default Title","offer_id":51570009800982,"sku":null,"price":413.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/292t__06245.1682530617.1280.1280.jpg?v=1784247057"},{"product_id":"moddict-m3n-3in-mixer-white-noise-osc","title":"moddict M3n [3in Mixer + White Noise OSC]","description":"\u003cp class=\"p1\"\u003eM3n [3in Mixer + White Noise OSC]\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe M3n is a mixer with 3-in and a white noise generator.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eYou can use the familiar oscillator mixer section of your existing synths with Eurorack.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe mixer section has a straightforward sound quality, and the white noise is tuned to be mixed with the oscillator and is loud enough to be heard.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFour knobs allow you to adjust the volume of the 3-in and white noise.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe layout is designed to be easy to operate even in the 4HP space.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe DC coupling allows you to mix CVs as well.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eOf course, white noise can be mixed to CV as well.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #ff00ff;\"\u003e\u003cstrong\u003eThe panel is made of aluminum substrate and is reversible between silver and black.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe product comes with a 1-year warranty against spontaneous failures.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWidth: 4HP\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDepth: 20mm\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCurrent consumption: 19mA (+12V) 19mA (-12V) 0mA (5V)\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIncluded: power cable, 2x M3 screws\u003c\/p\u003e","brand":"Moddict","offers":[{"title":"Default Title","offer_id":51570010226966,"sku":null,"price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/M3n__46741.1683350353.1280.1280.jpg?v=1784247102"},{"product_id":"buchla-tiptop-audio-mixer-preamplifier-207t","title":"Buchla \u0026 Tiptop Audio Mixer\/Preamplifier 207t","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThe Buchla 207t mixer has six inputs and two main outputs as well as a monitor output.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAt the bottom right side of the mixer is a microphone input with preamplifier and gain pot. The microphone input jack takes a 1\/4” TRS phone plug. Above it is the gain switch and knob which set the gain of the preamp. The switch has two dierent ranges, 55db and 70db to cover most microphones that needs to be boosted to eurorack signal levels. The microphone input can also be used for a signal from some other source such as an electric guitar or line level electric piano.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eOn the top right of the mixer, is one \"left” channel output jack, and one \"right” channel output jack, two mono MONITOR outputs, and one stereo EXPANSION IN jacks. These last two jacks are actually a pair of inputs without attenuators, assign control, or access to the MONITOR output. The jack on the left goes directly to the \"left\" output and the left right goes to the \"right\" output. These inputs can be used to link the two mixers to form one 12 in, 2 out\" mixer. To do this simply patch the SIGNAL outputs of one mixer into the EXPANSION IN inputs of the other.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eHorizontally on the bottom are the six mixer signal input jacks ('A\" through \"F\").\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAbove these are six yellow MONITOR switches. Putting any of these switches in the up position sends the signal from that input to the MONITOR output on the mixer. The six blue switches, when up, send the respective signal to the main SIGNAL outputs. The sliders are attenuators on the input signals going to the SIGNAL outputs. They have no eect on any signal going to the MONITOR output.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eAbove the four centre sliders are ASSIGNMENT pots which pan the signal between the \"left\" and \"right\" outputs. The input channels on either side of each mixer (\"A\" and \"F\") feature voltage controlled assign. Without any control voltage channel \"A\" is assigned to the left output and channel \"F\" goes to the right output. As a control voltage increases the signal pans to the other output channel. The two LED's below each control voltage input indicate which channel the signal is going to.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eSize: 28 HP\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eDepth: 28mm\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003ePower: +12V 90mA \/ -12V 85mA\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/tiptopaudio.com\/manuals\/Buchla_\u0026amp;_Tiptop_Audio_207t.pdf?utm_source=newsletter\u0026amp;utm_medium=email\u0026amp;utm_campaign=Buchla++%26+Tiptop+Audio\u0026amp;sender_ctype=email\u0026amp;sender_campaign=aQ21LL\u0026amp;sender_customer=pgwRRn1\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"screenshot-2024-01-23-alle-205514.jpeg\" class=\"__mce_add_custom__\" height=\"1284\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/screenshot-2024-01-23-alle-205514.jpg?v=1784247157\" title=\"screenshot-2024-01-23-alle-205514.jpeg\" width=\"904\"\u003e\u003c\/p\u003e","brand":"Buchla \u0026 Tiptop Audio","offers":[{"title":"Default Title","offer_id":51570010849558,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/207t__93610.1684436843.1280.1280.jpg?v=1784247171"},{"product_id":"jolin-lab-knobi-macro-controller","title":"Jolin Lab KNOBI macro controller","description":"\u003cp\u003e\u003cspan\u003eKNOBI \u003c\/span\u003eis a multi-tool able to mix, attenuate, invert, display and multiply any kind of signal.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eKnobi\u003c\/em\u003e can serve a wide range of purposes – \u003cem\u003enot only to pass butter\u003c\/em\u003e - and this is true thanks to its internal signal path that makes use of some of the most useful building blocks of analog synthesis: a 4-channel mixer, a three-range offset, an attenuverter, a fixed manual gate and lastly a cascading multiple derived from the output stage of Agogô.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ea\u003c\/span\u003e, \u003cspan\u003eb\u003c\/span\u003e, \u003cspan\u003ec\u003c\/span\u003e and \u003cspan\u003ed\u003c\/span\u003e are \u003cem\u003eKnobi\u003c\/em\u003e’s inputs while \u003cspan\u003er \u003c\/span\u003eis a fixed 5v reference output. The toggle switch next to \u003cspan\u003ed\u003c\/span\u003e sets the range of the offset – the big knob below the meter. Connect a signal into one of the inputs to visualize its voltage value in the three digits meter. Keep in mind that this reading happens post offset and attenuverter – the smaller knob with (-) and (+) indications.\u003c\/p\u003e\n\u003cp\u003eThe pushbutton next to \u003cspan\u003ex4 \u003c\/span\u003eadds a gate of 5v to the mix: with no input connected it will act as a manual gate output. Autopatch the\u003cspan\u003e r\u003c\/span\u003e reference output into one of the inputs to use Knobi as a macro controller thanks the offset knob and switch to set the range and the attenuverter.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ex1\u003c\/span\u003e, \u003cspan\u003ex2\u003c\/span\u003e, \u003cspan\u003ex3\u003c\/span\u003e and\u003cspan\u003e x4\u003c\/span\u003e are all cascading copies of the final signal path. Plugging a cable will break the normalization and the multiplication will reset starting from the next output. Four cables plugged in will output a copy at the same factor x1 - unity gain – making Knobi a versatile buffered multiple.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003eThermal compensated 5v voltage source with dedicated output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFour channel mixer with four buffered output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuilt in 3 digits voltage meter post mix \/ attenuation \/ inversion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOffset with a dedicated three positions range toggle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eManual gate button tied to the mix.