{"title":"Eurorack Clock Generator","description":"","products":[{"product_id":"rossum-panharmonium-spectral-processor-and-tone-generator","title":"Rossum Panharmonium - Spectral Processor and Tone Generator","description":"\u003cp\u003e\u003cstrong\u003eSpectral Processor and Tone Generator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRossum Electro-Music Software Architect \u003cstrong\u003eBob Bliss\u003c\/strong\u003e (who also, as it happens, fathered E-mu’s famed “EOS” Emulator Operating System) has created \u003cstrong\u003ePanharmonium\u003c\/strong\u003e, a unique music and sound design tool that lets you analyze the spectral content of any audio signal and use that analysis to drive a bank of from 1 to 33 oscillators. Depending on various control settings, Panharmonium can accurately reproduce the input spectrum in real time or modify it in a multitude of wildly creative ways. All with an interface whose immediacy encourages performance and interaction.\u003c\/p\u003e\n\u003cp\u003ePanharmonium input can be anything from a single oscillator to an entire mix (including vocals). From dense, swirling pads and drones that evolve with the input’s changing spectrum, to clock-syncable spectral arpeggiation, to as-yet unnamed harmonic effects, Panharmonium opens up an entirely new world of sonic possibilities.\u003c\/p\u003e\n\u003cp\u003eAdditionally, Panharmonium can take a snapshot of an instantaneous spectrum and use that as a complex harmonic oscillator, which can then be modified and modulated by all of Panharmonium’s other controls. \u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePanharmonium accomplishes its magic though a combination of functional submodules:\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpectral Analyzer\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Spectral Analyzer provides tools for defining the analysis process.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eSlice\u003c\/strong\u003e parameter sets the rate at which the incoming audio is transformed to spectral data. It can be set by the \u003cstrong\u003eSlice\u003c\/strong\u003e and \u003cstrong\u003eMultiplier\u003c\/strong\u003e controls, the \u003cstrong\u003eTap\u003c\/strong\u003e button, or by an external clock signal. Very short slice times result in real-time spectral data, while longer times can create rhythmic spectral patterns.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eCenter Freq\u003c\/strong\u003e and \u003cstrong\u003eBandwidth\u003c\/strong\u003e controls (and associated CV inputs and attenuverters) control the range of frequencies to be analyzed. The \u003cstrong\u003eBandwidth\u003c\/strong\u003e control allows the selection of narrow to wide pass bands on the left side of the pot and narrow to wide notches on the right side of the pot. The ability to sweep the frequency and modify the bandwidth under CV control opens up a wide range of sonic effects.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eFreeze\u003c\/strong\u003e button lets you freeze the spectral integrator, sustaining the currently analyzed spectrum.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpectral Modifiers\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese controls allow you to creatively modify the analyzed spectra.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eVoice\u003c\/strong\u003e parameter lets you select from 1 to 33 oscillators to resynthesize the spectrum.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eBlur\u003c\/strong\u003e parameter (and associated CV input) is a spectral lag processor that controls how quickly the spectrum can change. \u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eFeedback\u003c\/strong\u003e control lets you route the resynthesized audio back into the entire processing chain for subtle or dramatic feedback effects. At its max, the output becomes self-sustaining, even if the input is removed.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOscillator Bank\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Oscillator Bank resynthesizes the analyzed spectra.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eWaveform\u003c\/strong\u003e parameter selects the oscillators’ waveform. In addition to the usual sine, triangle, sawtooth and pulse waveforms, two special crossfading sine and sawtooth waveforms are included.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eFreq\u003c\/strong\u003e control lets you tune the oscillators over a +\/-7 semitone range. The frequency is further controlled by the 1V\/Oct input and the FM input and attenuverter.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eOctave\u003c\/strong\u003e control, not surprisingly, shifts the pitch of the output by octaves.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eGlide\u003c\/strong\u003e parameter sets the amount of polyphonic glide (i.e., each oscillator has its own glide circuit).\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eMix\u003c\/strong\u003e control\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e(and associated CV input) sets the balance between the original input audio and the resynthesized audio.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOptional Functions\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA number of optional functions can be selected by using the \u003cstrong\u003eOutput Mode\u003c\/strong\u003e and \u003cstrong\u003eTap\u003c\/strong\u003e buttons.