{"title":"Eurorack Expander","description":"","products":[{"product_id":"befaco-hexpander-hexmix-expander","title":"BEFACO HEXPANDER -Hexmix expander","description":"\u003cp class=\"lead wrap\"\u003eUse it with your Hexmix for more performance!\u003c\/p\u003e\n\u003cp class=\"lead wrap\"\u003eHexmix expander with 3 aux sends, PFL, individual outs per channel and master balanced out\u003c\/p\u003e\n\u003cp\u003eHexpander adds great functionality to Hexmix module. Featuring Three aux send with auxiliary returns, individual outputs for each channel, complete PFL system and balanced output.\u003cbr\u003eHexpander is designed to be placed on top of Hexmix. Expanding eurorack concept to 6u, allow every channel to be aligned as in traditional tabletop mixers.\u003c\/p\u003e\n\u003cp\u003eFor every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.\u003c\/p\u003e\n\u003cp\u003eEvery auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal pre or post fader\/EQ in parallel.\u003cbr\u003eReturns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set properly, for example, either to a guitar pedal or a FX module at synth level.\u003c\/p\u003e\n\u003cp\u003eHexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.\u003cbr\u003eFlip PFL switch to send that channel to the headphones out. With PFL\/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.\u003cbr\u003eLevel meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.\u003c\/p\u003e\n\u003cp\u003eEvery channel has individual 6,5\" jacks out at line level.Here you heve the signal of every channel post EQ.\u003cbr\u003eAs an addition, you have master balanced output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e137 mA +12V\u003c\/li\u003e\n\u003cli\u003e64 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937776918,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_2__97931.1571362604.1280.1280.jpg?v=1785019896"},{"product_id":"endorphin-es-shuttle-mate","title":"Endorphin.es  Shuttle Mate","description":"\u003cp\u003eYour Best Mate!\u003c\/p\u003e\n\u003ch2 class=\"Modulname\" id=\"u11321-2\"\u003eShuttle Mate\u003c\/h2\u003e\n\u003cul class=\"list0 nls-None\" id=\"u11321-11\"\u003e\n\u003cli class=\"Aufz-hlung\" id=\"u11321-4\"\u003e6 HP width, up to 1 1\/3“ in depth\u003c\/li\u003e\n\u003cli class=\"Aufz-hlung\" id=\"u11321-6\"\u003emerge MIDI and USB-MIDI streams into one MIDI\/USB MIDI flow\u003c\/li\u003e\n\u003cli class=\"Aufz-hlung\" id=\"u11321-8\"\u003eperfect mate for Shuttle Control to be able to connect a few MIDI devices into Shuttles ‚to host‘ input (e.g., merge drum machine‘s MIDI clock while playing with your MIDI controller)\u003c\/li\u003e\n\u003cli class=\"Aufz-hlung\" id=\"u11321-10\"\u003eno bus power required – device runs fully on power delivered from USB socket, however it also may be powered from the bus board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"AccordionWidget clearfix colelem\" id=\"accordionu11326\"\u003e\n\u003cli class=\"AccordionPanel clearfix colelem\" id=\"u11327\"\u003e\n\u003cdiv class=\"AccordionPanelTab clearfix colelem AccordionPanelTabOpen\" data-muse-type=\"txt_frame\" data-muse-uid=\"U11330\" id=\"u11330-4\"\u003e\n\u003cp\u003eMORE\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"AccordionPanelContent colelem AccordionPanelContentActive\"\u003e\n\u003cdiv class=\"AccordionPanelContentClip\"\u003e\n\u003cdiv class=\"clearfix\" id=\"u11328\"\u003e\n\u003cdiv class=\"Link_More_Box clearfix grpelem\" data-ibe-flags=\"txtStyleSrc\" data-muse-type=\"txt_frame\" data-muse-uid=\"U11329\" id=\"u11329-6\"\u003e\n\u003cp\u003e\u003ca class=\"nonblock\" data-href=\"upload:U11486\" href=\"http:\/\/endorphin.es\/assets\/endorphin.es_shuttle_mate_manual_1.02.pdf\" target=\"_blank\"\u003eManual\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Endorphin.es","offers":[{"title":"Default Title","offer_id":51569948459286,"sku":null,"price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/SM__44062.1576647339.1280.1280.jpg?v=1785057652"},{"product_id":"xor-electronics-nerdseq-cv16-expander","title":"XOR Electronics NERDSEQ – CV16 EXPANDER","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is the CV 16 Expander for the NerdSEQ\u003c\/p\u003e\n\u003cp\u003eIt adds 16 additional CV outputs to the NerdSEQ.\u003c\/p\u003e\n\u003cp\u003eThe CV outputs can be either pitch or note scaled (in pairs of 0..10 Volt or -5\/+5 Volt). Beside being outputs for notes or pitches with glide settings for each output, it also contains several modulators which can be routed to each output (pure or adding to the current voltage):\u003cbr\u003e8 ASR (Attack Sustain Release) Envelopes with Attack, Release and Sustain settings for each Envelope.\u003cbr\u003e8 LFO with the following waveforms: Sinus, Triangle, Sawtooth, Ramp, Noise and Random (randomly mixing through the waveforms).\u003c\/p\u003e\n\u003cp\u003eThe modulators can be manipulated  in their stage and attributes from each sequencer step. The CV16 expander enhances the NerdSEQ with Polyphonic sequencing and recording within one or multiple tracks.\u003c\/p\u003e\n\u003cp\u003eThis is not a standalone product! It works only together with the NerdSEQ.\u003c\/p\u003e\n\u003cp\u003eWidth: 8HP\u003c\/p\u003e\n\u003cp\u003eThe CV16 expander will be delivered with a ribbon cable for the interconnection\u003c\/p\u003e\n\u003cdiv class=\"iconbox_content\"\u003e \u003c\/div\u003e","brand":"XOR Electronics","offers":[{"title":"Silver SOLD OUT","offer_id":51569964122390,"sku":null,"price":209.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51569964155158,"sku":null,"price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Blank_1U_6hp_copy_8__18744.1603775149.1280.1280.jpg?v=1785022054"},{"product_id":"maneco-labs-grone-dark-drone-machine-expander-eurorack","title":"Maneco Labs GRONE dark drone machine EXPANDER (eurorack)","description":"\u003cp\u003e\u003ca class=\"download\" href=\"https:\/\/8224-37920-1594131663-maneco-7dwj6pixsx8det.stackpathdns.com\/wp-content\/uploads\/grone-expander-manual.