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 cascading outputs in an open design configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUnique signal path: mix – attenuate – invert – add – visualize – multiplicate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e“Whatever” power connector a.k.a. don’t mind the polarity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e• width 6HP\u003c\/p\u003e\n\u003cp\u003e• depth 25mm\u003c\/p\u003e\n\u003cp\u003e• 50mA +12V\u003c\/p\u003e\n\u003cp\u003e• 30mA -12V\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"sqs-block-button-element--medium sqs-button-element--primary sqs-block-button-element\" data-initialized=\"true\" href=\"https:\/\/jolin.tech\/s\/knobi_how_to.pdf\" target=\"_blank\"\u003eMANUAL\u003c\/a\u003e\u003c\/p\u003e","brand":"Jolin Lab","offers":[{"title":"Default Title","offer_id":51570011341078,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/knobi__99279.1688790028.1280.1280.jpg?v=1784247229"},{"product_id":"alm-busy-circuits-bxx2","title":"ALM Busy Circuits BXx2","description":"\u003cp\u003eThe BXx2 is a dual channel preamp, EQ and mixer based on the classic Boss BX series mixers. Well loved for their unique character and musicality, the sound of the BX is found throughout countless techno records from the 80s \u0026amp; 90s.\u003c\/p\u003e\n\u003cp\u003eWith the inclusion of both input gain and level controls, each channel can be overdriven, producing the signature saturated and lively sound the BX mixers are known for. The EQ controls provide the channels with simple but great sounding high and low shelf EQs for emphasising and shaping sounds as well as the tonality of the drive. An additional Aux input allows another mixer or extra sound source to be chained in.\u003c\/p\u003e\n\u003cp\u003eThe BXx2 is a simple but powerful sound shaping tool, adding colour and warmth to anything patched through it. It was designed in collaboration with \u003ca data-id=\"https:\/\/feedback-modules.myshopify.com\/\" data-type=\"URL\" href=\"https:\/\/feedback-modules.myshopify.com\/\"\u003eFeedback Modules\u003c\/a\u003e – based on their single channel \u003ca data-id=\"https:\/\/feedback-modules.myshopify.com\/collections\/modules\/products\/pre-bx\" data-type=\"URL\" href=\"https:\/\/feedback-modules.myshopify.com\/collections\/modules\/products\/pre-bx\"\u003ePRE BX\u003c\/a\u003e module and has a limited release of only 300 units.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"title\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"copy\"\u003e\n\u003cul\u003e\n\u003cli\u003eDual mixer channels with additional auxiliary mix input.\u003c\/li\u003e\n\u003cli\u003eOverdriving preamps with separate gain and level controls.\u003c\/li\u003e\n\u003cli\u003ePer channel high \u0026amp; low shelf EQ.\u003c\/li\u003e\n\u003cli\u003eSkiff friendly with reverse power protection.\u003c\/li\u003e\n\u003cli\u003eMade in England.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"title\"\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"copy\"\u003e\n\u003cp\u003e\u003cspan\u003eSupply:\u003c\/span\u003e +12V 10mA \/ -12V 10mA\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSize:\u003c\/span\u003e 8HP\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepth:\u003c\/span\u003e 32mm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ALM Busy Circuits","offers":[{"title":"Default Title","offer_id":51570012225814,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Bxx2__79818.1693276234.1280.1280.jpg?v=1784247296"},{"product_id":"boredbrain-xcelon-xp3","title":"Boredbrain xcelon xp3","description":"\u003cp\u003e\u003cspan\u003e3-CHANNEL STEREO MIX EXPANDER\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"features\"\u003e\n\u003cli\u003eAdds three stereo\/dual-mono channels to Xcelon mixer (up to two supported)\u003c\/li\u003e\n\u003cli\u003eTwo stereo FX sends and two stereo output mix busses selectable per-channel\u003c\/li\u003e\n\u003cli\u003eVariable input gain for both modular and line-level sources\u003c\/li\u003e\n\u003cli\u003eLong-travel volume faders with CV responsive LED indicators\u003c\/li\u003e\n\u003cli\u003eBalance controls with pan law curve and dual-mono crossfade mode\u003c\/li\u003e\n\u003cli\u003eClickless mutes and VU meters on all channels\u003c\/li\u003e\n\u003cli\u003eTwelve discrete control voltage inputs\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers for pre\/post-fader FX and meters, plus volume VCA mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"wp-block-heading has-nv-light-bg-color has-text-color\"\u003e\u003cstrong\u003eModular mixing expanded\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"has-nv-light-bg-color has-text-color has-medium-font-size\"\u003eXcelon XP3 is a three-channel stereo expander for the Xcelon eurorack mixer. The module’s channels are identical to those found on the main mixer. Up to two XP3 can connect to Xcelon, expanding the total number of mixer channels to either nine or twelve.\u003c\/p\u003e\n\u003ch3 class=\"wp-block-heading\"\u003eChannel Expansion\u003c\/h3\u003e\n\u003cp\u003eThe 22HP module has the same channel inputs, channel controls, direct outputs and rear jumpers as \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/xcelon\"\u003eXcelon\u003c\/a\u003e. The primary difference is that the expander lacks the mix outputs and FX i\/o section. This is because XP3 shares the two main mix busses and two FX sends busses with the main mixer.\u003c\/p\u003e\n\u003cp\u003eXP3 is connected to the main Xcelon mixer using the supplied 16-pin ribbon cable, from the port labeled \u003cstrong\u003eMIXER\u003c\/strong\u003e to one of the two expansion ports labeled \u003cstrong\u003eEXPANDER 1\u003c\/strong\u003e or \u003cstrong\u003eEXPANDER 2\u003c\/strong\u003e. These expansion ports are found on the backs of both modules. Because the mixer supports up to two XP3, a set of channel labels with 10, 11, and 12 are included to update the front panel.\u003c\/p\u003e\n\u003cp\u003eIt may be possible to connect more than two channel expanders using a flying bus cable, but low noise performance cannot be guaranteed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: The expander ports should \u003cstrong\u003eNOT\u003c\/strong\u003e be connected to a eurorack power bus or damage to the module(s) can occur.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Input\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eEach of the three channels has a pair of audio input jacks\u003cstrong\u003e (INPUT 7\u003c\/strong\u003e, \u003cstrong\u003eINPUT 8\u003c\/strong\u003e, etc.) for left and right stereo signals. The jacks are normalled such that a single mono source in the left jack is simply copied to the right. Alternatively, two discrete mono sources can also share a channel (see \u003cstrong\u003eXFADE\u003c\/strong\u003e). These AC-coupled coupled inputs accept typical eurorack-level audio signals, as well as line-level audio signals when boosted using the channel’s \u003cstrong\u003eGAIN\u003c\/strong\u003e control.\u003c\/p\u003e\n\u003cp\u003eThe four jacks directly below each pair of audio inputs are CV inputs, which allow for voltage control of the channel parameters. \u003cstrong\u003eVOL\u003c\/strong\u003e affects the volume within a range of 0 to +5V. By default, this control voltage input is biased by the fader position (summed), but in VCA mode it is attenuated by the fader (see Jumper Settings). \u003cstrong\u003eBAL\u003c\/strong\u003e affects the channel balance within a range of -5V to 5V (even with \u003cstrong\u003eXFADE\u003c\/strong\u003e enabled), while \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e affect their respective send levels within a range of 0 to +5V. These latter three control voltage inputs are all biased by their knob positions.