\u003c\/p\u003e\n\u003cp\u003e– Holding the\u003cstrong\u003e Output Mode\u003c\/strong\u003e button and adjusting the \u003cstrong\u003eSlice\u003c\/strong\u003e control enables \u003cstrong\u003eDrums Mode\u003c\/strong\u003e, which optimizes the spectral analysis for drums and other percussive inputs.\u003c\/p\u003e\n\u003cp\u003e– Holding the \u003cstrong\u003eOutput Mode\u003c\/strong\u003e button and adjusting the \u003cstrong\u003eFreq\u003c\/strong\u003e control enables \u003cstrong\u003eSpectral Warping\u003c\/strong\u003e. In contrast to conventional frequency adjustment, where the harmonic relationships between the spectral elements are preserved, \u003cstrong\u003eSpectral\u003c\/strong\u003e \u003cstrong\u003eWarping\u003c\/strong\u003e shifts the harmonic elements individually, producing a variety of clangorous, swarming textures.\u003c\/p\u003e\n\u003cp\u003e– Holding the \u003cstrong\u003eTap\u003c\/strong\u003e button and adjusting the \u003cstrong\u003eFreq\u003c\/strong\u003e control quantizes the resulting frequency adjustments to semitones.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSpectra Memories and Presets\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePanharmonium provides 12 user \u003cstrong\u003eSpectra\u003c\/strong\u003e memories and 12 user \u003cstrong\u003ePresets\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e– The \u003cstrong\u003eSpectra\u003c\/strong\u003e memories let you store up to 12 frozen slices. When selected, a spectrum (up to 33 oscillators wide!) replaces any live input and can have its pitch controlled by the 1V\/Oct input and FM controls.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e– A \u003cstrong\u003ePreset\u003c\/strong\u003e is a snapshot of all of the module settings, along with the value of any CVs present at the moment the preset is saved.\u003c\/p\u003e\n\u003cp\u003ePanharmonium\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eis \u003cstrong\u003e26HP wide\u003c\/strong\u003e and \u003cstrong\u003e25mm deep\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003ePower requirements (max):\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003e\u003cstrong\u003e140mA +12V\u003c\/strong\u003e, \u003cstrong\u003e30mA -12V\u003c\/strong\u003e. Reverse polarity protected.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.rossum-electro.com\/fqlzron\/wp-content\/uploads\/2019\/06\/Panharm_QSG_061219.pdf\"\u003ePanharmonium Quick Start Guide\u003c\/a\u003e (PDF)\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.rossum-electro.com\/fqlzron\/wp-content\/uploads\/2019\/07\/Panharm_manual_070419.pdf\"\u003ePanharmonium Manual\u003c\/a\u003e (PDF)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Rossum Electro-Music","offers":[{"title":"Black SOLD OUT","offer_id":51569939874070,"sku":null,"price":599.0,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":51569939906838,"sku":null,"price":599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/panharmonium_blk__81731.1712883490.1280.1280.jpg?v=1784244303"},{"product_id":"qu-bit-electronix-bloom-fractal-sequencer","title":"Qu-Bit Electronix BLOOM -fractal sequencer","description":"\u003ch1 class=\"productView-title\"\u003eQu-Bit Electronix BLOOM -fractal sequencer\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBloom is a fractal sequencer capable of generating infinitely evolving melodies with a host of musical features.\u003c\/p\u003e\n\u003cp\u003eAt its core is a powerful 32 step sequencer with two independent channels and an intuitive interface. What makes the Bloom come alive are its fractal algorithms which can transform existing sequences into powerful melodies, or even generate new patterns altogether. The base sequence is known as the Trunk and can be programmed by hand, or automatically generated with the Mutate function. Once a Trunk sequence is in place, fractal transformations are only a knob turn away by using the Branch and path controls. Each new Branch adds a complete variation to the base sequence and Path determines its passage through the set of recursively generated sub-sequences, offering a unique take on the melody with each turn of the knob.\u003c\/p\u003e\n\u003cp\u003eBring your sequencing to life with Bloom.\u003c\/p\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003eFractal sequencer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003eInfinitely evolving melodies\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003eTwo independent channels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003e32 steps per channel for base sequence, 256 steps for generated sequences\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003eRatchets, per step slew, quantized output, and transpose control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul data-rte-list=\"default\"\u003e\n\u003cli\u003e\n\u003cp\u003e8 pattern locations w\/ save, load, copy, and erase functionality\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.qubitelectronix.com\/s\/QB_Bloom.pdf\" target=\"_blank\"\u003eDownload the Bloom Manual here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWidth: 16HP\u003c\/p\u003e\n\u003cp\u003eDepth: 23mm\u003c\/p\u003e\n\u003cp\u003ePower: +12V: 82mA, -12V: 0mA\u003c\/p\u003e","brand":"Qu-Bit Electronix","offers":[{"title":"Silver pre-order","offer_id":51569944723734,"sku":null,"price":399.