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDownload Specification PDF ⇩\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 voice touch controlled drone module\u003c\/li\u003e\n\u003cli\u003e2 Drone oscillators same as Grone\u003c\/li\u003e\n\u003cli\u003e2 wavetable oscillators\u003c\/li\u003e\n\u003cli\u003e2 multi waveform lfo’s\u003c\/li\u003e\n\u003cli\u003eModulated delay section\u003c\/li\u003e\n\u003cli\u003eDirt stage at output\u003c\/li\u003e\n\u003cli\u003eCan be used stand alone or processed through grone external input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eOsc\u003c\/strong\u003e \u003cstrong\u003e1\u003c\/strong\u003e \u003cstrong\u003eand\u003c\/strong\u003e \u003cstrong\u003e3\u003c\/strong\u003e \u003cstrong\u003e-\u003c\/strong\u003e \u003cstrong\u003eBytebeat\u003c\/strong\u003e \u003cstrong\u003eoscillators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eGenerates sound based on equations converted to analog signals , there are sixteen equations selected by Up and Down switches. Four LEDs indicate equation number in binary mode. Three Pots modify numbers used by the equation, A0 , A1 and A2 , fourth pot Sample Rate controls pitch and speed of the oscillation. There’s an Output Level pot for the oscillator and a dedicated jack for patching the Oscillator sound to external modules .\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eHold toggle switches select between fast decay, long decay and hold mode, for the touch trigger input. There are CV inputs for pitch on these two oscillators\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eOsc\u003c\/strong\u003e \u003cstrong\u003e2\u003c\/strong\u003e \u003cstrong\u003eand\u003c\/strong\u003e \u003cstrong\u003e4\u003c\/strong\u003e \u003cstrong\u003e-Wavetable\u003c\/strong\u003e \u003cstrong\u003eoscillators\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDigital oscillators, touch controlled or gate controlled by gate jacks, pitch is controlled by pitch pot, modulation by LFO A or LFO B and cv inputs.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eA0 pot selects waveform, A1 pot morphs between two waveforms.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThere are individual output jacks.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003eLFO\u003c\/strong\u003e \u003cstrong\u003e1\u003c\/strong\u003e \u003cstrong\u003eand\u003c\/strong\u003e \u003cstrong\u003e2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eLow frequency oscillator routed to MOD inputs for oscillators 2 and 4, also to modulation input for delay section, selectable by toggle switch , RATE and WAVEFORM shape\u003c\/p\u003e\n\u003cp class=\"p1\"\u003epots.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cstrong\u003e36HP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e-4mA \/ -12V\u003c\/p\u003e\n\u003cp\u003e+110mA \/ +12V\u003c\/p\u003e","brand":"Maneco Labs","offers":[{"title":"Default Title","offer_id":51569972609302,"sku":null,"price":469.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/IMG_1851__28367.1683228078.1280.1280.jpg?v=1784245178"},{"product_id":"xor-electronics-nerdseq-more-video-io-expander","title":"XOR Electronics NERDSEQ – MORE VIDEO-IO EXPANDER","description":"\u003cp\u003eThis is the More Video-IO Expander  for the NerdSEQ\u003c\/p\u003e\n\u003cp\u003eIt adds a HDMI (Type A) or Composite breakout for the NerdSEQ screen as well as a USB Host input for connecting a Computer\/PC Keyboard. The video outputs are currently able to perfectly clone the NerdSEQ screen as well as some experimental visual generation (visual functions are currently very limited, unfinished and experimental, but will be more advanced on the way…).\u003c\/p\u003e\n\u003cp\u003eThe keyboard layout has been optimized to provide all NerdSEQ functions directly together with additional live editing and performance possibilities. Currently the USB Host port supports only a USB Computer-Keyboard. There is no USB Midi support with the Video-IO Expander.  (The USB-Midi expander is another future product)\u003c\/p\u003e\n\u003cp\u003eThe expander uses one NSA Port (fixed port 4).\u003c\/p\u003e\n\u003cp\u003eWidth: 6HP (42cm\/1.64″deep)\u003c\/p\u003e\n\u003cp\u003eThis is not a standalone product! It works only together with the NerdSEQ.\u003c\/p\u003e\n\u003cp\u003ePlease check this \u003ca href=\"https:\/\/xor-electronics.com\/forum\/showthread.php?tid=1140\u0026amp;pid=7035#pid7035\"\u003eforum post\u003c\/a\u003e to find out about the keyboard layout as well as some additional information. The Manual with all information will be updated with the new firmware Release which enables the Video-Expander functionality. The new firmware will be released before July 4th.\u003c\/p\u003e\n\u003cp\u003eThe More Video-IO expander will be delivered with 2 ribbon cables for the interconnection.\u003cbr\u003ePlease be aware that it doesn’t contain a HDMI cable.\u003c\/p\u003e","brand":"XOR Electronics","offers":[{"title":"Black Pre-Order","offer_id":51569985061142,"sku":null,"price":349.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51569985093910,"sku":null,"price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Video_IO_Black__97720.1625892781.1280.1280.jpg?v=1784787417"},{"product_id":"cosmotronic-messor","title":"Cosmotronic Messor Pre-Order","description":"\u003cp class=\"p1\"\u003eMessor is an analog stereo compressor with lots of tricks up its sleeves in only 8HP.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eFrom squashing drums, sidechaining kicks and sculpting transients, to glueing a mix together, it's a very versatile dynamics manager.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003efeed-forward compressor is VCA based with a hifi low noise signal path. The magic is in the internal sidechain that shapes the gain reduction envelope.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThere are the familiar controls of a compressor, attack, release, threshold, ratio and makeup gain, as well as a switchable high-pass \/ low-pass sidechain filter.