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Control\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGAIN\u003c\/strong\u003e parameter is used to boost the channel’s input signal(s) up to +15 dB if necessary. Most eurorack audio sources may only need a small amount of gain, whereas line-level signals may require turning the knob up to the \u003cstrong\u003eLINE\u003c\/strong\u003e position. The red \u003cstrong\u003ePK\u003c\/strong\u003e (peak) indicator will illuminate just before either input signal becomes audibly distorted. For a clean mix, best practice is to set the \u003cstrong\u003eGAIN\u003c\/strong\u003e such that only loud transients trigger the \u003cstrong\u003ePK\u003c\/strong\u003e LED.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAL\u003c\/strong\u003e parameter adjusts the balance of the channel’s two input signals, and behaves much like a pan control, especially with a mono input signal. Control of the parameter is not linear, but instead implements a curve according to the -4.5 dB pan law. This yields a more natural sounding stereo panning.\u003c\/p\u003e\n\u003cp\u003eWhen the blue \u003cstrong\u003eXFADE\u003c\/strong\u003e button is engaged, the channel is configured in dual-mono mode. Both channel input signals are positioned to stereo center, and the \u003cstrong\u003eBAL\u003c\/strong\u003e parameter acts as a mono crossfader balancing the two signal levels. Signals that do not need stereo panning can then be doubled-up on a single channel, such as kick and snare drum, two different bass sounds, etc.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eVOL\u003c\/strong\u003e parameter adjusts the channel volume, and is also commonly referred to as the channel fader. Its 45mm vertical slider has a linear volume response for smooth fade ins and outs, with an entirely usable range. The brightness of the white LED indicates the volume position, and is of course responsive to incoming CV.\u003c\/p\u003e\n\u003cp\u003eNext to the volume control is a 5-segment \u003cstrong\u003eVU METER\u003c\/strong\u003e to help visualize signal level and dynamics. The meter is affected by both left and right channel signals. And although it does behave according to a decibel scale, the meter is intentionally biased upward for better resolution when comparing relative channel levels. By default, the \u003cstrong\u003eVU METER\u003c\/strong\u003e is post-fader, meaning it is affected by volume adjustments, but can optionally be configured pre-fader (see Jumper Settings).\u003c\/p\u003e\n\u003cp\u003eThe red \u003cstrong\u003eMUTE\u003c\/strong\u003e button, when activated, will effectively silence the channel with up to -93 dB of normal signal attenuation. Its electronically latching circuit is completely VCA-based with a very fast on\/off slew, eliminating any clicks or pops when muting or unmuting the channel.\u003c\/p\u003e\n\u003cp\u003eThe channel’s two gray knobs, \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e, are independent stereo effects sends. Using these parameters, an adjustable amount of the channel signal can be sent to the two shared effects busses \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e, which are commonly used for time-based effects such as delay and reverb. By default, both \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e are post-fader sends, meaning the amount of sent signal is also affected by the channel’s volume position. However, \u003cstrong\u003eFX1\u003c\/strong\u003e can be configured pre-fader (see Jumper Settings) to achieve a more than 50% wet mix of effect versus dry signal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAB\u003c\/strong\u003e switch assigns the channel output to one or both main output mix busses. In the leftmost and rightmost positions, the channel is routed to only one of the two busses, either A or B. In the middle position however, the channel is routed to both simultaneously, allowing for parallel processing, AFL monitoring (after fade listen), and other creative uses.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eDirect Outputs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eJust like the main mixer, XP3 is also equipped with several direct output ports to access individual channel signals for multi-track recording. Its bank of three stereo channels has two direct output ports, \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST, \u003c\/strong\u003eto tap the channel signals either before or after the volume faders.\u003c\/p\u003e\n\u003cp\u003eThese groupings of six signals are connected using an 8-pin cable to the optional direct output modules, Xcelon TRS and Xcelon DB25 (TBA), for balanced line outputs. They can be mixed and matched in any order, and both the \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST\u003c\/strong\u003e direct outputs for a bank of channels can be used simultaneously. This leaves the door open for future expansion such as dedicated cue monitoring and additional effects sends.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eJumper Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach channel has three custom settings found on the back of the module, which are configured using one or more jumpers.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-columns is-layout-flex wp-container-core-columns-layout-2 wp-block-columns-is-layout-flex\"\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVU METER\u003c\/th\u003e\n\u003cth\u003e1 jumper\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eMeter is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeter is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003ePRE is very common on DJ mixers, and is useful for adjusting the gain and visually identifying a signal before bringing it into the mix.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eFX SND1\u003c\/th\u003e\n\u003cth\u003e2 jumpers\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eSent signal is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSent signal is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003ePRE is useful (and necessary) to get a very washed-out effect where the effects mix is more than 50% wet.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVOL CV\u003c\/th\u003e\n\u003cth\u003e3 jumpers (or 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003eMOD\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eCV modulates volume with fader bias\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003eVCA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCV replaces bias voltage and fader attenuates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003eVCA allows the volume circuit to be used as the final VCA in a patch, saving space and modules. Simply patch an envelope into the \u003cstrong\u003eVOL\u003c\/strong\u003e CV input, and use the fader to adjust the level.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch4 class=\"wp-block-heading\"\u003etechnical specs\u003c\/h4\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Inputs:\u003c\/strong\u003e 6 x 3.5 mm jacks (3 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Inputs:\u003c\/strong\u003e 12 x 3.5 mm jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 100 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Input Gain:\u003c\/strong\u003e +15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 22 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.5 in (38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 oz (312 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +12 V 190 mA (250 max), -12 V 150 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"wp-block-heading\"\u003emix tips\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eGAIN FOR PERFORMANCE\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e– A useful tip for performance is to set each GAIN such that your mix sounds correct with all the faders up or at the same position. Now returning to a “balanced” mix is as simple moving faders back to the same position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO VCA PATCH\u003c\/strong\u003e – Save space in a case for live performance or save VCAs for other purposes by using the VCA mode jumper setting for VOL CV. This allows a typical envelope to be fed into the CV input, and the overall volume can still be adjusted normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% WET FX\u003c\/strong\u003e – If mix bus B is unused or not monitored, any channel can have a fully wet FX mix (no dry signal), even with rear jumpers set to POST. Just assign the channel to mix B (essentially muting it), be sure the FX return is assigned to mix A, and turn up the FX send of the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXFADE MUTATION\u003c\/strong\u003e – The XFADE feature can be used to “mutate” a sound, crossfading between to similar sounds or waveforms. This is especially interesting when modulating with a rapidly changing CV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFX RETURNS MUTE\u003c\/strong\u003e – Although the FX returns do not have mute buttons, the AB switch can be used to quickly remove them from either the A or B mix, which is still very effective during a live mix.