{"title":"Befaco","description":null,"products":[{"product_id":"befaco-stmix","title":"BEFACO STMIX","description":"\u003cp class=\"lead wrap\"\u003e4 channel stereo mixer w\/ aux input\u003c\/p\u003e\n\u003cp\u003eStmix is a compact 4 channel stereo mixer with an Auxilliar input. This input will allow us to chain a few of them or to insert an extra fifth input.\u003cbr\u003eThis module is compatible with our Hexmix system, and can be internally connected to hexmix module to add the output of STMIX to your main mix.\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003cbr\u003e– Four channels stereo inputs with volume control\u003cbr\u003e– Aux input straight to the Mix out\u003cbr\u003e– Level metter LEDs\u003cbr\u003e– Connector in the back to interface with Hexmix module.\u003c\/p\u003e\n\u003cp\u003eSPECS\u003cbr\u003e– Current needs: +12V: 8mA, -12V: 10mA\u003cbr\u003e– Width: 6 HP\u003cbr\u003e– Depth: 20 mm\u003cbr\u003e– Alluminium, heat-treated front panel\u003cbr\u003e– Designed, kits prepared and completed modules assembled in Barcelona\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e8 mA +12V\u003c\/li\u003e\n\u003cli\u003e10 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e20 mm deep\u003c\/li\u003e\n\u003cli\u003e6HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937744150,"sku":null,"price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Blank_1U_6hp_copy_2__49094.1600825473.1280.1280.jpg?v=1784675901"},{"product_id":"befaco-hexpander-hexmix-expander","title":"BEFACO HEXPANDER -Hexmix expander","description":"\u003cp class=\"lead wrap\"\u003eUse it with your Hexmix for more performance!\u003c\/p\u003e\n\u003cp class=\"lead wrap\"\u003eHexmix expander with 3 aux sends, PFL, individual outs per channel and master balanced out\u003c\/p\u003e\n\u003cp\u003eHexpander adds great functionality to Hexmix module. Featuring Three aux send with auxiliary returns, individual outputs for each channel, complete PFL system and balanced output.\u003cbr\u003eHexpander is designed to be placed on top of Hexmix. Expanding eurorack concept to 6u, allow every channel to be aligned as in traditional tabletop mixers.\u003c\/p\u003e\n\u003cp\u003eFor every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.\u003c\/p\u003e\n\u003cp\u003eEvery auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal pre or post fader\/EQ in parallel.\u003cbr\u003eReturns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set properly, for example, either to a guitar pedal or a FX module at synth level.\u003c\/p\u003e\n\u003cp\u003eHexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.\u003cbr\u003eFlip PFL switch to send that channel to the headphones out. With PFL\/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.\u003cbr\u003eLevel meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.\u003c\/p\u003e\n\u003cp\u003eEvery channel has individual 6,5\" jacks out at line level.Here you heve the signal of every channel post EQ.\u003cbr\u003eAs an addition, you have master balanced output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e137 mA +12V\u003c\/li\u003e\n\u003cli\u003e64 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937776918,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_2__97931.1571362604.1280.1280.jpg?v=1785019896"},{"product_id":"befaco-hexmix-6-channel-performance-mixer","title":"BEFACO HEXMIX  - 6-channel performance mixer","description":"\u003cp\u003e*Recommended to use with Hexpander for extra performance!!*\u003c\/p\u003e\n\u003cp\u003eBEFACO HEXMIX - 6channel performance mixer\u003c\/p\u003e\n\u003cp class=\"lead wrap\"\u003e6-channel performance mixer with EQs mutes and Pan\u003c\/p\u003e\n\u003cp\u003eHexmix System is a six channel performance mixer specially designed for Eurorack.\u003c\/p\u003e\n\u003cp\u003eThe system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.\u003c\/p\u003e\n\u003cp\u003eThe mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.\u003c\/p\u003e\n\u003cp\u003eThe unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a convetional tabletop mixing deck.\u003c\/p\u003e\n\u003cp\u003eHEXMIX FEATURES\u003cbr\u003eThis is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.\u003c\/p\u003e\n\u003cp\u003eInputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.\u003c\/p\u003e\n\u003cp\u003eThe signal passes through various process before being sent to the master section. All of this process are located and controlled at each Channel Strip.\u003cbr\u003eThe Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.\u003c\/p\u003e\n\u003cp\u003eMaster section has it’s own EQ and volume control for the mix of all channels. Master EQ is software than individual channel’s and it’s meant to provide control over the final mix.\u003cbr\u003eIt’s possible to change output level from line to synth wit ha switch located in the back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e106 mA +12V\u003c\/li\u003e\n\u003cli\u003e88 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937809686,"sku":null,"price":530.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_1__55225.1571363274.1280.1280.jpg?v=1785019866"},{"product_id":"befaco-hexmix-vca-six-chanel-vca-mixer","title":"BEFACO HexMix VCA - Six chanel VCA \/ Mixer","description":"\u003cp class=\"lead wrap\"\u003eSix chanel VCA \/ Mixer with continuous shape function Log-Lin-expo on a pot.\u003c\/p\u003e\n\u003cp\u003eHex mix VCA is a compact six channel VCA with an unique response curve range from logarythmic to exponential using a pot.\u003cbr\u003eOutput six, act as master and all other outs are normalized to it.\u003cbr\u003eInternal ribbon cable connector to normalize the Six channels directly to the HexMix system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50 mA +12V\u003c\/li\u003e\n\u003cli\u003e50 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e30 mm deep\u003c\/li\u003e\n\u003cli\u003e14HP\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569937842454,"sku":null,"price":340.