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe ratio can go past limiting and into over-compression, which can completely reshape transients, a great tool for sound design.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBeing modular, of course there are CV inputs for Attack, Release and the side-chain Filter cutoff. \u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Gain CV controls the makeup gain, but also doubles as a Stereo VCA with the Gain knob turned fully CCW.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe gain reduction envelope is also available as an output, for turning filters or other VCA's into compressors for example, or as a standalone envelope follower.\u003c\/p\u003e\n\u003cp class=\"p2\"\u003e \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThere's a bypass switch, and a Warm mode, that can bring in a bit of additional saturation and compression in the form of analog tube simulation circuitry.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eLastly there's the possibility to insert an external sidechain, for that classic kick sidechain compression.\u003c\/p\u003e","brand":"Cosmotronic","offers":[{"title":"Black","offer_id":51569992696086,"sku":null,"price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/messor_black__66768.1765409033.1280.1280.jpg?v=1784245875"},{"product_id":"divkid-mutes-mk2","title":"Divkid Mutes MK2 Pre-Order","description":"\u003ch1 class=\"h1 page-title\"\u003e\u003cspan\u003eDivKid MUTES mk2\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eMutes goes above and beyond basic muting by allowing you to split groups of signals to multiple destinations, making it great for FX dub performing and varied signal routing.\u003c\/p\u003e\n\u003cp\u003eBased on VCA for more precision in both modulation and audio as well as click-free muting.\u003c\/p\u003e\n\u003cp\u003eThree-position switch: MOMENTARY signal pass-through (it springs back to the center when released); OFF (or muted) in the center; and ON to the right.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003cp\u003e\u003cspan\u003eThe module can be easily converted into a 1U version (panel included).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e \u003c\/span\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_button_module_wrapper et_pb_button_0_wrapper et_pb_module\"\u003e\n\u003cdiv class=\"et_pb_with_border et_pb_module et_pb_text et_pb_text_1 et_pb_text_align_center et_pb_bg_layout_dark\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e LEDs to visualise signals\u003c\/li\u003e\n\u003cli\u003e3 way momentary – off – on switching\u003c\/li\u003e\n\u003cli\u003eBuffered and cascading normalising of inputs\u003c\/li\u003e\n\u003cli\u003eVCA based muting\u003c\/li\u003e\n\u003cli\u003eInterchangeable panel to 1U\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_1_3 et_pb_column_3 et_pb_css_mix_blend_mode_passthrough\"\u003e\n\u003cdiv class=\"et_pb_with_border et_pb_module et_pb_text et_pb_text_2 et_pb_text_align_center et_pb_bg_layout_dark\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent needs: +12V:40mA, -12V:15mA\u003c\/li\u003e\n\u003cli\u003eWidth: 4 HP\u003c\/li\u003e\n\u003cli\u003eDepth assembled version:  20 mm\u003c\/li\u003e\n\u003cli\u003eDepth DIY version: 40 mm\u003c\/li\u003e\n\u003cli\u003eDesigned, kits prepared and completed modules assembled in Barcelona\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Divkid","offers":[{"title":"Default Title","offer_id":51569996955926,"sku":null,"price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/divkid_mutes_mk2__67077.1770372394.1280.1280.jpg?v=1784246125"},{"product_id":"instruo-ochd-expander","title":"Instruo ochd expander","description":"\u003cp class=\"p1\"\u003eMeet the Instruō øchd expander ([ø]4^2), an expansion module for one of Eurorack’s most beloved modulation sources, øchd.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eLaunched in 2019 and designed in collaboration with Ben “DivKid” Wilson, the Instruō øchd has set a standard for compact and versatile modulation sources which can now be seen across thousands of eurorack systems. The Instruō øchd expander [ø]4^2 adds 16 outputs and 4 new sets of functionality to øchd’s normal operation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eUsing øchd’s LFOs as signal sources, øchd expander [ø]4^2 adds full wave rectified unipolar positive LFOs, analog diode logic for minimum and maximum voltage mixing, cascaded stochastic trigger signals for interesting rhythmic patterns, and R-2R 4-bit random voltage sources for all things wild and chaotic – all of which are controlled by øchd’s single frequency control and CV attenuverter.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e8 LFOs in 4 HP is great and all, but 24 modulation sources in 8 HP is much, much better.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eøchd expander \u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"s1\"\u003e| \u003cspan\u003efunction\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e (maths) \u003c\/span\u003e8+4^2 = more modulation\u003c\/p\u003e\n\u003ch2\u003e\u003ca href=\"https:\/\/www.instruomodular.com\/wp-content\/uploads\/2023\/10\/ochd-expander-Manual-web.pdf\"\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan\u003eMANUAL\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.instruomodular.com\/wp-content\/uploads\/2023\/10\/ochd-expander-Quickstrart-web.pdf\"\u003e\u003cspan\u003eQUICKSTART GUIDE\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e4HP\u003cbr\u003eDepth: 32mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan class=\"s1\"\u003ePower\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan class=\"s1\"\u003e+12V: 5mA\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e–12V: 50mA\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cul\u003e\n\u003cli class=\"p1\"\u003e16 additional outputs for øchd\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e4x