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"xcelon-channel-wireframe-v1.0.png\" class=\"__mce_add_custom__\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-channel-wireframe-v1.0.png?v=1784247487\" title=\"xcelon-channel-wireframe-v1.0.png\" width=\"277\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016452886,"sku":null,"price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon_xp3__64470.1701480861.1280.1280.jpg?v=1784247500"},{"product_id":"boredbrain-xcelon-xcelon-xp3-bundle","title":"Boredbrain xcelon \u0026 xcelon xp3 Bundle Pre-Order","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain xcelon \u0026amp; xcelon xp3 Bundle\u003c\/strong\u003e\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016518422,"sku":null,"price":1378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon_XP3_bundle__24197.1701481085.1280.1280.jpg?v=1784247498"},{"product_id":"boredbrain-xcelon","title":"Boredbrain xcelon Pre-Order","description":"\u003cp\u003eTRUE STEREO VOLTAGE-CONTROLLED MIXER\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-columns has-1-columns has-desktop-equal-layout has-tablet-equal-layout has-mobile-equal-layout has-vertical-unset has-default-gap\" id=\"wp-block-themeisle-blocks-advanced-columns-217aebea\"\u003e\n\u003cdiv class=\"innerblocks-wrap\"\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-column\" id=\"wp-block-themeisle-blocks-advanced-column-f0498e9e\"\u003e\n\u003ch2 class=\"wp-block-heading has-nv-light-bg-color has-text-color\"\u003e\u003cstrong\u003eA modular mixing powerhouse\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"has-nv-light-bg-color has-text-color has-medium-font-size\"\u003eXcelon is an all-analog six-channel stereo audio mixer for eurorack modular systems. With an interface designed for immediate hands-on control and visual feedback, plus extensive CV and expandability, the module is a powerful mixing tool for both performance and production.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-columns has-2-columns has-desktop-equal-layout has-tablet-equal-layout has-mobile-collapsedRows-layout has-vertical-top has-default-gap\" id=\"wp-block-themeisle-blocks-advanced-columns-cba8d97f\"\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-columns-overlay\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"innerblocks-wrap\"\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-column\" id=\"wp-block-themeisle-blocks-advanced-column-b1306ef4\"\u003e\n\u003cul class=\"features has-nv-light-bg-color has-text-color has-link-color wp-elements-10fa585b52ce8590dda0aaae20108526\"\u003e\n\u003cli\u003eSix stereo\/dual-mono channels with low-noise analog circuitry\u003c\/li\u003e\n\u003cli\u003eTwo stereo FX sends and two dedicated FX returns\u003c\/li\u003e\n\u003cli\u003eTwo stereo output mix busses selectable per-channel\u003c\/li\u003e\n\u003cli\u003eVariable input gain for both modular and line-level sources\u003c\/li\u003e\n\u003cli\u003eLong-travel volume faders with CV responsive LED indicators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-themeisle-blocks-advanced-column\" id=\"wp-block-themeisle-blocks-advanced-column-b6824fe0\"\u003e\n\u003cul class=\"features has-nv-light-bg-color has-text-color has-link-color wp-elements-3a5e7f165b6c05731e8ac1e594f077ac\"\u003e\n\u003cli\u003eBalance controls with pan law curve and dual-mono crossfade mode\u003c\/li\u003e\n\u003cli\u003eClickless mutes and VU meters on all channels\u003c\/li\u003e\n\u003cli\u003eTwenty-six discrete control voltage inputs\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers for pre\/post-fader FX and meters, plus volume VCA mode\u003c\/li\u003e\n\u003cli\u003eExpansion ports for channel expanders, direct outputs, and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 48 HP module consists of three main sections. On the left side are the channel inputs (both audio and CV), in the middle are the channel controls, and on the right are the mix outputs, plus FX i\/o and controls.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Input\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eEach of the six channels has a pair of audio input jacks\u003cstrong\u003e (INPUT 1\u003c\/strong\u003e, \u003cstrong\u003eINPUT 2\u003c\/strong\u003e, etc.) for left and right stereo signals. The jacks are normalled such that a single mono source in the left jack is simply copied to the right. Alternatively, two discrete mono sources can also share a channel (see \u003cstrong\u003eXFADE\u003c\/strong\u003e). These AC-coupled coupled inputs accept typical eurorack-level audio signals, as well as line-level audio signals when boosted using the channel’s \u003cstrong\u003eGAIN\u003c\/strong\u003e control.\u003c\/p\u003e\n\u003cp\u003eThe four jacks directly below each pair of audio inputs are CV inputs, which allow for voltage control of the channel parameters. \u003cstrong\u003eVOL\u003c\/strong\u003e affects the volume within a range of 0 to +5V. By default, this control voltage input is biased by the fader position (summed), but in VCA mode it is attenuated by the fader (see Jumper Settings). \u003cstrong\u003eBAL\u003c\/strong\u003e affects the channel balance within a range of -5V to 5V (even with \u003cstrong\u003eXFADE\u003c\/strong\u003e enabled), while \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e affect their respective send levels within a range of 0 to +5V. These latter three control voltage inputs are all biased by their knob positions.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Control\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGAIN\u003c\/strong\u003e parameter is used to boost the channel’s input signal(s) up to +15 dB if necessary. Most eurorack audio sources may only need a small amount of gain, whereas line-level signals may require turning the knob up to the \u003cstrong\u003eLINE\u003c\/strong\u003e position. The red \u003cstrong\u003ePK\u003c\/strong\u003e (peak) indicator will illuminate just before either input signal becomes audibly distorted. For a clean mix, best practice is to set the \u003cstrong\u003eGAIN\u003c\/strong\u003e such that only loud transients trigger the \u003cstrong\u003ePK\u003c\/strong\u003e LED.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAL\u003c\/strong\u003e parameter adjusts the balance of the channel’s two input signals, and behaves much like a pan control, especially with a mono input signal. Control of the parameter is not linear, but instead implements a curve according to the -4.5 dB pan law. This yields a more natural sounding stereo panning.\u003c\/p\u003e\n\u003cp\u003eWhen the blue \u003cstrong\u003eXFADE\u003c\/strong\u003e button is engaged, the channel is configured in dual-mono mode. Both channel input signals are positioned to stereo center, and the \u003cstrong\u003eBAL\u003c\/strong\u003e parameter acts as a mono crossfader balancing the two signal levels. Signals that do not need stereo panning can then be doubled-up on a single channel, such as kick and snare drum, two different bass sounds, etc.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eVOL\u003c\/strong\u003e parameter adjusts the channel volume, and is also commonly referred to as the channel fader. Its 45mm vertical slider has a linear volume response for smooth fade ins and outs, with an entirely usable range. The brightness of the white LED indicates the volume position, and is of course responsive to incoming CV.