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_5__60239.1571363736.1280.1280.jpg?v=1785019830"},{"product_id":"befaco-hexmix-hexpander-6ch-performance-mixer-expander","title":"BEFACO HEXMIX \u0026 HEXPANDER - 6CH performance mixer \u0026 expander","description":"\u003cp\u003e\u003cspan\u003eincludes both BEFACO HEXMIX \u0026amp; HEXPANDER\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 6CH performance mixer \u0026amp; expander\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e*Use them together for fun mixing experience for your euerorack system!!!*\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e6-channel performance mixer with EQs mutes and Pan\u003c\/p\u003e\n\u003cp\u003eHexmix System is a six channel performance mixer specially designed for Eurorack.\u003c\/p\u003e\n\u003cp\u003eThe system has two separate modules, the core of the mixer: Hexmix that has six channels with three band EQ, mute, pan and EQ section on the master, and Hexpander that add three auxiliar sends per channel, PFL, individual outs and balanced output.\u003c\/p\u003e\n\u003cp\u003eThe mixer has a strong inspiration in classical DJ mixers, providing sharp EQ’s for enhanced performance, auxilliar send for effects and individual outputs to record your performance per channel.\u003c\/p\u003e\n\u003cp\u003eThe unique Mute Section is a powerful tool for performances, providing a momentary mute function controlled by vactrols and adding a smooth release to the signal decay.\u003c\/p\u003e\n\u003cp\u003eThe system is designed to be placed in 6U, instead of the traditional 3U paradigm in Eurorack. So we will have every feature for each channel vertically as a convetional tabletop mixing deck.\u003c\/p\u003e\n\u003cp\u003eHEXMIX FEATURES\u003cbr\u003eThis is a six channels mixer with three band EQ, vactrol mutes, pan and volume control per channel.\u003c\/p\u003e\n\u003cp\u003eInputs for every channel are located at left side of Hexmix. Each jack is normalized to a VCA Expander connection in the back, so if you have a Hexmix VCA , you will have the output of each VCA to every input. connecting a jack in any input will disconnect whatever is coming from VCA.\u003c\/p\u003e\n\u003cp\u003eThe signal passes through various process before being sent to the master section. All of this process are located and controlled at each Channel Strip.\u003cbr\u003eThe Channel Strip is divided in four basic sections, that will go in the following order: Gain, Mute, EQ and Pan.\u003c\/p\u003e\n\u003cp\u003eMaster section has it’s own EQ and volume control for the mix of all channels. Master EQ is software than individual channel’s and it’s meant to provide control over the final mix.\u003cbr\u003eIt’s possible to change output level from line to synth wit ha switch located in the back.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e106 mA +12V\u003c\/li\u003e\n\u003cli\u003e88 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e-----------------------------------\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eHexmix expander with 3 aux sends, PFL, individual outs per channel and master balanced out\u003c\/p\u003e\n\u003cp\u003eHexpander adds great functionality to Hexmix module. Featuring Three aux send with auxiliary returns, individual outputs for each channel, complete PFL system and balanced output.\u003cbr\u003eHexpander is designed to be placed on top of Hexmix. Expanding eurorack concept to 6u, allow every channel to be aligned as in traditional tabletop mixers.\u003c\/p\u003e\n\u003cp\u003eFor every channel you have three auxiliar sends. One pot will measure the amount of signal sent to each of them.\u003c\/p\u003e\n\u003cp\u003eEvery auxiliar send has a volume pot, that will measure the level of the signal sent. There are two jacks available so it is possible to send the signal pre or post fader\/EQ in parallel.\u003cbr\u003eReturns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set properly, for example, either to a guitar pedal or a FX module at synth level.\u003c\/p\u003e\n\u003cp\u003eHexpander features a complete PFL system, to send channels to the headphones before you add them to main mix.\u003cbr\u003eFlip PFL switch to send that channel to the headphones out. With PFL\/Master Pot you can do a crossfade between the master signal and every channel sent to PFL. Headphones out will control headphones volume.\u003cbr\u003eLevel meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.\u003c\/p\u003e\n\u003cp\u003eEvery channel has individual 6,5\" jacks out at line level.Here you heve the signal of every channel post EQ.\u003cbr\u003eAs an addition, you have master balanced output.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e137 mA +12V\u003c\/li\u003e\n\u003cli\u003e64 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e27 mm deep\u003c\/li\u003e\n\u003cli\u003e28HP\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569943478550,"sku":null,"price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Screen_Shot_2019-08-02_at_14.30.37_3_1_10__66156.1572636726.1280.1280.jpg?v=1784686265"},{"product_id":"befaco-knurlies-100-pack-m3-rack-screws-for-eurorack-cases","title":"Befaco Knurlies 100 pack M3 Rack Screws for Eurorack Cases","description":"\u003cp\u003e\u003cspan\u003ePack of 100 Knurlies Eurorack M3 Rack Screws\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e100 of unique screws designed specifically for Eurorack. These M3 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.  \u003c\/p\u003e\n\u003cp\u003eEach Knurlie comes with a fitted plastic washer to prevent rack rash.