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":51569944756502,"sku":null,"price":399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_20__92180.1614999898.1280.1280.jpg?v=1785276183"},{"product_id":"intellijel-quadrax","title":"Intellijel Quadrax Pre-Order","description":"\u003cp\u003e\u003cspan\u003eWhether you are exploring the unique channel functions, CV modulation matrix or chaining options, it is quickly apparent that there are infinite possibilities to explore. This powerful and tactile modulation generator will quickly become the beating heart of your modular system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Intellijel Quadrax consists of four independent, CV-controllable channels, each of which can be configured to perform any one of the following functions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ean AD (Attack, Decay) envelope\u003c\/li\u003e\n\u003cli\u003ean AHR (Attack, Hold, Release) envelope\u003c\/li\u003e\n\u003cli\u003ea cycling envelope (resulting in a unipolar LFO)\u003c\/li\u003e\n\u003cli\u003ea pulse burst generator (Finite repeated functions that ascend or descend in amplitude)\u003c\/li\u003e\n\u003cli\u003ea morphing, bipolar beat syncable LFO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe envelopes all feature a continuously variable response curve, ranging from logarithmic through linear to exponential, and each stage can be as snappy as 0.3 ms to as lengthy as 20 seconds. Adjusting the curve time will not affect your overall envelope length. Each of the main modes have an alternate—the envelopes allow you to mirror the rising curve shape on the fall stage.\u003c\/p\u003e\n\u003cp\u003eWhen set to Burst mode, the channel generates a rising or falling burst of pulses, with full control over the length of the pulse burst, the number and shape of the bursts within it, and whether the bursts increase or decrease in amplitude over the burst. When in alternate mode, the shape of the bursts changes from a morphing square\/sine into a tilting saw that matches your amplitude shape.\u003c\/p\u003e\n\u003cp\u003eAD, AHR, Cycling and Burst modes all feature a user-selectable maximum output level of either 10V or 5V.\u003c\/p\u003e\n\u003cp\u003eLFO mode offers control over the frequency and waveshape, while providing a unique morphing feature that creates numerous variations of the selected waveshape. LFOs can be either free-running or beat-synchronized using the channel’s TRIG input. When set to alternate mode, it becomes a LFV (Low Frequency Vacillator) integrating the same syncing features of the LFO into a random voltage source that rises and falls on its own whims, you control the range of it’s changes and filter\/slew its output with the panel controls.\u003c\/p\u003e\n\u003cp\u003eChannels can be chained together to create complex multi-stage envelopes, with each channel triggered by the previous channel’s trigger input, end-of-rise, or end-of-fall. This enables multiple function generators to fire simultaneously, or it enables the creation of complex multi-stage envelopes by allowing the linked function to fire either at the end of the previous function’s rise time, or at the end of its fall time.\u003c\/p\u003e\n\u003cp\u003eFour freely-assignable, step-attenuverted CV inputs are capable of modulating any or all of the various parameters across all four channels using the built-in CV matrix, and built-in attenuversion for each assignment.\u003c\/p\u003e\n\u003cp\u003eQuadrax remembers its current state (Mode and CV assignments, channel links, etc) and retains that state even if power is removed, meaning Quadrax will always turn on in exactly the same state as you last left it.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe allowfullscreen=\"\" frameborder=\"0\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/y5qoJd9YKmc\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs + Downloads\u003c\/h2\u003e\n\u003cdiv class=\"intellijel-meta columns\"\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-width\"\u003e\n\u003cth colspan=\"2\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e14HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-depth\"\u003e\n\u003cth colspan=\"2\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e38mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-power\"\u003e\n\u003cth colspan=\"2\"\u003ePower\u003c\/th\u003e\n\u003ctd\u003e106mA @ +12V\u003cbr\u003e9mA @ -12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-manual\"\u003e\n\u003cth colspan=\"2\"\u003eManual\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/manuals\/quadrax_manual_1.1_2020.03.24.pdf\"\u003eManual\u003c\/a\u003e (1.1 \/ 2020.03.24)\u003cbr\u003e\u003ca href=\"https:\/\/intellijel.com\/downloads\/manuals\/quadrax_manual_1.0_2019.11.05.pdf\"\u003eManual\u003c\/a\u003e (1.0 \/ 2019.11.05)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-firmware\"\u003e\n\u003cth colspan=\"2\"\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel_Firmware_Updater_MacOS_2020-03-27.zip\"\u003eMac\u003c\/a\u003e \/ \u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel_Firmware_Updater_Windows_2020-03-27.zip\"\u003eWin\u003c\/a\u003e (1.1.3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":51569950851350,"sku":null,"price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/White_Base_3_3__75684.1585784633.1280.1280.jpg?v=1785048550"},{"product_id":"intellijel-metropolix-multitrack-performance-oriented-pitch-gate-and-mod-sequencer","title":"Intellijel Metropolix - PRE-ORDER","description":"\u003cp\u003eThe Intellijel Metropolix is a unique and powerful multitrack Eurorack musical sequencer. With an abundance of hands-on, tactile controls and a wealth of modulation possibilities (both internal and external) you can quickly and easily create infectiously musical sequences that are never boring. Even the simplest melody can be brought to life with seemingly endless options to create variations or real-time manipulations.