\u003c\/p\u003e\n\u003cp\u003eNext to the volume control is a 5-segment \u003cstrong\u003eVU METER\u003c\/strong\u003e to help visualize signal level and dynamics. The meter is affected by both left and right channel signals. And although it does behave according to a decibel scale, the meter is intentionally biased upward for better resolution when comparing relative channel levels. By default, the \u003cstrong\u003eVU METER\u003c\/strong\u003e is post-fader, meaning it is affected by volume adjustments, but can optionally be configured pre-fader (see Jumper Settings).\u003c\/p\u003e\n\u003cp\u003eThe red \u003cstrong\u003eMUTE\u003c\/strong\u003e button, when activated, will effectively silence the channel with up to -93 dB of normal signal attenuation. Its electronically latching circuit is completely VCA-based with a very fast on\/off slew, eliminating any clicks or pops when muting or unmuting the channel.\u003c\/p\u003e\n\u003cp\u003eThe channel’s two gray knobs, \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e, are independent stereo effects sends. Using these parameters, an adjustable amount of the channel signal can be sent to the two shared effects busses \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e, which are commonly used for time-based effects such as delay and reverb. By default, both \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e are post-fader sends, meaning the amount of sent signal is also affected by the channel’s volume position. However, \u003cstrong\u003eFX1\u003c\/strong\u003e can be configured pre-fader (see Jumper Settings) to achieve a more than 50% wet mix of effect versus dry signal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAB\u003c\/strong\u003e switch assigns the channel output to one or both main output mix busses. In the leftmost and rightmost positions, the channel is routed to only one of the two busses, either A or B. In the middle position however, the channel is routed to both simultaneously, allowing for parallel processing, AFL monitoring (after fade listen), and other creative uses.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eMix Outputs \u0026amp; FX I\/O\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eXcelon’s two aforementioned output mix busses are available at the pairs of jacks \u003cstrong\u003eMIX OUT A\u003c\/strong\u003e and \u003cstrong\u003eMIX OUT B\u003c\/strong\u003e. These eurorack-level stereo outputs can be patched and processed separately before reaching an output module like \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/monitr\/\"\u003eMonitr\u003c\/a\u003e. Such processing modules may include stereo equalizers like \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/eqx5\/\"\u003eEQx5\u003c\/a\u003e, filters, compressors, limiters, crossfaders, etc.\u003c\/p\u003e\n\u003cp\u003eThe two pairs of output jacks \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e contain eurorack-level stereo submixes created with the effects sends controls of all channels. As previously mentioned, these are commonly patched into reverb and delay, but may also be used for other purposes like creating headphone mixes. If only the left output jack of \u003cstrong\u003eFX SND 1\u003c\/strong\u003e or \u003cstrong\u003eFX SND 2\u003c\/strong\u003e is used, any signals on the right side will be summed with the left so they are not lost.\u003c\/p\u003e\n\u003cp\u003eThe two pairs of input jacks \u003cstrong\u003eFX RTN 1\u003c\/strong\u003e and \u003cstrong\u003eFX RTN 2\u003c\/strong\u003e are dedicated stereo effects returns, where the output signals of effects can return to the mixer. Each return has its own manual level control, \u003cstrong\u003eRTN 1\u003c\/strong\u003e and \u003cstrong\u003eRTN 2\u003c\/strong\u003e, and CV input directly above. The CV inputs affect levels within a range of 0 to +5V and are biased by their knob positions. Additionally, the two returns share an \u003cstrong\u003eAB\u003c\/strong\u003e switch to assign them to either or both mix busses.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The effects returns can be used alternatively as extra stereo inputs.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eChannel Expansion\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eXcelon has two expansion ports to optionally add more channels to the system. These 16-pin ports are labeled \u003cstrong\u003eEXPANDER 1\u003c\/strong\u003e and \u003cstrong\u003eEXPANDER 2\u003c\/strong\u003e and can be found on the the back of the module. Expander modules connected to these ports, such as \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/xcelon-xp3\"\u003eXcelon XP3\u003c\/a\u003e, will have access to the two stereo mix busses and two stereo effects send busses. It may be possible to connect more than two channel expanders using a flying bus cable, but low noise performance cannot be guaranteed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: The expander ports should \u003cstrong\u003eNOT\u003c\/strong\u003e be connected to a eurorack power bus or damage to the module(s) can occur.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003cimg alt=\"xcelon-xp3.jpg\" class=\"__mce_add_custom__\" height=\"800\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-xp3.jpg?v=1784247486\" title=\"xcelon-xp3.jpg\" width=\"793\"\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eDirect Outputs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe module is also equipped with several direct output ports to access individual channel signals for multi-track recording. Each bank of three stereo channels has two direct output ports, \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST, \u003c\/strong\u003eto tap the channel signals either before or after the volume faders. An additional port provides direct access to the two stereo returns and mix A.\u003c\/p\u003e\n\u003cp\u003eThese groupings of six signals are connected using an 8-pin cable to the optional direct output modules, Xcelon TRS and Xcelon DB25 (TBA), for balanced line outputs. They can be mixed and matched in any order, and both the \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST\u003c\/strong\u003e direct outputs for a bank of channels can be used simultaneously. This leaves the door open for future expansion such as dedicated cue monitoring and additional effects sends.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eJumper Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach channel has three custom settings found on the back of the module, which are configured using one or more jumpers.\u003c\/p\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVU METER\u003c\/th\u003e\n\u003cth\u003e1 jumper\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eMeter is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeter is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003ePRE is very common on DJ mixers, and is useful for adjusting the gain and visually identifying a signal before bringing it into the mix.\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eFX SND1\u003c\/th\u003e\n\u003cth\u003e2 jumpers\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eSent signal is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSent signal is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cem\u003ePRE is useful (and necessary) to get a very washed-out effect where the effects mix is more than 50% wet.\u003c\/em\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVOL CV\u003c\/th\u003e\n\u003cth\u003e3 jumpers (or 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003eMOD\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eCV modulates volume with fader bias\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003eVCA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCV replaces bias voltage and fader attenuates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eVCA allows the volume circuit to be used as the final VCA in a patch, saving space and modules. Simply patch an envelope into the \u003cstrong\u003eVOL\u003c\/strong\u003e CV input, and use the fader to adjust the level.