\u003c\/p\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569953341718,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Knurlies_M3x100_2022.jpg?v=1785173374"},{"product_id":"befaco-inamp-dual-preamp-module","title":"Befaco InAmp - Dual preamp module","description":"\u003cp\u003eInamp is a dual pre-amp in just 4 HPs. Featuring 6,3 Jacks inputs as well as Minijacks.\u003cbr\u003eBoth inputs are summed so you can use them at the same time as an input mixer.\u003c\/p\u003e\n\u003cp\u003eThe unit is designed to amplify up to x20 the input signal, allowing to amplify most of the music machines out there (Domestic line levels) as well as some guitars (Hum bucket-like pickups and so).\u003c\/p\u003e\n\u003cp\u003eThe first channel is normaled to second one in series, so it’s possible to have two stages of amplification or two separate ones.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e7 mA +12V\u003c\/li\u003e\n\u003cli\u003e3 mA -12V\u003c\/li\u003e\n\u003cli\u003e0 mA 5V\u003c\/li\u003e\n\u003cli\u003e47 mm deep\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569954849046,"sku":null,"price":165.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/20200508_2a822d__17701.1591742776_copy__20059.1595976167.1280.1280.jpg?v=1784686162"},{"product_id":"befaco-cv-thing-cv-to-midi-converter","title":"Befaco CV Thing -CV to MIDI converter","description":"\u003cp\u003e\u003cstrong\u003eINTRODUCTION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCv thing is a fully mapeable CV to MIDI converter in just 6HP. Its based on our VCMC module, but aiming for small and compact performance rigs. It has eight inputs that can be mapped to any MIDI message quite easily thanks to its simple and intuitive user interface. Ccs, Program change ,v\/oct to Note or Clock are some of the messages that can be configured to easily control MIDI gear from your modular rig.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClass-compliant USB MIDI and TRS connectors.\u003c\/li\u003e\n\u003cli\u003eTRS to DIN5 adaptor included.\u003c\/li\u003e\n\u003cli\u003e8 CV inputs.\u003c\/li\u003e\n\u003cli\u003eControls fully mappable to any MIDI message (CC, Notes, Program change, Clock, ST\/SP, NRPN…)\u003c\/li\u003e\n\u003cli\u003eConfigurations saved both in internal memory and via Sysex.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFURTHER INFORMATION\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor further information on this module please refer to the \u003ca href=\"https:\/\/www.befaco.org\/CV_thing\/\"\u003eUser Manual.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor documentation relating to older versions of this module please contact: support@befaco.org\u003c\/p\u003e\n\u003cp\u003eDesigned with love in Barcelona.\u003c\/p\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569959272726,"sku":null,"price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Blank_1U_6hp_copy_3__59543.1602115533.1280.1280.jpg?v=1784788003"},{"product_id":"befaco-knurlies-100-pack-m2-5-rack-screws-for-eurorack-cases","title":"Befaco Knurlies 100 pack M2.5 Rack Screws for Eurorack Cases","description":"\u003cp\u003e\u003cspan\u003ePack of 100 Knurlies Eurorack M2.5 Rack Screws\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e100 of unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.  \u003c\/p\u003e\n\u003cp\u003eEach Knurlie comes with a fitted plastic washer to prevent rack rash.\u003c\/p\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569959469334,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Knurlies_M25x100_2022.jpg?v=1785173438"},{"product_id":"befaco-knurlies-50-pack-m2-5-rack-screws-for-eurorack-cases","title":"Befaco Knurlies 50 pack M2.5 Rack Screws for Eurorack Cases","description":"\u003cp\u003e\u003cspan\u003ePack of 50 Knurlies Eurorack M2.5 Rack Screws\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e50 of  unique screws designed specifically for Eurorack. These M2.5 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.  \u003c\/p\u003e\n\u003cp\u003eEach Knurlie comes with a fitted plastic washer to prevent rack rash.\u003c\/p\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569959600406,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Knurlies_M25x50_2022.jpg?v=1785173407"},{"product_id":"befaco-knurlies-50-pack-m3-rack-screws-for-eurorack-cases","title":"Befaco Knurlies 50 pack M3 Rack Screws for Eurorack Cases","description":"\u003cp\u003e\u003cspan\u003ePack of 50 Knurlies Eurorack M3 Rack Screws\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e50 of  unique screws designed specifically for Eurorack. These M3 screws can be secured by hand, all common screwdrivers and Allen Key. These are great for saving time when rearranging your synth.  \u003c\/p\u003e\n\u003cp\u003eEach Knurlie comes with a fitted plastic washer to prevent rack rash.\u003c\/p\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51569976869142,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/Knurlies_M3x50_2022.jpg?v=1785173347"},{"product_id":"divkid-stereo-strip","title":"Divkid Stereo Strip Pre-Order","description":"\u003cp\u003e\u003cem\u003eStereo Strip \u003c\/em\u003etakes the idea of a channel strip and makes it modular. We hope that by bringing this long-established component of the audio engineering world into the Eurorack environment and by adding CV control over its key parameters that you will find new, creative ways to use it in your patches!\u003c\/p\u003e\n\u003cp\u003eIt features stereo inputs and outputs for audio or CV with EQ, voltage controlled panning, stereo VCA, performable mute and input\/output level switching for Eurorack or line level uses. Abusing the input level switching allows for some musical, modulate-able and highly shapeable distortion sounds too.