{"title":"Jolin Lab","description":null,"products":[{"product_id":"jolin-lab-goblet-optocoupler-filther","title":"Jolin Lab GOBLET optocoupler filther","description":"\u003cp class=\"p1\"\u003eGOBLET optocoupler filther\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eGOBLET is an analog filter and distortion unit with some added quirks and extra controls.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003ewhy:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To make stuff sound filthy.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To shape the output of an oscillator.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To live interact with the sound during a performance.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To soft sweep the cutoff thanks to the optocouplers logarithmic response.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003ewith:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Simple waves – make them unrecognizable.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Complex waves – shape them into something new.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Percussions – crank the resonance and give an acid twist to a beat.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• No input – play with the feedback and the touch controls.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003ehow:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eStart with both faders ( frequency, resonance) at maximum, turn the trimmers fully clockwise and the feedback pot at 0. Now insert an input into and take the output either from - LP – or - notch. Start to turn the frequency trimmer until the resonance kicks in. Now adjust the resonance trimmer to your taste. The faders now have full range of responsiveness, start to play with them.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAdjust the feedback and start the filth.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e“This procedure is not mandatory at all – take it as a shortcut to understand how this filter works and how all the blocks are interconnected and weighted.”\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eInteract with the two touch plates\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eand the momentary button for extra distortion.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWill light up when a signal is plugged in the below jack. This acts as an accent CV input strictly related to the frequency and the total feedback amount.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003efeatures:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Unique analog two pole circuit with custom optocouplers fed directly in the feedback path.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Two step controls and individual CV inputs on frequency and resonance for precise sound sculpting.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Dedicated potentiometer for the total amount of feedback.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• A performance-oriented momentary switch for extra distortion.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Two expressive touch points to make your body interact with the circuit.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Rhythmically oriented accent CV input.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Two outputs – a smoother LP and an aggressive notch.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Works with audio and CV sources.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Single board design – extremely skiff friendly.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• “Whatever” power connector a.k.a. don’t mind the polarity.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003especs\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• current draw ⇒ +12V 45ma, -12V 25ma\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• dimensions\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e⇒\u003c\/span\u003e width 8HP, depth 18mm\u003c\/p\u003e","brand":"Jolin Lab","offers":[{"title":"Default Title","offer_id":51570000167190,"sku":null,"price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/goblet_front__13280.1681351077.1280.1280.jpg?v=1784246321"},{"product_id":"jolin-lab-getrekt-signal-squarifier","title":"Jolin Lab GETREKT signal squarifier","description":"\u003cp class=\"p1\"\u003eGETREKT is a full analogue waveshaper – an aggressive one.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003ewhy:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To add saturation and harmonics.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To disrupt – folding - and cut into pieces - clipping.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To generate square waves from other control voltage signals or audio sources.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• To invert the polarity of a trigger or other kind of pulses.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003ewith:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Sine waves – hear them scream.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Human voices – fracture them in pieces with clipping as a good ol’ broken tape would do.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Complex audio sources – to control and flatten them.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Envelopes going to a drum module – rectify or fold that decay tail.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003ehow:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFed an input – audio or CV – into and take the processed output from The circuit is designed to invert the polarity of any given input.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e“Disrupt and Pieces are analog touch controls; they act like potentiometers and they keep the value once the finger is lifted from the surface.