\u003c\/p\u003e\n\u003cp\u003eIn the studio or in a live performance, the Metropolix is sure to become a staple source of fresh ideas and killer riffs in your creative process.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003ePerformance Controls\u003c\/h2\u003e\n\u003cp\u003eMetropolix is an interactive sequencer optimized for live performance, jamming, and improvisation — with configurable, hands-on control of all the most essential performance parameters. Sequences transform and mutate with just the twist of a knob; a flick of a switch; a nudge of a slider; or an injection of CV. With Metropolix, your music is as dynamic and evolving as your imagination.\u003c\/p\u003e\n\u003ch2\u003eTwo Tracks, Interconnected\u003c\/h2\u003e\n\u003cp\u003eTwo tracks (TRK 1 and TRK 2) are variants of a master pitch\/gate sequencer, which is programmed via the PITCH sliders, PULSE COUNT and GATE TYPE switches. Each track interprets the master sequence in a variety of ways — creating complementary variations that enable you to generate counterpoint, polyrhythms, and all manner of sonic movement (both subtle and extreme).\u003c\/p\u003e\n\u003cp\u003eEach of these tracks has its own playback ORDER, sequence LENgth, clock DIVision, SWING amount, SLIDE time, and track GATE lengths. Other track-based sequence variables are accessible from the TRACK MENU, and include Pitch Slider inversion; sequence note range; track transposition; and more. In addition, both tracks have multiple lanes of per-stage playback parameters, including: GATE override; PITCH override; RATCHet count; PROBability of playback; ACCUMulating transposition, and a dedicated CV lane. Each stage also has a SKIP feature, and a pitch SLIDE option.\u003c\/p\u003e\n\u003ch2\u003eEight Modulation Lanes\u003c\/h2\u003e\n\u003cp\u003eEight Separate modulation lanes are accessed via the MOD button. Each MOD lane has 8-stages of modulation values and its own playback ORDER, LENgth, and clock DIVision; and each lane is routable to one of Metropolix’ two assignable outputs or to dozens of internal destinations, allowing for sophisticated and powerful self-modulation.\u003c\/p\u003e\n\u003ch2\u003eThree AUX Inputs and Two CTRL Knobs\u003c\/h2\u003e\n\u003cp\u003eA trio of AUX inputs allows for external modulation of user-assignable sequencer parameters for even greater variation, while two assignable CTRL knobs give you direct access to the parameters you want to adjust most frequently during a performance. With dedicated Pitch\/Gate outputs for both Track 1 and Track 2; two totally user-assignable outputs (A and B); and internal MOD routing, Metropolix features a wealth of patching opportunities.\u003c\/p\u003e\n\u003ch2\u003eLoopy — Performance Looping\u003c\/h2\u003e\n\u003cp\u003eMetropolix also features a Loopy mode, allowing you to instantly play back short sub-sequences, or even “play” the stage buttons directly (like a ‘keyboard’).\u003c\/p\u003e\n\u003ch2\u003e64 Total Recall Presets\u003c\/h2\u003e\n\u003cp\u003eMetropolix stores up to 64 preset configurations (in 8 banks of 8 presets), and all live settings are stored in EPROM, ensuring that your Metropolix will always power up exactly as you left it — even if you haven’t saved them to a preset. By default presets can change all the structural (menu-based) elements of your sequencer without overwriting the front panel controls, but full recall is also available.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eGx — Gate Expander\u003c\/h2\u003e\n\u003cp\u003eUse the optional Gx module to add individual outputs for 8 additional, configurable gate outputs.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecs + Downloads\u003c\/h2\u003e\n\u003cdiv class=\"intellijel-meta columns\"\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-width\"\u003e\n\u003cth colspan=\"2\"\u003eWidth\u003c\/th\u003e\n\u003ctd\u003e34HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-depth\"\u003e\n\u003cth colspan=\"2\"\u003eDepth\u003c\/th\u003e\n\u003ctd\u003e25mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-power\"\u003e\n\u003cth colspan=\"2\"\u003ePower\u003c\/th\u003e\n\u003ctd\u003e95mA @ +12V\u003cbr\u003e10mA @ -12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ctable class=\"intellijel-meta-table\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"intellijel-meta-manual\"\u003e\n\u003cth colspan=\"2\"\u003eManual\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/manuals\/metropolix_manual_v1.0.1_2021.03.04.pdf\"\u003eManual\u003c\/a\u003e (v1.0.1 \/ 2021.03.04)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-firmware\"\u003e\n\u003cth colspan=\"2\"\u003eFirmware\u003c\/th\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel_Firmware_Updater_macOS_2021-03-05.zip\"\u003eMac\u003c\/a\u003e \/ \u003ca href=\"https:\/\/intellijel.com\/downloads\/firmware\/Intellijel_Firmware_Updater_Windows_2021-03-05.zip\"\u003eWin\u003c\/a\u003e (1.0.1.0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr class=\"intellijel-meta-modulargrid\"\u003e\n\u003cth colspan=\"2\"\u003eModularGrid\u003c\/th\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/www.modulargrid.net\/e\/intellijel-metropolix\" target=\"_blank\"\u003eModularGrid\u003c\/a\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e","brand":"Intellijel","offers":[{"title":"Default Title","offer_id":51569976803606,"sku":null,"price":579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Metropolix__03019.1615159978.1280.1280.jpg?v=1785050648"},{"product_id":"buchla-tiptop-audio-sequential-voltage-source-model-245t","title":"Buchla \u0026 Tiptop Audio Sequential Voltage Source Model 245t","description":"\u003ch5 class=\"aux-modern-heading-secondary\"\u003e\u003cspan class=\"aux-head-before\"\u003eBuchla 245t has two sections: Pulser and Stored Voltage Stages.