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStereo Strip \u003c\/em\u003ewas designed to be a creative part of a modular patch. Creating stereo images from mono sources, shaping and modulating existing stereo images, synthesising stereo pseudo ring modulation, sweetening FX with EQ or drastically wave shaping your oscillators, creating send FX routings with benefits or it can simply be used as a channel strip at the end of chain in a patch.\u003c\/p\u003e\n\u003cp\u003eThe addition of line level gain boosting (for the input) or reduction (for the output) allow it to work as a stereo input or output interface for external gear with the advantage of the VCA, panning and the EQ to shape the sound. Experiment with bringing external gear into the Eurorack format and then shape and modulate those sounds them on the way in!\u003c\/p\u003e\n\u003cp\u003eTry patching \u003cem\u003eStereo Strip \u003c\/em\u003eanywhere you would place a VCA in a system and\/or explore its EQ and voltage controlled panning, which are rarer additions to the sound sculpting options for the Eurorack format.\u003c\/p\u003e\n\u003cp\u003eSpecifications\u003cbr\u003e– 6HP\u003cbr\u003e– 33mm deep including power connector\u003cbr\u003e– 63mA +12V and 63mA -12V current draw.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eINTRODUCTION\u003c\/p\u003e\n\u003cp\u003eHello and thank you for purchasing a DivKid Stereo Strip Eurorack module. (Or thank you for your manual reading tendencies if you don’t have the module yet!) Skip back to the annotated image on the previous page for a quick start on the module and read ahead for a more in-depth explanation of the features, functions and behaviours of Stereo Strip.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis manual will outline the functions and controls of the module and will provide some patch examples to get you started.\u003c\/p\u003e\n\u003cp\u003eI’m proud to say that the Stereo Strip module is “powered by Befaco.” It was made in collaboration with them and wouldn’t exist without them.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWHAT IS STEREO STRIP?\u003c\/p\u003e\n\u003cp\u003eStereo Strip is a 6HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning and level control options. Stereo Strip builds on those ideas adding voltage control for increased functionality within the Eurorack modular synthesiser environment.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eStereo Strip can function with mono or stereo inputs applying the following:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• 3 band EQ\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• panning (manual and voltage controlled)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• VCA level control (manual or voltage controlled)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• 3 way performance muting (on-off-momentary)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Soft clipping limiter (distortion!)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e• Line level input and\/or output adjustment\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCONTROLS \u0026amp; FEATURES\u003c\/p\u003e\n\u003cp\u003eINPUTS \u0026amp; OUTPUTS\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAUDIO INPUTS \/\/ Stereo Strip features two inputs for left and right audio signals. The left signal normalises to the right allowing the module to function as a mono input and stereo output module. The module can happily work with line level as well as standard Eurorack levels thanks to the switches on the front panel.\u003c\/p\u003e\n\u003cp\u003eNOTE \/\/ While designed with audio in mind, the Stereo Strip inputs will accept CV, allowing you to use the stereo VCA and panning to modulate the level and routing of your CV signals within a patch.\u003c\/p\u003e\n\u003cp\u003eCV INPUTS \/\/ There are 2 CV inputs for externally modulating the Stereo Strip. The top CV input controls the level of the stereo VCA. When you patch into this input the manual level knob turns into an attenuator for the incoming CV signals. The lower CV input is for the panning which has its own dedicated CV attenuator that determines how much of the external CV mixes into the manual pan control.\u003c\/p\u003e\n\u003cp\u003eOUTPUTS \/\/ The left and right outputs are clearly marked with red bananuts on the output sockets. These can be set to Eurorack or line levels with the output level switch.\u003c\/p\u003e\n\u003cp\u003eNOTE \/\/ As well as processing mono (on the left input) or stereo inputs you can use the module to process two independent mono signals. In that case both audio inputs would share the same control set, but it can be fun to patch left and right as two input streams and patch the left and right outputs as independent mono signal paths.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eCONTROLS\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEQ \/\/ The 3 sliders set the EQ levels. These controls have a centre detent so you can easily place them in the middle with 0dB of EQ adjustment. Pushing the slider up adds level to that EQ band and lowering them from centre will reduce that EQ band.\u003c\/p\u003e\n\u003cp\u003ePAN \/\/ The centre white knob controls the manual panning of the signal. With a mono input it will pan the sound between the left and right outputs. With a stereo input it will adjust the balance of the left and right inputs relative to the outputs.\u003c\/p\u003e\n\u003cp\u003ePAN CV ATTENUATOR \/\/ This knob controls the depth of modulation over the pan. The pan CV is summed with the main pan control and the attenuator enables control over how much external modulation affects the panning.\u003c\/p\u003e\n\u003cp\u003eMUTE \/\/ This is a 3-position mute switch that is on when in the up position, off in the middle position and momentary on when held downwards. This allows for performable muting!