full wave rectified unipolar positive LFOs\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e2x Analog diode logic pairs (AND\/Min and OR\/Max)\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e4x Cascading stochastic trigger signals\u003c\/li\u003e\n\u003cli class=\"p1\"\u003e4x R-2R 4-bit logic random voltage sources (slow noise)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Instruō","offers":[{"title":"Default Title","offer_id":51570014486806,"sku":null,"price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/OCHD_expander__64607.1698342754.1280.1280.jpg?v=1784247460"},{"product_id":"boredbrain-xcelon-xp3","title":"Boredbrain xcelon xp3","description":"\u003cp\u003e\u003cspan\u003e3-CHANNEL STEREO MIX EXPANDER\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"features\"\u003e\n\u003cli\u003eAdds three stereo\/dual-mono channels to Xcelon mixer (up to two supported)\u003c\/li\u003e\n\u003cli\u003eTwo stereo FX sends and two stereo output mix busses selectable per-channel\u003c\/li\u003e\n\u003cli\u003eVariable input gain for both modular and line-level sources\u003c\/li\u003e\n\u003cli\u003eLong-travel volume faders with CV responsive LED indicators\u003c\/li\u003e\n\u003cli\u003eBalance controls with pan law curve and dual-mono crossfade mode\u003c\/li\u003e\n\u003cli\u003eClickless mutes and VU meters on all channels\u003c\/li\u003e\n\u003cli\u003eTwelve discrete control voltage inputs\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers for pre\/post-fader FX and meters, plus volume VCA mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"wp-block-heading has-nv-light-bg-color has-text-color\"\u003e\u003cstrong\u003eModular mixing expanded\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"has-nv-light-bg-color has-text-color has-medium-font-size\"\u003eXcelon XP3 is a three-channel stereo expander for the Xcelon eurorack mixer. The module’s channels are identical to those found on the main mixer. Up to two XP3 can connect to Xcelon, expanding the total number of mixer channels to either nine or twelve.\u003c\/p\u003e\n\u003ch3 class=\"wp-block-heading\"\u003eChannel Expansion\u003c\/h3\u003e\n\u003cp\u003eThe 22HP module has the same channel inputs, channel controls, direct outputs and rear jumpers as \u003ca href=\"https:\/\/boredbrainmusic.com\/product\/xcelon\"\u003eXcelon\u003c\/a\u003e. The primary difference is that the expander lacks the mix outputs and FX i\/o section. This is because XP3 shares the two main mix busses and two FX sends busses with the main mixer.\u003c\/p\u003e\n\u003cp\u003eXP3 is connected to the main Xcelon mixer using the supplied 16-pin ribbon cable, from the port labeled \u003cstrong\u003eMIXER\u003c\/strong\u003e to one of the two expansion ports labeled \u003cstrong\u003eEXPANDER 1\u003c\/strong\u003e or \u003cstrong\u003eEXPANDER 2\u003c\/strong\u003e. These expansion ports are found on the backs of both modules. Because the mixer supports up to two XP3, a set of channel labels with 10, 11, and 12 are included to update the front panel.\u003c\/p\u003e\n\u003cp\u003eIt may be possible to connect more than two channel expanders using a flying bus cable, but low noise performance cannot be guaranteed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eIMPORTANT\u003c\/strong\u003e: The expander ports should \u003cstrong\u003eNOT\u003c\/strong\u003e be connected to a eurorack power bus or damage to the module(s) can occur.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Input\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eEach of the three channels has a pair of audio input jacks\u003cstrong\u003e (INPUT 7\u003c\/strong\u003e, \u003cstrong\u003eINPUT 8\u003c\/strong\u003e, etc.) for left and right stereo signals. The jacks are normalled such that a single mono source in the left jack is simply copied to the right. Alternatively, two discrete mono sources can also share a channel (see \u003cstrong\u003eXFADE\u003c\/strong\u003e). These AC-coupled coupled inputs accept typical eurorack-level audio signals, as well as line-level audio signals when boosted using the channel’s \u003cstrong\u003eGAIN\u003c\/strong\u003e control.\u003c\/p\u003e\n\u003cp\u003eThe four jacks directly below each pair of audio inputs are CV inputs, which allow for voltage control of the channel parameters. \u003cstrong\u003eVOL\u003c\/strong\u003e affects the volume within a range of 0 to +5V. By default, this control voltage input is biased by the fader position (summed), but in VCA mode it is attenuated by the fader (see Jumper Settings). \u003cstrong\u003eBAL\u003c\/strong\u003e affects the channel balance within a range of -5V to 5V (even with \u003cstrong\u003eXFADE\u003c\/strong\u003e enabled), while \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e affect their respective send levels within a range of 0 to +5V. These latter three control voltage inputs are all biased by their knob positions.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\n\u003cstrong\u003eChannel Control\u003c\/strong\u003e\u003cstrong\u003es\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGAIN\u003c\/strong\u003e parameter is used to boost the channel’s input signal(s) up to +15 dB if necessary. Most eurorack audio sources may only need a small amount of gain, whereas line-level signals may require turning the knob up to the \u003cstrong\u003eLINE\u003c\/strong\u003e position. The red \u003cstrong\u003ePK\u003c\/strong\u003e (peak) indicator will illuminate just before either input signal becomes audibly distorted. For a clean mix, best practice is to set the \u003cstrong\u003eGAIN\u003c\/strong\u003e such that only loud transients trigger the \u003cstrong\u003ePK\u003c\/strong\u003e LED.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAL\u003c\/strong\u003e parameter adjusts the balance of the channel’s two input signals, and behaves much like a pan control, especially with a mono input signal. Control of the parameter is not linear, but instead implements a curve according to the -4.5 dB pan law. This yields a more natural sounding stereo panning.