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAs it takes time to turn a pot, it takes time to interact with these controls:\u003c\/p\u003e\n\u003cp class=\"p2\"\u003ebridge with your finger the first line and the center III to decrease the value or the center and the last one III to increment. A red and a blue LEDs will light up to give visual feedback of the position of the control.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis is a full analogue continuous control, designed to be an expressive and interactive gateway to decrease the boundaries between the user, the environment and the music-making-devices.”\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDISRUPT: controls how much the output is affected by the waveshaper circuit. At maximum it will fold and create a total harmonic distortion.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePIECES: the pulse width of the resulting transformed wave.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBoth parameters have a dedicated reactive CV input. If connected, the touch potentiometer act as an offset of the incoming signal.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003efeatures:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Clipping and folding analog waveshaper circuit.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Touch Controls on the amount of effect and PWM.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Reactive CV inputs on both parameters.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Inverts the polarity of any given input.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Works with audio and CV sources.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• Single board design – extremely skiff friendly.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• “Whatever” power connector a.k.a. don’t mind the polarity.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003especs:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• current draw ⇒ +12V 35ma, -12V 30ma\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e• dimensions\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e⇒\u003c\/span\u003e width 4HP, depth 18mm\u003c\/p\u003e","brand":"Jolin Lab","offers":[{"title":"Default Title","offer_id":51570000232726,"sku":null,"price":96.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/getrekt_front__08292.1680555973.1280.1280.jpg?v=1784246327"},{"product_id":"jolin-lab-knobi-macro-controller","title":"Jolin Lab KNOBI macro controller","description":"\u003cp\u003e\u003cspan\u003eKNOBI \u003c\/span\u003eis a multi-tool able to mix, attenuate, invert, display and multiply any kind of signal.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eKnobi\u003c\/em\u003e can serve a wide range of purposes – \u003cem\u003enot only to pass butter\u003c\/em\u003e - and this is true thanks to its internal signal path that makes use of some of the most useful building blocks of analog synthesis: a 4-channel mixer, a three-range offset, an attenuverter, a fixed manual gate and lastly a cascading multiple derived from the output stage of Agogô.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ea\u003c\/span\u003e, \u003cspan\u003eb\u003c\/span\u003e, \u003cspan\u003ec\u003c\/span\u003e and \u003cspan\u003ed\u003c\/span\u003e are \u003cem\u003eKnobi\u003c\/em\u003e’s inputs while \u003cspan\u003er \u003c\/span\u003eis a fixed 5v reference output. The toggle switch next to \u003cspan\u003ed\u003c\/span\u003e sets the range of the offset – the big knob below the meter. Connect a signal into one of the inputs to visualize its voltage value in the three digits meter. Keep in mind that this reading happens post offset and attenuverter – the smaller knob with (-) and (+) indications.\u003c\/p\u003e\n\u003cp\u003eThe pushbutton next to \u003cspan\u003ex4 \u003c\/span\u003eadds a gate of 5v to the mix: with no input connected it will act as a manual gate output. Autopatch the\u003cspan\u003e r\u003c\/span\u003e reference output into one of the inputs to use Knobi as a macro controller thanks the offset knob and switch to set the range and the attenuverter.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ex1\u003c\/span\u003e, \u003cspan\u003ex2\u003c\/span\u003e, \u003cspan\u003ex3\u003c\/span\u003e and\u003cspan\u003e x4\u003c\/span\u003e are all cascading copies of the final signal path. Plugging a cable will break the normalization and the multiplication will reset starting from the next output. Four cables plugged in will output a copy at the same factor x1 - unity gain – making Knobi a versatile buffered multiple.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003eThermal compensated 5v voltage source with dedicated output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFour channel mixer with four buffered output.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBuilt in 3 digits voltage meter post mix \/ attenuation \/ inversion.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOffset with a dedicated three positions range toggle.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eManual gate button tied to the mix.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e4 cascading outputs in an open design configuration.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUnique signal path: mix – attenuate – invert – add – visualize – multiplicate.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e“Whatever” power connector a.k.a. don’t mind the polarity.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e• width 6HP\u003c\/p\u003e\n\u003cp\u003e• depth 25mm\u003c\/p\u003e\n\u003cp\u003e• 50mA +12V\u003c\/p\u003e\n\u003cp\u003e• 30mA -12V\u003c\/p\u003e\n\u003cp\u003e\u003ca class=\"sqs-block-button-element--medium sqs-button-element--primary sqs-block-button-element\" data-initialized=\"true\" href=\"https:\/\/jolin.tech\/s\/knobi_how_to.pdf\" target=\"_blank\"\u003eMANUAL\u003c\/a\u003e\u003c\/p\u003e","brand":"Jolin Lab","offers":[{"title":"Default Title","offer_id":51570011341078,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/knobi__99279.1688790028.1280.1280.jpg?v=1784247229"}],"url":"https:\/\/boutiquepedalnyc.us\/collections\/jolin-lab.oembed","provider":"BPNYC","version":"1.0","type":"link"}