\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan class=\"aux-head-before\"\u003e\u003cstrong\u003eThe Pulser\u003c\/strong\u003e generates a control pulse which can be used to advance the stages in the Voltage Stage section.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"aux-head-before\"\u003e\u003cstrong\u003eThe Voltage Stage\u003c\/strong\u003e section has 5 stages that store 4 voltages per stage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePulser Section:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePulse\u003c\/strong\u003e - output generates a pulse with a 10V initial stage that lasts for 100uSec (0.1ms) followed by a 5V gate stage length determined by the Pulse Length control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRef\u003c\/strong\u003e - outputs a ramp wave that descends from 10V to 0V at the rate of the pulser.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePulse Length\u003c\/strong\u003e - sets the length of the 5V stage of the pulse from 0 to 100% of the duty cycle. External CV control is added to the knob setting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInternal Time\u003c\/strong\u003e - controls the period of the pulser output from 10 seconds (full CW) to a few milliseconds (full CCW). External CV has an attenuverted control to either add (CW) or subtract (CCW) external voltage from the knob setting. External CV can increase the maximum and minimum period of the pulser to approximately 50 seconds to 1ms (1kHz) (*).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStart\u003c\/strong\u003e - Pressing this button starts generating a pulse and reference ramp at those outputs. A pulse on the Start input also begins pulser generation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStop\u003c\/strong\u003e - Pressing the button or sending a pulse to the input jack stops the pulser if already running. Additional presses or pulses to the Stop input will manually trigger a single pulse output from the pulser.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStored Voltage Stages:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvance In\u003c\/strong\u003e - accepts a pulse from the Pulser or external source (281t EOC for example) and each pulse advances to the next stage from 1 to 5. The switches in the Stage Select section can control the number of stages played back.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003eNote, with all stage switches in down position playback will be on hold.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eStage Gate Output\u003c\/strong\u003e - Each stage has a dedicated gate output that OUT produces a high voltage (10V) when that stage is active. This gate can be used to trigger events like envelopes.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eOut\u003c\/strong\u003e - the voltage output of the current active stage.% of Each of0 the period outputs has an independent voltage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eStored Voltages\u003c\/strong\u003e - 4 rows of 5 locations of stored analog voltages set by a control knob.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog (In)\u003c\/strong\u003e - CV input (0-10V) that addresses the stages. When the voltage is above the Off range the Analog input is active and the Advance and Stage Select Inputs are disabled. \u003c\/p\u003e\n\u003cp\u003eRanges are approximately(*): Off (0V - 0.75V), Stage 1 (0.75V - 2.5V) Stage 2 (2.5V to 4.25V) Stage 3 (4.25V to 6V) Stage 4 (6V to 7.75V) Stage 5 (7.75V to 10V)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage Select Inputs\u003c\/strong\u003e - Pulses on these 5 inputs will immediately set the active Stage to the corresponding input. Using these inputs can create a type of analog preset memory for 4 CV settings in your modular system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStage Switches\u003c\/strong\u003e - These 4 switches enable or disable the stage transitions. Switch 1 controls Stage 1 to 2 transition, switch 2 Stage 2 to 3 and so on. By disabling a stage transition the length of the sequence can be shortened or captured.\u003c\/p\u003e\n\u003cp\u003e* Note: due to the analog nature of the design specifications for pulser timing and length and Analog In will slightly vary from unit to unit.