\u003c\/p\u003e\n\u003cp\u003eLEVEL \/\/ The bottom knob controls the VCA level. This affects both left and right inputs equally. With no CV present for LVL CV this is a manual control. When you patch into the LVL CV input this becomes an attenuator for the amount of external level modulation.\u003c\/p\u003e\n\u003cp\u003eNOTE \/\/ The level knob and the graphic around the level control allows for easy scaling of levels for a wide range of CV inputs. See notes on behaviour and levels below.\u003c\/p\u003e\n\u003cp\u003eINPUT \u0026amp; OUTPUT LEVEL \/\/ These switches adjust the input levels to deal with Eurorack or line level (switch on the left) and adjust the output from Eurorack levels to line levels (switch on the right).\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBEHAVIOUR \u0026amp; LEVELS\u003c\/p\u003e\n\u003cp\u003eEQ\u003c\/p\u003e\n\u003cp\u003eThe EQ is made up of a low shelf, mid bell curve and high shelf. Each band can cut or boost by ~12dB for drastic and musical shifts in tone while maintaining control for more subtle EQ shifts. The EQ curves vary depending on the level of reduction or boost and feature wide overlapping Q settings for broad adjustments in sound. See the graphic below for an approximate EQ curve, you can see how the EQ responses overlap and vary.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEURORACK OR LINE LEVEL I\/O\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe circle graphics on the panel indicate what level you are set to. The lower larger circle indicates working in the larger voltage ranges and louder levels of the Eurorack domain (for the input or output) and the upper smaller circles indicate working with the lower voltage ranges and quieter levels of line level gear (external hardware, sound cards etc).\u003c\/p\u003e\n\u003cp\u003eThe input switch (left hand one) should be ‘down’ position if you want to use a Eurorack signal as the input and in the ‘up’ position if you want to input a line level signal.\u003c\/p\u003e\n\u003cp\u003eThe output switch (right hand one) should be in the ‘down’ position if you want to output Eurorack levels and in the ‘up’ position if you want to output a line level signal.\u003c\/p\u003e\n\u003cp\u003eThe addition of these switches allows you to use the Stereo Strip as a stereo external interface for soundcards, other hardware and instruments. With the bonus of being an external interface where you can EQ, modulate the level and panning of external signals. The output level selection allows for reducing levels for external gear that can’t handle Eurorack voltages ranges. As an output (like as an input) you gain the addition of the EQ, VCA and panning at your output stage.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eLEVEL KNOB GRAPHICS TO AID GAIN STAGING\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eIn Eurorack there’s no standard range for how much voltage a VCA should need to open a signal from fully closed to fully open. There’s also no standard for what voltage ranges envelopes should occupy and envelopes are the main thing used to control the level of your sounds.\u003c\/p\u003e\n\u003cp\u003eSo what happens if the envelope you want to use peaks at 5V but your VCA needs 10V to open fully … Well best case you’ll have half of your level and it will be quieter (if the VCA is linear) or worse you’ll have a lot less than half of your level (if the VCA is exponential). If you had 10V envelopes but a VCA that needs 5V to open you may clip (nicely or nastily) your VCA or clip the envelope so the VCA just holds until the envelope goes back down below 5V again. Neither of these are ideal!\u003c\/p\u003e\n\u003cp\u003eEnvelopes across the Eurorack format peak at 3 different “standards” 5V, 8V and 10V. The dots on the circular graphic around the level knob show you where to set the level knob (under CV control, from an envelope) to maintain your unity signal levels.\u003c\/p\u003e\n\u003cp\u003eThe VCA in Stereo Strip only needs 5V to open fully, so it can be used most easily, with less external utility modules. If your envelopes are 5V then patch that into the LVL CV and turn the level control up full, to the final dot (going clockwise around the knob). If your envelopes are 8V then turn the level control to the middle of the 3 dots (around 1 o clock on the graphic). Finally if your envelopes are 10V in level then turn the level knob to the first dot half way around the knobs turn.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eNOTE \/\/ You can use a higher voltage envelope or modulation source and turn the knob higher to push into saturation.\u003c\/p\u003e\n\u003cp\u003eBearing in mind that most of us just patch in and have fun, we wanted to add a simple graphic to show how you can make this work for the range of signals you may find in Eurorack for optimal level control.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSOFT CLIPPING, LIMITING \u0026amp; OUTPUT PROTECTION\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe output stage of the Stereo Strip features a soft clipping limiter. This is there to protect the output of the module and any gear it may connect to. This isn’t meant to be an effect at normal operating levels.\u003c\/p\u003e\n\u003cp\u003eHowever you can push the levels to gain some soft clipping and limiting effects which you can abuse for creative and highly shapable distortions! You can also creatively abuse the line level input setting by switching to line level input (for a level boost) but patching in a Eurorack signal. You’ll then have a large gain boost on the way into the module which gives a musical distortion. You can then use the EQ to shape the distortion and modulate the level for a CV controlled saturation effect! When setting the module for distortion this way you can tame the output with the level switch if needed. A patch example for distortion use cases is below.