\u003c\/p\u003e\n\u003cp\u003eWhen the blue \u003cstrong\u003eXFADE\u003c\/strong\u003e button is engaged, the channel is configured in dual-mono mode. Both channel input signals are positioned to stereo center, and the \u003cstrong\u003eBAL\u003c\/strong\u003e parameter acts as a mono crossfader balancing the two signal levels. Signals that do not need stereo panning can then be doubled-up on a single channel, such as kick and snare drum, two different bass sounds, etc.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eVOL\u003c\/strong\u003e parameter adjusts the channel volume, and is also commonly referred to as the channel fader. Its 45mm vertical slider has a linear volume response for smooth fade ins and outs, with an entirely usable range. The brightness of the white LED indicates the volume position, and is of course responsive to incoming CV.\u003c\/p\u003e\n\u003cp\u003eNext to the volume control is a 5-segment \u003cstrong\u003eVU METER\u003c\/strong\u003e to help visualize signal level and dynamics. The meter is affected by both left and right channel signals. And although it does behave according to a decibel scale, the meter is intentionally biased upward for better resolution when comparing relative channel levels. By default, the \u003cstrong\u003eVU METER\u003c\/strong\u003e is post-fader, meaning it is affected by volume adjustments, but can optionally be configured pre-fader (see Jumper Settings).\u003c\/p\u003e\n\u003cp\u003eThe red \u003cstrong\u003eMUTE\u003c\/strong\u003e button, when activated, will effectively silence the channel with up to -93 dB of normal signal attenuation. Its electronically latching circuit is completely VCA-based with a very fast on\/off slew, eliminating any clicks or pops when muting or unmuting the channel.\u003c\/p\u003e\n\u003cp\u003eThe channel’s two gray knobs, \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e, are independent stereo effects sends. Using these parameters, an adjustable amount of the channel signal can be sent to the two shared effects busses \u003cstrong\u003eFX SND 1\u003c\/strong\u003e and \u003cstrong\u003eFX SND 2\u003c\/strong\u003e, which are commonly used for time-based effects such as delay and reverb. By default, both \u003cstrong\u003eFX1\u003c\/strong\u003e and \u003cstrong\u003eFX2\u003c\/strong\u003e are post-fader sends, meaning the amount of sent signal is also affected by the channel’s volume position. However, \u003cstrong\u003eFX1\u003c\/strong\u003e can be configured pre-fader (see Jumper Settings) to achieve a more than 50% wet mix of effect versus dry signal.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eAB\u003c\/strong\u003e switch assigns the channel output to one or both main output mix busses. In the leftmost and rightmost positions, the channel is routed to only one of the two busses, either A or B. In the middle position however, the channel is routed to both simultaneously, allowing for parallel processing, AFL monitoring (after fade listen), and other creative uses.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eDirect Outputs\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eJust like the main mixer, XP3 is also equipped with several direct output ports to access individual channel signals for multi-track recording. Its bank of three stereo channels has two direct output ports, \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST, \u003c\/strong\u003eto tap the channel signals either before or after the volume faders.\u003c\/p\u003e\n\u003cp\u003eThese groupings of six signals are connected using an 8-pin cable to the optional direct output modules, Xcelon TRS and Xcelon DB25 (TBA), for balanced line outputs. They can be mixed and matched in any order, and both the \u003cstrong\u003ePRE\u003c\/strong\u003e and \u003cstrong\u003ePOST\u003c\/strong\u003e direct outputs for a bank of channels can be used simultaneously. This leaves the door open for future expansion such as dedicated cue monitoring and additional effects sends.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-spacer\"\u003e \u003c\/div\u003e\n\u003ch3 class=\"wp-block-heading\"\u003e\u003cstrong\u003eJumper Settings\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eEach channel has three custom settings found on the back of the module, which are configured using one or more jumpers.\u003c\/p\u003e\n\u003cdiv class=\"wp-block-columns is-layout-flex wp-container-core-columns-layout-2 wp-block-columns-is-layout-flex\"\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVU METER\u003c\/th\u003e\n\u003cth\u003e1 jumper\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eMeter is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMeter is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003ePRE is very common on DJ mixers, and is useful for adjusting the gain and visually identifying a signal before bringing it into the mix.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eFX SND1\u003c\/th\u003e\n\u003cth\u003e2 jumpers\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003ePOST\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eSent signal is affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003ePRE\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSent signal is not affected by the channel volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003ePRE is useful (and necessary) to get a very washed-out effect where the effects mix is more than 50% wet.