\u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cp\u003eRef Out 0 - 10V\u003c\/p\u003e\n\u003cp\u003ePulser Out 0 to 10V\u003c\/p\u003e\n\u003cp\u003ePulse Length CV 0 - 10V\u003c\/p\u003e\n\u003cp\u003eInternal Time CV 0 - 10V\u003c\/p\u003e\n\u003cp\u003eStart Pulse In 0 - 10V\u003c\/p\u003e\n\u003cp\u003eStop Pulse In 0 - 10V\u003c\/p\u003e\n\u003cp\u003eAdvance In 0 - 10V\u003c\/p\u003e\n\u003cp\u003eAnalog In 0 - 10V\u003c\/p\u003e\n\u003cp\u003eStage Select In 0 - 10V\u003c\/p\u003e\n\u003cp\u003eStored Voltage Out 0 - 10V\u003c\/p\u003e\n\u003cp\u003eStage Gate Out 0 - 10V\u003c\/p\u003e\n\u003cp\u003eSize: 30HP - Depth: 25mm\u003c\/p\u003e\n\u003cp\u003ePower: +12V 63mA \/ -12V 28mA\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"aux-head-before\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"aux-head-before\"\u003e\u003cimg alt=\"screen-shot-2022-08-30-at-7.55.06-pm.jpg\" class=\"__mce_add_custom__\" height=\"1362\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/screen-shot-2022-08-30-at-7.55.06-pm.jpg?v=1784246385\" title=\"screen-shot-2022-08-30-at-7.55.06-pm.jpg\" width=\"2492\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Buchla \u0026 Tiptop Audio","offers":[{"title":"Default Title","offer_id":51570001019158,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/245__17890.1661878100.1280.1280.jpg?v=1784787604"},{"product_id":"instru-ceis-2","title":"Instruō cèis 2","description":"\u003cp class=\"p1\"\u003eThe Instruō cèis\u003cspan\u003e[2] \u003c\/span\u003eis a fully analogue voltage-controlled ADSR envelope generator. The ADSR function generator is the model pioneered by the\u003cbr\u003eEast-coast mindset and is extensively used in subtractive synthesis patches. The cèis\u003cspan\u003e[2]\u003c\/span\u003e gives the ability to externally control the attack, decay, sustain, and release stages of the envelope while also emitting trigger and gate signals for each segment, offering maximum versatility from a classic tool.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThis version\u003cspan\u003e[2] \u003c\/span\u003erevision brings additional flexibility and control through a completely redesigned logic extraction circuit for the segment gates,\u003cbr\u003eenvelope re-trigger input, and a precision throughput for voltage-controlled slew limiter capabilities.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003cspan class=\"s1\"\u003e\u003cspan\u003ecèis \u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e| \u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"s1\"\u003esiːs \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e|\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"s2\"\u003e noun \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"s2\"\u003e(envelope)\u003c\/span\u003e\u003c\/span\u003e a containing structure or layer, a curve joining the successive peaks of a modulated wave\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.instruomodular.com\/wp-content\/uploads\/2024\/09\/ceis2-Quickstart-web.pdf\"\u003e\u003cspan\u003eQUICKSTART GUIDE\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.instruomodular.com\/wp-content\/uploads\/2024\/09\/ceis-2-Manual-A5.pdf\"\u003e\u003cspan\u003eMANUAL\u003c\/span\u003e\u003c\/a\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan\u003eSize\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e8HP\u003cbr\u003e\u003cspan class=\"s1\"\u003eDepth: 27mm\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3 class=\"p1\"\u003e\u003cspan\u003ePower\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003cp class=\"p1\"\u003e\u003cspan class=\"s1\"\u003e+12V: 70mA\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"s1\"\u003e–12V: 40mA\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3 class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eFeatures\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003cul\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eLED button for manual control and indication of output CV level\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eFader and CV control over all 4 segments\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eGate output per segment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eLED faders for indicating segment stage when in use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eGate\/Trig modes which can force completion of the Attack duration when triggered\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eHold mode for sustain segment lock for CV slew use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eCombined trigger output which fires when there is a change in segment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"p2\"\u003e\u003cspan class=\"s1\"\u003eVariable envelope response shape from linear to exponential\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003ca href=\"https:\/\/www.instruomodular.com\/wp-content\/uploads\/2019\/10\/ceis-Quickstart-Outlined.pdf\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003e\u003c\/h3\u003e","brand":"Instruō","offers":[{"title":"Default Title","offer_id":51570024087830,"sku":null,"price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/ceis_2__97140.1728950088.1280.1280.jpg?v=1784248159"},{"product_id":"make-noise-multimod","title":"Make Noise  MultiMod","description":"\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWith MultiMod...from one control signal, we create many.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIn a modular synthesizer, it is easy to create complex results via complex means - patching an elaborate network of independent control signals, for example. This can be very powerful but also cumb\u003c\/span\u003e\u003cspan\u003eersome to set up, and potentially difficult to control in a meaningful way. MultiMod represents a new approach: it takes a single control signal and copies it 8 times, not unlike a simple mult, except that it allows you to modify those copies by weighted adjustment of their relative phase and speed. The result is modulation that is related to the source, but not identical at each destination. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePhase\u003c\/span\u003e\u003cspan\u003e sets the spacing of the signal copies in time, weighted by channel, with each progressive channel getting more out of phase from the original signal and from each other. \u003c\/span\u003e\u003cspan\u003eSpread\u003c\/span\u003e\u003cspan\u003e allows for varispeeding the copies by different amounts, with each getting progressively faster or slower than the original Signal. \u003c\/span\u003e\u003cspan\u003eTime\u003c\/span\u003e\u003cspan\u003e determines the range of time captured at the input and therefore also the depth of modulation across copies of the input signal when Phase and Spread are manipulated. MultiMod also includes \u003c\/span\u003e\u003cspan\u003eTempo\u003c\/span\u003e\u003cspan\u003e, \u003c\/span\u003e\u003cspan\u003eHold\u003c\/span\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003cspan\u003eReset\u003c\/span\u003e\u003cspan\u003e features, and a variety of Read Shapes for temporal rearrangement of input signals. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWhen the input is not patched, MultiMod generates an LFO that is copied eight times and manipulated in the same ways. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMultiMod is built with our latest DSP hardware which offers eight high resolution outputs, with signal input and output ranges approaching the upper limits of the analog eurorack modular system. All I\/O is capable of a 20V range at +\/-10V, greatly exceeding the typical 0-5V CV input ranges on typical digital modules. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eGenerate vari-speeded, phase modulated copies of any modulation signal.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDramatically control 8 CVs with just 3 fully modulatable parameters. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMultiple unique read shapes for varying traversal through copied signals\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eTempo\/Reset inputs and Clock output for temporal system integration\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eHold feature for looping captured signals\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUltra-Wide 20V p-p I\/O ranges approach analog maximums of the eurorack system\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFull TechniColor, Maximum Blinkenlights\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCalibrated to accurately pass critical control signals such as quantized pitch CV\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eInternally generated signals for “LFO mode” when nothing is patched to the Signal Input.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWidth: 10hp\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMax depth (incl power cable): 39mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003ePower:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e195mA @+12V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e10mA @-12V \u003c\/span\u003e\u003c\/p\u003e","brand":"MAKE NOISE","offers":[{"title":"Default Title","offer_id":51570026578198,"sku":null,"price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Multimod__31773.1738260289.1280.1280.jpg?v=1784248409"},{"product_id":"buchla-tiptop-audio-programmable-pulser-model-242t","title":"Buchla \u0026 Tiptop Audio Programmable Pulser Model 242t","description":"\u003cp class=\"p1\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cspan\u003eThe 242, was designed in 1970 as an event-based trigger module for CBS.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe lower section features a matrix. Don’s original design used a mechanical pin matrix, but in the 242t, we’ve replaced it with an LED array and X\/Y knobs, reminiscent of those found in vintage electronic games. This modern alternative improves long-term reliability and helps keep the module’s cost reasonable. The upper section includes multiple trigger and gate output combinations and controls. This module revisits early methods of rhythmical generation and introduces Don’s concept of a master clock, the “Pulser”.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe 242t can be externally clocked using the red “clk in” jack. External pulses can also reset the end stage using the red “rst in” jack.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e“ALL OUT” sends out a continuous pulse train no matter what is programmed in the matrix. It is a direct output of the pulser\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e“MATRIX” sends out individual pulse patterns as programmed in the matrix.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe gray jack sends out a continuous ramp wave generated by the pulser, great to send to open a 292t.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e“INPUTS” These top two jacks can receive an external pulse to either start or stop the internal clock.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe “period” section controls the rate\/speed of the internal clock which drives the pulse matrix. \u003c\/p\u003e\n\u003cp class=\"p1\"\u003eIncoming CV to the left hand attenuverter knob can increase or decrease the rate selected by the right hand offset knob.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe offset rate goes from audio rate speed (.002) to 10 seconds (or much longer) per stage.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAbove the matrix are manual stop, single pulse and start buttons.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003ePulses can be programmed using the 4 x 12 matrix.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe “n” row selects the number of consecutive stages for rows A, B and C. Rows A, B and C can independently programmed using the two encoder knobs.