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4 class=\"wp-block-heading\"\u003etechnical specs\u003c\/h4\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Inputs:\u003c\/strong\u003e 16 x 3.5 mm jacks (8 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Outputs:\u003c\/strong\u003e 8 x 3.5 mm jacks (4 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Inputs:\u003c\/strong\u003e 26 x 3.5 mm jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 100 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Input Gain:\u003c\/strong\u003e +15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 48 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.5 in (38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24 oz (680 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +12 V 395 mA (470 max), -12 V 320 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"wp-block-heading\"\u003emix tips\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eGAIN FOR PERFORMANCE\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e– A useful tip for performance is to set each GAIN such that your mix sounds correct with all the faders up or at the same position. Now returning to a “balanced” mix is as simple moving faders back to the same position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO VCA PATCH\u003c\/strong\u003e – Save space in a case for live performance or save VCAs for other purposes by using the VCA mode jumper setting for VOL CV. This allows a typical envelope to be fed into the CV input, and the overall volume can still be adjusted normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% WET FX\u003c\/strong\u003e – If mix bus B is unused or not monitored, any channel can have a fully wet FX mix (no dry signal), even with rear jumpers set to POST. Just assign the channel to mix B (essentially muting it), be sure the FX return is assigned to mix A, and turn up the FX send of the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXFADE MUTATION\u003c\/strong\u003e – The XFADE feature can be used to “mutate” a sound, crossfading between to similar sounds or waveforms. This is especially interesting when modulating with a rapidly changing CV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFX RETURNS MUTE\u003c\/strong\u003e – Although the FX returns do not have mute buttons, the AB switch can be used to quickly remove them from either the A or B mix, which is still very effective during a live mix.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"xcelon-channel-wireframe-v1.0.png\" class=\"__mce_add_custom__\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-channel-wireframe-v1.0_c1e3410a-ec10-44f4-a0aa-a1c54448c792.png?v=1784247490\" title=\"xcelon-channel-wireframe-v1.0.png\" width=\"277\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016616726,"sku":null,"price":949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon__78437.1701480422.1280.1280.jpg?v=1784247499"},{"product_id":"befaco-divkid-output-bus","title":"Befaco\/Divkid OUTPUT BUS Pre-Order","description":"\u003cp\u003e\u003cspan\u003eThe Output Bus is your ultimate output module: Presented by DivKid and Befaco, meant to be the last link in your modular chain!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInspired by pro audio and studio summing units the Output Bus allows for summing style mixing, external gear integration, soft clip limiting, flexible output types, headphone monitoring and level visualization.\u003c\/p\u003e\n\u003cp\u003eThe module works great mixing all your other mixers in your setup, to return mono or stereo FX into the master bus and for bringing in external stereo line level gear with ease. All of this in just 8HP while also being able to visualize your final levels, output appropriate signals on the right cable type and monitor in headphones.\u003c\/p\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSix stereo inputs.\u003c\/li\u003e\n\u003cli\u003eLine\/synth selector in input six.\u003c\/li\u003e\n\u003cli\u003eModular level minijack out.\u003c\/li\u003e\n\u003cli\u003e6,5 mm Jack out.\u003c\/li\u003e\n\u003cli\u003eMinijack and 6,5 mm phones out.\u003c\/li\u003e\n\u003cli\u003eLed Vu-meter.\u003c\/li\u003e\n\u003cli\u003eSoft clipping circuit at main output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent needs: +12V: 70mA, -12V: 68mA\u003c\/li\u003e\n\u003cli\u003eWidth: 8 HP\u003c\/li\u003e\n\u003cli\u003eDepth Assembled Version: 30 mm\u003c\/li\u003e\n\u003cli\u003eDepth DIY Kit Version: 40 mm\u003c\/li\u003e\n\u003cli\u003e300mW Headphone amp (@200\u003cspan\u003eΩ impedance)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e+4dBu Line Out (Impedance Balanced).\u003c\/li\u003e\n\u003cli\u003eDesigned, kits prepared and assembled in Barcelona.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eRESOURCES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.befaco.org\/docs\/Output_Bus\/Output_Bus_User_Manual.pdf\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Divkid","offers":[{"title":"Default Title","offer_id":51570018943254,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/output_bus__04055.1710799405.1280.1280.jpg?v=1784247698"},{"product_id":"worng-electronics-sidecar","title":"WORNG Electronics SIDECAR Pre-Order","description":"\u003cp class=\"lead wrap\"\u003eErgonomic VCA with mixing\u003c\/p\u003e\n\u003cp\u003eSideCar from WORNG Electronics is a six channel mixing VCA (4x mono, 2x stereo) with 45mm faders and proprietary CV shaping circuitry to deliver high resolution level control, punchy envelope response, and improved headroom.\u003c\/p\u003e\n\u003cp\u003eSideCar is designed to give you a proper mixing experience, letting you craft proper detailed mixes from within your Eurorack system like never before. We designed SideCar with a 'less-is-more' approach to enable you to just get premium level control with a clean and usable interface without trying to cram the interface full of features, giving you a high quality, truely modular building block for your modular system.\u003c\/p\u003e\n\u003cp\u003eThe inputs and outputs cascade for use as a mixer or for ease of more complicated patching, SideCar is also the perfect accompaniment for a SoundStage or Jumble Henge to add level control to your favourite spectral mixer.\u003c\/p\u003e\n\u003cp\u003e18 HP\u003c\/p\u003e\n\u003cp\u003e25 mm deep\u003c\/p\u003e\n\u003cp\u003e72 mA +12V\u003c\/p\u003e\n\u003cp\u003e72 mA -12V\u003c\/p\u003e\n\u003cp\u003e0 mA 5V\u003c\/p\u003e","brand":"WORNG Electronics","offers":[{"title":"Default Title","offer_id":51570020942102,"sku":null,"price":389.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/sidecar__20301.1715896718.1280.1280.jpg?v=1784247825"},{"product_id":"make-noise-multimod","title":"Make Noise  MultiMod","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith MultiMod...from one control signal, we create many.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIn a modular synthesizer, it is easy to create complex results via complex means - patching an elaborate network of independent control signals, for example. This can be very powerful but also cumb\u003c\/span\u003e\u003cspan\u003eersome to set up, and potentially difficult to control in a meaningful way. MultiMod represents a new approach: it takes a single control signal and copies it 8 times, not unlike a simple mult, except that it allows you to modify those copies by weighted adjustment of their relative phase and speed. The result is modulation that is related to the source, but not identical at each destination. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePhase\u003c\/span\u003e\u003cspan\u003e sets the spacing of the signal copies in time, weighted by channel, with each progressive channel getting more out of phase from the original signal and from each other. \u003c\/span\u003e\u003cspan\u003eSpread\u003c\/span\u003e\u003cspan\u003e allows for varispeeding the copies by different amounts, with each getting progressively faster or slower than the original Signal. \u003c\/span\u003e\u003cspan\u003eTime\u003c\/span\u003e\u003cspan\u003e determines the range of time captured at the input and therefore also the depth of modulation across copies of the input signal when Phase and Spread are manipulated. MultiMod also includes \u003c\/span\u003e\u003cspan\u003eTempo\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eHold\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003eReset\u003c\/span\u003e\u003cspan\u003e features, and a variety of Read Shapes for temporal rearrangement of input signals. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen the input is not patched, MultiMod generates an LFO that is copied eight times and manipulated in the same ways. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMultiMod is built with our latest DSP hardware which offers eight high resolution outputs, with signal input and output ranges approaching the upper limits of the analog eurorack modular system. All I\/O is capable of a 20V range at +\/-10V, greatly exceeding the typical 0-5V CV input ranges on typical digital modules. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGenerate vari-speeded, phase modulated copies of any modulation signal.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDramatically control 8 CVs with just 3 fully modulatable parameters. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMultiple unique read shapes for varying traversal through copied signals\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTempo\/Reset inputs and Clock output for temporal system integration\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHold feature for looping captured signals\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUltra-Wide 20V p-p I\/O ranges approach analog maximums of the eurorack system\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFull TechniColor, Maximum Blinkenlights\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCalibrated to accurately pass critical control signals such as quantized pitch CV\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInternally generated signals for “LFO mode” when nothing is patched to the Signal Input.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWidth: 10hp\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMax depth (incl power cable): 39mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePower:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e195mA @+12V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e10mA @-12V \u003c\/span\u003e\u003c\/p\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51570026578198,"sku":null,"price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Multimod__31773.1738260289.1280.1280.jpg?v=1784248409"},{"product_id":"make-noise-jumbler","title":"Make Noise  Jumbler","description":"\u003cp class=\"has-small-font-size\"\u003eThe Jumbler music synthesizer module is a six by six channel analog signal combiner and distributor for the New Universal Synthesizer System or any Eurorack modular synthesizer. Jumble is one of the N.U.S.S. concepts where the routings of a patch could be re-configured, or jumbled, instantly via voltage control to produce variations on a theme.\u003c\/p\u003e\n\u003cp class=\"has-small-font-size\"\u003eJumbler gives you powerful two-parameter access to the rearrangement of both origins and destinations for up to six modular signals. One to six inputs are routed to one to six outputs, in an order determined by the Rotate control, and combination determined by the Radiate control. Unlike a simple switch module, Jumbler’s analog VCA-based design is specially geared for smooth transitions and hybrid signals.\u003c\/p\u003e\n\u003cp class=\"has-small-font-size\"\u003eJumbler is a great module for hybrid control voltage mashing, complex waveform mixing, on-the-fly effects re-routing, gate and clock re-combinations and more. Some folks have said it is like patching a stack of 6 RxMx circuits.\u003c\/p\u003e\n\u003cp class=\"has-small-font-size\"\u003e \u003c\/p\u003e\n\u003cul class=\"wp-block-list\"\u003e\n\u003cli\u003eMix and Match up to six signals for up to six destinations\u003c\/li\u003e\n\u003cli\u003eEasy to use as a voltage controlled mixer or continuously crossfading switch \u003c\/li\u003e\n\u003cli\u003eDynamically blend waveforms from a single or multiple oscillators \u003c\/li\u003e\n\u003cli\u003eCreate hybrid rhythms with gate or clock sources\u003c\/li\u003e\n\u003cli\u003eChange up effects routings on the fly \u003c\/li\u003e\n\u003cli\u003eCreate feedback and matrix-mixer patches \u003c\/li\u003e\n\u003cli\u003eAll analog design featuring 36 VCAs\u003c\/li\u003e\n\u003cli\u003eYou’ve done some patchin’… now it is time to try some jumblin’…\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"wp-block-list\"\u003e\n\u003cli\u003eWidth: 10hp\u003c\/li\u003e\n\u003cli\u003eMax Depth\u003cbr\u003e(incl. power cable): 43mm\u003c\/li\u003e\n\u003cli\u003ePower:\u003cbr\u003e178mA @+12V\u003cbr\u003e92mA @-12V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.makenoise-manuals.com\/jumbler\/jumbler-manual.html\" rel=\"noreferrer noopener\" target=\"_blank\"\u003e\u003cspan\u003eJumbler Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51570034999574,"sku":null,"price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/jumbler__23845.1745857426.1280.1280.jpg?v=1784248855"},{"product_id":"worng-electronics-soundstage-ii","title":"WORNG Electronics SoundStage II Pre-Order","description":"\u003cp class=\"body\"\u003eSoundStage II is a stereo mixer module unlike any other. Completely reimagining what a mixer needs to be in a Eurorack system, SoundStage helps you build your mix just by patching your voices in. \u003cbr\u003e\u003cbr\u003eInputs are placed in the stereo field depending on their horizontal patch position left to right, and placed in the frequency spectrum depending on vertical patch position, with twenty carefully tuned analogue resonant -12dB\/octave Sallen-Key filters to give definition to low, low mid, mid, high mid and high voices. \u003cbr\u003e\u003cbr\u003eDepth of filtering and output level have dedicated controls and bipolar CV inputs, allowing creative uses such as sidechain compression and rhythmic filtering. \u003cbr\u003e\u003cbr\u003eSoundStage II improves on the original with an improved Depth control circuit, added (fully filtered) FX send and return, better low end response, better power consumption, and a log VCA on the output for better response when patching compression or expansion on the outputs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"body\"\u003eWidth: 14hp\u003c\/li\u003e\n\u003cli class=\"body\"\u003eDepth: 40mm\u003c\/li\u003e\n\u003cli class=\"body\"\u003eCurrent draw:\u003cbr\u003e+12V: 130mA\u003cbr\u003e-12V: 130mA\u003cbr\u003e+5V: 0mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca class=\"button w-button\" href=\"https:\/\/cdn.prod.website-files.com\/5a1bddaccc80bd0001f015dd\/64de0e57df7d0876a9a58e26_SoundStage%20II%20manual%20v1.00.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"WORNG Electronics","offers":[{"title":"Default Title","offer_id":51570036506902,"sku":null,"price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Soundstage_2__74778.1752964013.1280.1280.jpg?v=1784249006"},{"product_id":"worng-electronics-vector-space","title":"WORNG Electronics Vector Space","description":"\u003cp class=\"body\"\u003eVector Space builds on the concept of spatial CV mixing pioneered by the Wiard JAG and moves into three dimensions, as well as adding additional complex outputs, letting you generate seventeen interrelated voltages from three CV inputs, using 100% analogue circuitry. \u003cbr\u003e\u003cbr\u003eUse it to generate a large number of complex modulations from a small number of simple sources, and vastly increase the amount of modulation you have in your system. Try running three sequencers or stepped voltages to the inputs and then running the plane outputs to a number of VCO frequency inputs for complex countermelodies, run LFOs or random voltages in to get complex modulation voltages out, it works particularly well feeding the outputs back to modulate the speed\/shape\/etc of what's being fed in, things can get very complex very quickly. The switches shift the expected input range from +\/-5V to 0\/10V to use with either bipolar or unipolar sources, or use the switches as another input source by switching them in real time.