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ctable class=\"has-fixed-layout\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"has-text-align-center\" data-align=\"center\"\u003eVOL CV\u003c\/th\u003e\n\u003cth\u003e3 jumpers (or 2)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\n\u003cstrong\u003eMOD\u003c\/strong\u003e\u003cbr\u003e(default)\u003c\/td\u003e\n\u003ctd\u003eCV modulates volume with fader bias\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"has-text-align-center\" data-align=\"center\"\u003e\u003cstrong\u003eVCA\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCV replaces bias voltage and fader attenuates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cem\u003eVCA allows the volume circuit to be used as the final VCA in a patch, saving space and modules. Simply patch an envelope into the \u003cstrong\u003eVOL\u003c\/strong\u003e CV input, and use the fader to adjust the level.\u003c\/em\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"\u003e\n\u003ch4 class=\"wp-block-heading\"\u003etechnical specs\u003c\/h4\u003e\n\u003cul class=\"specs\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Inputs:\u003c\/strong\u003e 6 x 3.5 mm jacks (3 stereo pairs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCV Inputs:\u003c\/strong\u003e 12 x 3.5 mm jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 100 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Input Gain:\u003c\/strong\u003e +15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 22 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 1.5 in (38 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 oz (312 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +12 V 190 mA (250 max), -12 V 150 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 class=\"wp-block-heading\"\u003emix tips\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eGAIN FOR PERFORMANCE\u003c\/strong\u003e\u003cstrong\u003e \u003c\/strong\u003e– A useful tip for performance is to set each GAIN such that your mix sounds correct with all the faders up or at the same position. Now returning to a “balanced” mix is as simple moving faders back to the same position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAUDIO VCA PATCH\u003c\/strong\u003e – Save space in a case for live performance or save VCAs for other purposes by using the VCA mode jumper setting for VOL CV. This allows a typical envelope to be fed into the CV input, and the overall volume can still be adjusted normally.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e100% WET FX\u003c\/strong\u003e – If mix bus B is unused or not monitored, any channel can have a fully wet FX mix (no dry signal), even with rear jumpers set to POST. Just assign the channel to mix B (essentially muting it), be sure the FX return is assigned to mix A, and turn up the FX send of the channel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eXFADE MUTATION\u003c\/strong\u003e – The XFADE feature can be used to “mutate” a sound, crossfading between to similar sounds or waveforms. This is especially interesting when modulating with a rapidly changing CV signal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFX RETURNS MUTE\u003c\/strong\u003e – Although the FX returns do not have mute buttons, the AB switch can be used to quickly remove them from either the A or B mix, which is still very effective during a live mix.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"xcelon-channel-wireframe-v1.0.png\" class=\"__mce_add_custom__\" height=\"600\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon-channel-wireframe-v1.0.png?v=1784247487\" title=\"xcelon-channel-wireframe-v1.0.png\" width=\"277\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016452886,"sku":null,"price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon_xp3__64470.1701480861.1280.1280.jpg?v=1784247500"},{"product_id":"boredbrain-xcelon-xcelon-xp3-bundle","title":"Boredbrain xcelon \u0026 xcelon xp3 Bundle Pre-Order","description":"\u003cp\u003e\u003cstrong\u003eBoredbrain xcelon \u0026amp; xcelon xp3 Bundle\u003c\/strong\u003e\u003c\/p\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570016518422,"sku":null,"price":1378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/xcelon_XP3_bundle__24197.1701481085.1280.1280.jpg?v=1784247498"},{"product_id":"boredbrain-xcelon-xi3","title":"Boredbrain xcelon Xi3","description":"\u003cdiv data-oe-version=\"1.2\"\u003eMINI 3-CHANNEL MIX EXPANDER\u003c\/div\u003e\n\u003cdiv class=\"container s_allow_columns\"\u003e\n\u003cul\u003e\n\u003cli\u003eAdds three stereo\/dual-mono channels to Xcelon mixer in just 8 HP\u003c\/li\u003e\n\u003cli\u003eTwo stereo FX sends and two stereo output mix busses selectable per-channel\u003c\/li\u003e\n\u003cli\u003eVCA-based volume controls with CV input and responsive LED indicators\u003c\/li\u003e\n\u003cli\u003eConfigurable jumpers for dual-mono operation allowing up to six mono sources\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003ePre\/post-fader direct output ports for all three stereo channels\u003c\/li\u003e\n\u003cli\u003e\n\u003ch2\u003eMore inputs, less HP\u003c\/h2\u003e\n\u003cp\u003e\u003cspan class=\"base-fs\"\u003eXcelon Xi3 is a compact three-channel stereo input expander for the Xcelon eurorack mixer.  The module includes core mixing features and connections meant to expand the number of mixer inputs without sacrificing valuable space.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 8HP module provides essential channel parameters for each channel such as volume control, both stereo effects sends, and mix bus selection. Xi3 channels share the same mix bus and FX send architecture as the main mixer, integrating seamlessly within the Xcelon system. Like the Xcelon and XP3 channel expander, Xi3 also includes both pre and post-fader direct output headers for advanced routing and multi-channel recording. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eConnection \u0026amp; Configuration\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eXi3 is connected to the main Xcelon mixer using the supplied 16-pin ribbon cable, from its port labeled \u003cspan\u003eMIXER\u003c\/span\u003e to one of Xcelon’s two expansion ports labeled \u003cspan\u003eEXPANDER 1\u003c\/span\u003e or \u003cspan\u003eEXPANDER 2\u003c\/span\u003e. The mixer supports up to two channel expanders using any combination of Xi3 and\/or XP3 modules. It is possible to connect more than two channel expanders using a flying bus cable, but low noise performance cannot be guaranteed.