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAUDIO-RATE MODULATION \u0026amp; FREQUENCY LIMITING\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe pan CV input is wide open for a huge range of subsonic, audio range and supersonic modulation signals. You can create some mind bending, ear tingling sounds like your head is inside a stereo ring modulator (best in headphones) with audio-rate tones or have fun with bringing supersonic signals down into the upper human hearing ranges for some aliasing style sound FX. The pan CV also responds to sequencing, random voltages and slower softly swaying modulation for auto-pan FX.\u003c\/p\u003e\n\u003cp\u003eUnlike the pan CV response, the VCA level CV input is restricted in its frequency response in order to give a higher performance with the mute switch. As a result, you may notice that when modulated with an extreme audio-rate signal the overall level decreases. The point at which the level decreases has been fine tuned to allow for lower audio-rate or musical AM synthesis applications while optimising the performance of the mute switch.\u003c\/p\u003e\n\u003cp\u003eNOTE \/\/ As a side note (as this applies to any VCA and not just Stereo Strip) if you use an oscillator as an audio-rate modulator for a standard VCA you will be losing the effect of half of your modulation signal. This is because VCAs respond to positive modulation and not negative modulation. Meaning for standard audio signals (which are bipolar, going both positive and negative) it will half-wave rectify (simply cut off any negative voltage as it won’t respond to it) losing half the modulation signal. You can enable the input boost of the Stereo Strip to bring the level back up.\u003c\/p\u003e\n\u003cp\u003eWith this in mind, I recommend using the pan CV input for audiorate modulation. This allows you to balance your audio-rate modulations on the pan CV attenuator without limiting the frequency of modulation you can apply to the panning. Doing so in mono means you can explore a wider range of AM synthesis and pseudo ring modulation tones, while applying this technique in stereo means you can pan at audio-rates for wild, stereo patch techniques! Have fun!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Divkid","offers":[{"title":"Default Title","offer_id":51569997054230,"sku":null,"price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/stereo_strip__12923.1651080068.1280.1280.jpg?v=1785217126"},{"product_id":"befaco-divkid-output-bus","title":"Befaco\/Divkid OUTPUT BUS Pre-Order","description":"\u003cp\u003e\u003cspan\u003eThe Output Bus is your ultimate output module: Presented by DivKid and Befaco, meant to be the last link in your modular chain!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInspired by pro audio and studio summing units the Output Bus allows for summing style mixing, external gear integration, soft clip limiting, flexible output types, headphone monitoring and level visualization.\u003c\/p\u003e\n\u003cp\u003eThe module works great mixing all your other mixers in your setup, to return mono or stereo FX into the master bus and for bringing in external stereo line level gear with ease. All of this in just 8HP while also being able to visualize your final levels, output appropriate signals on the right cable type and monitor in headphones.\u003c\/p\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSix stereo inputs.\u003c\/li\u003e\n\u003cli\u003eLine\/synth selector in input six.\u003c\/li\u003e\n\u003cli\u003eModular level minijack out.\u003c\/li\u003e\n\u003cli\u003e6,5 mm Jack out.\u003c\/li\u003e\n\u003cli\u003eMinijack and 6,5 mm phones out.\u003c\/li\u003e\n\u003cli\u003eLed Vu-meter.\u003c\/li\u003e\n\u003cli\u003eSoft clipping circuit at main output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent needs: +12V: 70mA, -12V: 68mA\u003c\/li\u003e\n\u003cli\u003eWidth: 8 HP\u003c\/li\u003e\n\u003cli\u003eDepth Assembled Version: 30 mm\u003c\/li\u003e\n\u003cli\u003eDepth DIY Kit Version: 40 mm\u003c\/li\u003e\n\u003cli\u003e300mW Headphone amp (@200\u003cspan\u003eΩ impedance)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e+4dBu Line Out (Impedance Balanced).\u003c\/li\u003e\n\u003cli\u003eDesigned, kits prepared and assembled in Barcelona.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eRESOURCES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/www.befaco.org\/docs\/Output_Bus\/Output_Bus_User_Manual.pdf\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Divkid","offers":[{"title":"Default Title","offer_id":51570018943254,"sku":null,"price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/output_bus__04055.1710799405.1280.1280.jpg?v=1784247698"},{"product_id":"befaco-octaves-vco","title":"Befaco OCTAVES VCO","description":"\u003ch1\u003eOCTAVES VCO\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eA harsh and funky take of an additive Oscillator.\u003c\/span\u003e\u003cbr\u003ePile up multiplications of your frequency to get a lo-fi-retro wall of squared sound!\u003cbr\u003eYou get six doubled frequency pulses, or octaves, with common PWM and volume control for each of them.\u003cbr\u003eThe output of each is cascaded to the next one, so you can either have one output with all frequencies or break the chain and get several sums and modulate each independently!\u003c\/p\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eSix bands, multiple of the base frequency.\u003c\/li\u003e\n\u003cli\u003eSquare wave oscillator with Octaves selector PWM control and sync.\u003c\/li\u003e\n\u003cli\u003eRange control for Tune pot.