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe lower left knob scrolls through the vertical rows, the lower right knob scrolls through the horizontal rows. The on\/off button activates or clears the chosen pulse point and a long press clears the matrix.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eNotes:\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWhen the external clock (Clock In) is active, the “ramp” and \"all out“ outputs remain controlled by the internal clock, as defined in the Period section.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eAt the back of the module, a jumper sets the pulse length: \"Short\" uses the pulser’s brief internal pulse width or the CLK input pulse width, while \"Long\" fixes it to 1 millisecond. The factory default is \"Long,\" recommended for compatibility with most Eurorack modules.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eSize: 16HP - Depth: 45mm - Power: +12V 130mA \/ -12V 19mA\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cimg alt=\"screenshot-2025-01-29-at-7.30.21-pm.jpg\" class=\"__mce_add_custom__\" height=\"1400\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/screenshot-2025-01-29-at-7.30.21-pm.jpg?v=1784248397\" title=\"screenshot-2025-01-29-at-7.30.21-pm.jpg\" width=\"1260\"\u003e\u003c\/p\u003e","brand":"Buchla \u0026 Tiptop Audio","offers":[{"title":"Default Title","offer_id":51570026610966,"sku":null,"price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/242t__63271.1738208665.1280.1280.jpg?v=1784248417"},{"product_id":"qu-bit-electronix-bloom-v2","title":"Qu-Bit Electronix BLOOM V2 Pre-Order","description":"\u003cdiv class=\"ProductItem-details-excerpt ProductItem-details-excerpt-below-price\" data-content-field=\"excerpt\" id=\"yui_3_17_2_1_1750286345591_165\"\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eInspire new growth in your musical garden with Bloom, a fractal sequencer capable of generating infinitely evolving melodies.\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eIn its latest iteration, Bloom is a powerful 3-channel, 64-step CV and gate sequencer with a plethora of additional features and configurability compared to its predecessor. Apply clock-synced ratchets per step, dial in the Mutation range for random note variation, and even save and recall your Branches with your saved sequence!\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eEach channel now has a new output: Mod! The Mod output is a third, modulation-focused output that stays in sync with your melodic CV and rhythmic Gate outputs. Patch up dubstep-style filter madness, build sequenced amplitude or panning variations into your signal, or send a no-frills LFO that syncs perfectly with your patch!\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eBloom’s roots are grounded in algorithmic variation and probability. Sequences can be dynamically resized and rotated, while notes can receive ornamental musical trills or arpeggios. There are also new probabilistic controls beyond Mutate, including random step muting, ratcheting, and slewing!\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eBloom’s front panel now features a Reseed button, which dice-rolls a whole new sequence for you, as well as a MIDI output that sends all sequence data through a 3.5mm TRS MIDI jack!\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eBeyond the front panel controls, Narwhal brings even greater flexibility to Bloom. Set custom settings, use a full sequence designer interface to import sequences into your Bloom, and so much more.\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003ePlant the seeds of your next patch with Bloom.\u003c\/p\u003e\n\u003cul data-rte-list=\"true\"\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003e3-channel, 64-step-per-channel fractal sequencer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eMod output for sequenced, non-melodic CV modulation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003ePer-step modifiers including ratchets, mutes, slew, trills, and more\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eMIDI out jack to sequence any MIDI-equipped device\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eBased on the Daisy platform\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003e\u003ca href=\"https:\/\/www.qubitelectronix.com\/s\/Bloom-v2-qs-v1-0-3.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDownload the Quickstart Guide.\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003e\u003ca href=\"https:\/\/www.qubitelectronix.com\/s\/Bloom-v2-v1-0-2.pdf\" target=\"_blank\"\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDownload the Manual (v1.0.2)\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eTech Specs\u003c\/p\u003e\n\u003cul data-rte-list=\"true\"\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eWidth: 18HP\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003eDepth: 22mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-rte-preserve-empty=\"true\"\u003ePower Consumption: +12V= 137mA, -12V= 1mA, +5V= 0mA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Qu-Bit Electronix","offers":[{"title":"Default Title","offer_id":51570035851542,"sku":null,"price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/bloom__17102.1750286813.1280.1280.jpg?v=1784248932"}],"url":"https:\/\/boutiquepedalnyc.us\/collections\/clock-generator.oembed","provider":"BPNYC","version":"1.0","type":"link"}