\u003c\/p\u003e\n\u003cdiv class=\"s_alert s_alert_md alert alert-info w-100 clearfix\" data-name=\"Alert\" data-snippet=\"s_alert\"\u003e\n\u003cdiv class=\"s_alert_content\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"text-o-color-5\"\u003eThe expander ports should NOT be connected to a eurorack power bus or damage to the module(s) can occur.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eEach of the three channels has a pair of audio input jacks (IN 10 L, IN 10 R, etc.) for left and right stereo signals. These inputs are designed to accept typical eurorack-level audio signals from -5 V to +5 V (10 Vpp). The jacks are also normalled such that a single mono source in the left jack is simply copied to the right.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAlternatively, two discrete mono sources can also share a channel by configuring the two rear jumpers on the back of the module of the corresponding channel. In the default \u003cspan\u003eSTEREO\u003c\/span\u003e configuration, the two inputs are positioned hard left and hard right. With the jumpers in the \u003cspan\u003eDUAL-MONO\u003c\/span\u003e position, the channel input signals are mixed together and positioned in stereo center. Signals that do not need stereo panning can then be doubled-up on a single channel, such as kick and snare drum, two different bass sounds, etc. This allows Xi3 to handle up to six independent mono sources in a compact footprint.\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003eChannel Controls\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe \u003cspan\u003eVOL\u003c\/span\u003e parameter adjusts the channel volume with a linear response for smooth fade ins and outs. The jack directly below each pair of audio inputs is the channel’s volume CV input, which allows for external voltage control within a range of 0 to +5V. This voltage input is biased by the \u003cspan\u003eVOL\u003c\/span\u003e knob position (summed). The brightness of the adjacent white \u003cspan\u003eLED\u003c\/span\u003e indicates the channel volume level and any incoming CV.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe channel’s other two knobs, \u003cspan\u003eFX1\u003c\/span\u003e and \u003cspan\u003eFX2\u003c\/span\u003e, are independent stereo effects sends. Using these parameters, an adjustable amount of the channel signal can be sent to Xcelon’s two shared effects busses FX SND 1 and FX SND 2, which are commonly used for time-based effects such as delay and reverb. On Xi3, both \u003cspan\u003eFX1\u003c\/span\u003e and \u003cspan\u003eFX2\u003c\/span\u003e are post-fader sends, meaning the amount of sent signal is also affected by the channel’s volume position.\u003c\/p\u003e\n\u003cdiv class=\"s_alert s_alert_md alert alert-info w-100 clearfix\" data-name=\"Alert\" data-snippet=\"s_alert\"\u003e\n\u003cdiv class=\"s_alert_content\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan class=\"text-o-color-5\"\u003eUnlike the main mixer channels, FX1 and FX2 send levels are manual only and do not have CV inputs.\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe \u003cspan\u003eAB\u003c\/span\u003e switch assigns the channel output to one or both of Xcelon’s main output mix busses. In the leftmost and rightmost positions, the channel is routed to only one of the two busses, either \u003cspan\u003eA\u003c\/span\u003e or \u003cspan\u003eB\u003c\/span\u003e. In the middle position, the channel is routed to both simultaneously, allowing for parallel processing, AFL monitoring (after fade listen), and other creative uses.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eExpanded Mixing Applications\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn addition to general channel expansion, Xi3 is ideal for inputs that do not require frequent hands-on control but remain an important part of the mix. These may include more advanced FX returns, where processed signals are sent back into the mix and rerouted back to the FX busses to create feedback effects or feed into other effect chains for complex textures.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eXi3 is also well suited for integrating stereo submixes, such as a drum submix from another mixer, or parallel processed signals returning from other modules. For example, signals tapped and sent out through the IO module for processing can be returned to Xi3 as stereo channels, with control over volume, stereo routing, and FX sends.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBy handling these types of sources, Xi3 makes it easy to integrate supporting elements and processed layers without using full-featured mixer channels.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eDirect Outputs\u003c\/h3\u003e\n\u003cp\u003eJust like the main Xcelon mixer and XP3 expander, Xi3 is equipped with direct output ports to access individual channel signals for multi-track recording and other routing. Its bank of three stereo channels has two direct output ports, \u003cspan\u003ePRE\u003c\/span\u003e and \u003cspan\u003ePOST\u003c\/span\u003e, to tap the channel signals either before or after the volume control.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese groupings of six signals are connected using an 8-pin cable to the optional direct output modules– IO, TRS and DB25 for balanced line outputs, and the CUE module for PFL monitoring. They can be mixed and matched in any order, and both the \u003cspan\u003ePRE\u003c\/span\u003e and \u003cspan\u003ePOST\u003c\/span\u003e direct outputs for a bank of channels can be used simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"o_card_img img img-fluid o_we_custom_image rounded-start\" data-mimetype=\"image\/webp\" data-mimetype-before-conversion=\"image\/png\" data-original-id=\"2920\" data-original-src=\"\/web\/image\/2920-b1c762f6\/Boredbrain_DMA_modules.png\" data-resize-width=\"512\" src=\"https:\/\/www.boredbrainmusic.com\/web\/image\/2921-0f869b3c\/Boredbrain_DMA_modules.webp?access_token=0c442617-5b7e-4d3d-8727-a8896fe2fdda\"\u003e\u003c\/p\u003e\n\u003ch3\u003eJumper Settings\u003c\/h3\u003e\n\u003cp\u003eEach channel has a custom jumper setting found on the back of the module.