\u003c\/li\u003e\n\u003cli\u003eVolume CV control and individual output for each band\u003c\/li\u003e\n\u003cli\u003eCascaded summing outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent needs: +12V: 110mA, -12V: 84mA\u003c\/li\u003e\n\u003cli\u003eWidth: 12 HP\u003c\/li\u003e\n\u003cli\u003eDepth: \u003cspan\u003e22mm (assembled and DIY),\u003c\/span\u003e including power connector\u003c\/li\u003e\n\u003cli\u003eAluminium, heat-treated front panel\u003c\/li\u003e\n\u003cli\u003eDesigned, kits prepared and completed modules assembled in Barcelona\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eRESOURCES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.befaco.org\/docs\/Octaves\/Octaves_VCO_User_Manual.pdf\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eUser Manual \u0026gt;\u0026gt;\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"octaves-vco-block-diagram.png\" class=\"__mce_add_custom__\" height=\"1214\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/octaves-vco-block-diagram.png?v=1784247747\" title=\"octaves-vco-block-diagram.png\" width=\"1000\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51570019664150,"sku":null,"price":280.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/octaves_vco__02166.1713382574.1280.1280.jpg?v=1784247760"},{"product_id":"befaco-molten-modular-bypass","title":"Befaco\/Molten Modular BYPASS","description":"\u003ch1 class=\"h1 page-title\"\u003e\u003cspan\u003eMolten Bypass\u003cbr\u003e\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003eThis is Befaco's new collaboration with Robin Vincent aka Molten Music Technology. A Stereo bypass module to gate control the send of your signals to your favorite effect!\u003c\/p\u003e\n\u003cp\u003eMolten bypass features a hard\/soft bypass control, to hard cut the return of your effect or allow the long tails of your reverb to stay after you bypass the effect. Also a gate\/latch control to use either triggers or gates for control and a gain control for the returned signal.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eFull stereo signal path.\u003c\/li\u003e\n\u003cli\u003eDC coupled.\u003c\/li\u003e\n\u003cli\u003eHard or soft bypass selection.\u003c\/li\u003e\n\u003cli\u003eGate or Latch possibility\u003c\/li\u003e\n\u003cli\u003eManual or Gate control\u003c\/li\u003e\n\u003cli\u003eGain control over the return.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent needs: +12V: 33mA, -12: 26mA, 5v:0\u003c\/li\u003e\n\u003cli\u003eWidth: 4 HP\u003c\/li\u003e\n\u003cli\u003eDepth: 42mm (including power connector)\u003c\/li\u003e\n\u003cli\u003eDesigned, kits prepared and  modules assembled in Barcelona.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eRESOURCES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003ca href=\"https:\/\/befaco.org\/docs\/Bypass\/molten-bypass-manual.pdf\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51570024513814,"sku":null,"price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/molten_bypass__54165.1729276923.1280.1280.jpg?v=1784248193"},{"product_id":"befaco-iroi","title":"Befaco IROI Pre-order","description":"\u003ch1\u003eIROI\u003c\/h1\u003e\n\u003cp\u003e\u003cspan class=\"Yjhzub\" data-complete=\"true\" data-processed=\"true\" data-sfc-cb=\"\"\u003eA Shortcut for Atmospheric Processing\u003c\/span\u003e\u003cbr data-complete=\"true\" data-processed=\"true\" data-sfc-cb=\"\" data-sfc-pl=\"|[]\"\u003eIroi is a compact, 18 HP stereo effects powerhouse designed to turn any external signal into a deep, evolving soundscape. It inherits the sophisticated processing chain of its predecessor, Oneiroi. Combines a unique signal chain composed of a multimode filter, a VCA, a unique character resonator, a versatile delay, and an experimental Reverb. The filter – VCA act like a block that can be placed at any point on the signal chain\u003c\/p\u003e\n\u003cdiv class=\"et_pb_with_border et_pb_module et_pb_text et_pb_text_1 et_pb_text_align_center et_pb_bg_layout_dark\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eStereo External input\u003c\/li\u003e\n\u003cli\u003eMultimode filter: low-pass, band-pass, high-pass, and comb filter.\u003c\/li\u003e\n\u003cli\u003e3-band resonator\u003c\/li\u003e\n\u003cli\u003e2-tap echo\u003c\/li\u003e\n\u003cli\u003eReverb with macro control for size, filtering, and direction\u003c\/li\u003e\n\u003cli\u003eCV Control with attenuators on most parameters\u003c\/li\u003e\n\u003cli\u003eVarious types of self-modulation with configurable routing and control over level and speed\u003c\/li\u003e\n\u003cli\u003eExternal synchronization via sync input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_1_3 et_pb_column_3 et_pb_css_mix_blend_mode_passthrough\"\u003e\n\u003cdiv class=\"et_pb_with_border et_pb_module et_pb_text et_pb_text_2 et_pb_text_align_center et_pb_bg_layout_dark\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful randomizer with four different targets with undo\/redo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003eCurrent needs: +12V: 175mA, -12V: 45mA\u003c\/li\u003e\n\u003cli\u003eWidth: 18 HP\u003c\/li\u003e\n\u003cli\u003eDepth: 27 mm (including power connector)\u003c\/li\u003e\n\u003cli\u003eAluminium, Matt Anode front panel\u003c\/li\u003e\n\u003cli\u003eDesigned and assembled in Barcelona\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.befaco.org\/docs\/Iroi\/IROI%20Manual.pdf\" rel=\"noopener\" target=\"_blank\"\u003eUser Manual \u0026gt;\u0026gt;\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51570054693142,"sku":null,"price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/IROI_2__69917.1777681288.1280.1280.jpg?v=1784250203"},{"product_id":"befaco-myler-melodies-random8","title":"Befaco\/Myler melodies RANDOM8 Pre-Order","description":"\u003cp\u003e\u003cspan\u003eRANDOM8 is an eight channel random voltage generator, with dedicated per–channel looping controls, in just 8HP.