\u003cbr\u003e‍\u003cbr\u003e‍\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"body\"\u003eWidth: 20hp\u003c\/li\u003e\n\u003cli class=\"body\"\u003eDepth: 25mm\u003c\/li\u003e\n\u003cli class=\"body\"\u003eCurrent Draw:\u003cbr\u003e+12V: 150mA\u003cbr\u003e-12V: 120mA\u003cbr\u003e+5V: 0mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca class=\"button w-button\" href=\"https:\/\/cdn.prod.website-files.com\/5a1bddaccc80bd0001f015dd\/5aa0c4e2b7b26c00013f7ec1_Vector%20Space%20Manual%20v1.00.pdf\" target=\"_blank\"\u003eDownload Manual\u003c\/a\u003e\u003c\/p\u003e","brand":"WORNG Electronics","offers":[{"title":"Default Title","offer_id":51570036539670,"sku":null,"price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/VectorSpace__35726.1752964555.1280.1280.jpg?v=1784249012"},{"product_id":"make-noise-qxg","title":"Make Noise  QXG","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eNEXT BATCH April\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Quad Stereo Gate (QXG) music synthesizer module is a Four Channel Stereo Low Pass Gate and Mixer. Like the DXG before it, the QXG utilizes a new low pass gate circuit that does not use vactrols. This circuit is 100% analog and its response was arrived at after many months tailoring it to meet or exceed the expectations that have been set by all the vactrol low pass gates that Make Noise has created over the years. Additionally the QXG adds a Vactrol button to select between a Slow, low-pass-gate-like response emulating the decay time of a vactrol (Vactrol button ON), and a Fast precision response that still maintains the gentle filtering characteristic (Vactrol button OFF). Fast response can be especially useful when patching QXG with complex and quickly-changing functions such as those generated by PoliMATHS with the OSC circuit in use. The QXG also includes a Stereo Sum Output with voltage controllable Stereo Spread to quickly route all four channels across the stereo field. Each channel also has an individual output that removes the channel from the Sum when patched. In addition, QXG includes signal and control input headers for creating pre-patched connections from the outputs of PoliMATHS and MultiMod. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePart of the New Universal Synthesizer System\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFour channel low pass gate\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVactrol-free design for classic Low Pass Gate sounds\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVactrol button to select Fast or Slow response\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eXpread parameter for spreading the four channels across the stereo field\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSumming stage with Stereo AUXiliary IN allows for chaining of multiple units, creating larger mixes\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIndividual channels can be removed from Sum by patching to their respective outputs\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDesigned to work with MultiMod and PoliMaths\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eChain two QXG units to a PoliMaths for immediate eight-channel amplitude control\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWidth: 12hp\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMax Depth (incl. power cable): 43 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePower:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e65 mA@ +12V \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e75 mA @ -12V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.makenoise-manuals.com\/qxg\/qxg-manual.pdf\"\u003ePDF MANUAL\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51570048663830,"sku":null,"price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/QXG__92423.1758585000.1280.1280.jpg?v=1784249816"},{"product_id":"tenderfoot-electronics-kombin-8","title":"Tenderfoot Electronics Kombin-8","description":"\u003ch2 data-end=\"4047\" data-start=\"4005\"\u003e\u003cspan data-end=\"4045\" data-start=\"4008\"\u003eTenderfoot Electronics – KOMBIN-8\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp data-end=\"4085\" data-start=\"4048\"\u003e\u003cspan data-end=\"4085\" data-start=\"4048\"\u003e8-Channel Dual-Bus Eurorack Mixer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"4459\" data-start=\"4087\"\u003eKOMBIN-8 is a compact, chainable 8-channel mono audio mixer designed for Eurorack. With two fully independent send\/return buses, it’s equally at home in traditional studio-style setups or experimental signal chains. Each channel offers dedicated send controls for both buses, plus rear-panel switches to select pre- or post-fader operation for ultimate routing flexibility.\u003c\/p\u003e\n\u003cp data-end=\"4813\" data-start=\"4461\"\u003eIts clean, passive-fader topology delivers low noise and a direct signal path, while the chainable design means you can link multiple units into larger mixing systems without adding complexity. Whether you’re building a compact performance skiff or a sprawling multi-case setup, KOMBIN-8 is ready to be the heart of your modular mix.\u003c\/p\u003e\n\u003cp data-end=\"4833\" data-start=\"4815\"\u003e\u003cspan data-end=\"4831\" data-start=\"4815\"\u003eKey Features\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-end=\"5250\" data-start=\"4834\"\u003e\n\u003cli data-end=\"4889\" data-start=\"4834\"\u003e\n\u003cp data-end=\"4889\" data-start=\"4836\"\u003e8 AC-coupled mono inputs, tolerant of ±12 V signals\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"4949\" data-start=\"4890\"\u003e\n\u003cp data-end=\"4949\" data-start=\"4892\"\u003eIndependent send controls for two effects buses (A \u0026amp; B)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5009\" data-start=\"4950\"\u003e\n\u003cp data-end=\"5009\" data-start=\"4952\"\u003ePre-fader or post-fader send selection via rear switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5067\" data-start=\"5010\"\u003e\n\u003cp data-end=\"5067\" data-start=\"5012\"\u003eMaster mix output with dedicated master level control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5131\" data-start=\"5068\"\u003e\n\u003cp data-end=\"5131\" data-start=\"5070\"\u003eChain multiple KOMBIN-8 modules for expanded channel counts\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5200\" data-start=\"5132\"\u003e\n\u003cp data-end=\"5200\" data-start=\"5134\"\u003eClassic passive-fader topology for low-noise, transparent mixing\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5250\" data-start=\"5201\"\u003e\n\u003cp data-end=\"5250\" data-start=\"5203\"\u003eCompact depth for skiff-friendly installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"5282\" data-start=\"5252\"\u003e\u003cspan data-end=\"5280\" data-start=\"5252\"\u003eTechnical Specifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-end=\"5454\" data-start=\"5283\"\u003e\n\u003cli data-end=\"5303\" data-start=\"5283\"\u003e\n\u003cp data-end=\"5303\" data-start=\"5285\"\u003e\u003cspan data-end=\"5295\" data-start=\"5285\"\u003eWidth:\u003c\/span\u003e 24 HP\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5324\" data-start=\"5304\"\u003e\n\u003cp data-end=\"5324\" data-start=\"5306\"\u003e\u003cspan data-end=\"5316\" data-start=\"5306\"\u003eDepth:\u003c\/span\u003e 20 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5383\" data-start=\"5325\"\u003e\n\u003cp data-end=\"5383\" data-start=\"5327\"\u003e\u003cspan data-end=\"5342\" data-start=\"5327\"\u003ePower Draw:\u003c\/span\u003e +12 V: 40 mA;    +5 V: 0 mA;    -12 V: 40 mA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"5416\" data-start=\"5384\"\u003e\n\u003cspan data-end=\"5444\" data-start=\"5419\"\u003eLow-Frequency Cutoff:\u003c\/span\u003e ~1.6 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eManual\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0042\/6042\/9935\/files\/KOMBIN8_manual2025.pdf?v=1754896089\" title=\"KOMBIN8 manual\"\u003e\u003cspan\u003eRead the manual here!\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"5647\" data-start=\"5456\"\u003e\u003cspan data-end=\"5472\" data-start=\"5456\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"5647\" data-start=\"5456\"\u003ePanel colours may show subtle variations between manufacturing runs.\u003c\/p\u003e","brand":"Tenderfoot Electronics","offers":[{"title":"Default Title","offer_id":51570049810710,"sku":null,"price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/kombin_-8__98870.1765557673.1280.1280.jpg?v=1784249933"}],"url":"https:\/\/boutiquepedalnyc.us\/collections\/mixer.oembed","provider":"BPNYC","version":"1.0","type":"link"}