\u003c\/p\u003e\n\u003cdiv class=\"o_text_columns\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"col-4 o_colored_level d-lg-block d-none o_snippet_mobile_invisible col-lg-6\" data-invisible=\"1\"\u003e\n\u003cdiv class=\"s_text_highlight o_colored_level my-3 w-100 oe_snippet_body text-center o_cc o_cc2\" data-name=\"Text Highlight\" data-snippet=\"s_text_highlight\"\u003e\n\u003cdiv class=\"container\"\u003e\n\u003ch5\u003e\n\u003cspan\u003eINPUT \u003c\/span\u003e- 2 jumpers\u003c\/h5\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ctable class=\"table table-bordered o_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eSTEREO\u003cbr\u003e\u003c\/span\u003e(default)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStereo left and right input (panned left and right)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003eDUAL-MONO\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eTwo discrete mono inputs (mixed and panned center)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eBecause a channel’s two inputs share a volume parameter, signal balance in dual-mono mode must be adjusted prior to Xi3 input.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv class=\"container\"\u003e\n\u003ch4\u003e\u003cspan class=\"text-o-color-1\"\u003eSPECIFICATIONS\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003eAudio Inputs:\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e 6 x 3.5 mm jacks (3 stereo pairs)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003eCV Inputs:\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e 3 x 3.5 mm jacks (0 to +5 V)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003eInput Impedance:\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e 47 kΩ\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003eWidth:\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e 8 HP\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003eDepth:\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e 1.5 in (38 mm)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003eWeight:\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e 4.4 oz (125 g)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003e\u003cspan\u003ePower:\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"o_small-fs\"\u003e+12 V 55 mA, -12 V 50 mA\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"o_small-fs\"\u003e​\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" class=\"img img-fluid o_we_custom_image mx-auto d-block\" data-mimetype=\"image\/webp\" data-mimetype-before-conversion=\"image\/png\" data-original-id=\"14081\" data-original-src=\"\/web\/image\/14081-a0cdb15b\/Xi3_panel_Wireframe_v1.0.png\" data-resize-width=\"175\" src=\"https:\/\/www.boredbrainmusic.com\/web\/image\/14083-5fefb22d\/Xi3_panel_Wireframe_v1.0.webp?access_token=c39020f1-851f-4ba8-819d-f3a127de0d4c\"\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s_text_highlight o_colored_level my-3 w-100 oe_snippet_body o_cc o_cc2 text-start\" data-name=\"Text Highlight\" data-snippet=\"s_text_highlight\"\u003e \u003ca href=\"https:\/\/www.boredbrainmusic.com\/shop\/xcelon-xi3-4250\/document\/198\" target=\"_self\"\u003e Xi3-UserGuide_1.0.pdf\u003c\/a\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s_text_highlight o_colored_level my-3 w-100 oe_snippet_body o_cc o_cc2 text-start\" data-name=\"Text Highlight\" data-snippet=\"s_text_highlight\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"s_text_highlight o_colored_level my-3 w-100 oe_snippet_body o_cc o_cc2 text-start\" data-name=\"Text Highlight\" data-snippet=\"s_text_highlight\"\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv class=\"row s_nb_column_fixed\"\u003e\n\u003cdiv class=\"o_masonry_col o_snippet_not_selectable col-lg-4\"\u003e\n\u003cdiv class=\"d-block media_iframe_video\" data-oe-expression=\"\/\/www.youtube.com\/embed\/M7wLSPBYNPA?rel=0\u0026amp;autoplay=0\"\u003e\n\u003cbr class=\"Apple-interchange-newline\"\u003e\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" height=\"240\" src=\"https:\/\/www.youtube.com\/embed\/M7wLSPBYNPA?rel=0\u0026amp;autoplay=0\" width=\"320\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"o_masonry_col o_snippet_not_selectable col-lg-4\"\u003e\n\u003cdiv class=\"d-block media_iframe_video\" data-oe-expression=\"\/\/www.youtube.com\/embed\/JrtEmwswbVI?rel=0\u0026amp;autoplay=0\"\u003e\n\u003cdiv class=\"media_iframe_video_size\"\u003e \u003c\/div\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" height=\"240\" src=\"https:\/\/www.youtube.com\/embed\/JrtEmwswbVI?rel=0\u0026amp;autoplay=0\" width=\"320\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"o_masonry_col o_snippet_not_selectable col-lg-4\"\u003e\n\u003cdiv class=\"d-block media_iframe_video\" data-oe-expression=\"\/\/www.youtube.com\/embed\/E5iuBqSPk7k?rel=0\u0026amp;autoplay=0\"\u003e\n\u003cdiv class=\"media_iframe_video_size\"\u003e \u003c\/div\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" height=\"240\" src=\"https:\/\/www.youtube.com\/embed\/E5iuBqSPk7k?rel=0\u0026amp;autoplay=0\" width=\"320\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s_allow_columns container\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"s_text_highlight o_colored_level my-3 w-100 oe_snippet_body o_cc o_cc2 text-start\" data-name=\"Text Highlight\" data-snippet=\"s_text_highlight\"\u003e \u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Boredbrain","offers":[{"title":"Default Title","offer_id":51570036080918,"sku":null,"price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/BB-XI3_Xcelon_Xi3__67468.1750980605.1280.1280.jpg?v=1784248977"}],"url":"https:\/\/boutiquepedalnyc.us\/collections\/expander.oembed","provider":"BPNYC","version":"1.0","type":"link"}