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt’s our first collaboration with our m8 Mylar Melodies. It is born of his desire to better improvise music on modular systems, and is the module he has often wished he had in his live performance cases. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is a pitch sequencer, a CV animator, an invisible pair of hands, and an LFO.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eRANDOM8 is designed to bring any sized eurorack system to life, to squeeze the most out of users other modules, and help people perform and jam music more easily. It can provide subtle yet essential per-step CV modulation to an entire system, allowing phrases to play for longer without the ear tiring of them. It can also be configured to provide up to 8 quantised pitch generators (or any combination of pitch and modulation at the same time) and so drive a bank of oscillators and provide the melodies for a whole system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe module provides 8 independent stepped (or smooth) random voltage generators packed into as compact size as possible. Feed the inputs triggers, and with every trigger, you get random voltages at the red output sockets on that channel and below it. Users can insert additional triggers into lower-down channels to break the normalisation and create groups of voltages. There is an output attenuator for each channel controlled with a trim pot. By pressing a button, channels will toggle between looping – it will repeat the last 1-32 steps indefinitely – and evolving, where voltages in memory change slowly over time. If users like what they hear they can press again, and now that phrase is locked, till they press again. This makes capturing voltage loops into a single action that can be performed in a split second. To return to full randomness, double tap the channel button.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAdditional features are contained in 8 menus which are all one layer deep. We have taken great care to keep it simple and consistent to understand and use despite having no screen. Hold a labeled button for 1 second, let go. Lights confirm you are in the menu that corresponds to that label. Now turn any of the 8 dials to edit that menu setting for any or all 8 channels at once. Only the controls you interact with will change. Push any button to immediately exit the menu and return to looping and evolving. Users can, for example, add slide per-channel to turn these stepped voltages into complex smooth LFO shapes. More details below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePresets can also be saved and recalled for quick access to different configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFirmware can be updated in seconds with a USB-C cable \u0026amp; computer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe believe that RANDOM8 has the power to inject fun and surprise into even a massive eurorack system. It can act like a ‘cheat code’ to perform live more easily, by keeping settings animated and ever-changing so you focus on other parts of your system. It can also fit into the smallest cases, too.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe idea for RANDOM8 was originally conceived when experimenting with native random and attenuator devices in VCV Rack. A software version of RANDOM8 will also be available as a \u003c\/span\u003e\u003cspan\u003efree\u003c\/span\u003e\u003cspan\u003e VCV Rack device at launch, for anyone to download and use as they see fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eFEATURE DETAILS\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e8 channels which produce random, looping, or \u003c\/span\u003e\u003cem\u003epartially\u003c\/em\u003e\u003cspan\u003e looping voltages that evolve over time. You tap the button to cycle between looping or slowly evolving, then double tap to return a channel to producing randomness.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003eA pitch quantizer can be enabled on each channel, turning any channel into a source of endless riffs. 16 scale options (including unquantised) are included, including an 1V stepped ‘Octaves’ scale, the output of which can be precision-added to 1V\/Oct sequences for pleasing ‘acidic’ octave jumps.\r\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eSlide lets a user smooth out the hard steps between voltages, allowing for the creation of acid lines (slide is post-scale quantisation), complex LFO shapes, and with low probability or infrequent triggers, lets slow evolving smooth voltages to be generated like an invisible hand turning the controls.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e8 different styles of random voltages are available at launch, selectable per channel. 5 different distributions of random voltages, one alternating ‘high-then-low’ voltage, two ‘wandering’ voltages (like invisible hands turning controls).\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_4_4 et_pb_column_5 et_pb_css_mix_blend_mode_passthrough et-last-child\"\u003e\n\u003cdiv class=\"et_pb_with_border et_pb_module et_pb_text et_pb_text_3 et_pb_text_align_right et_pb_bg_layout_light\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003ePer channel probability lets a user make it less likely that a channel will create a voltage on a step adding temporary randomness back in to locked loops, and making voltage changes less regular.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eInput divider means it takes from 1-8 input steps to create a new voltage at the output, allowing for voltage phrases where the same voltage is repeated multiple times, without requiring an external clock divider.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eOffset lets users raise up voltages to ‘clip’ them to the ceiling, useful for placing voltages in satisfying ranges, and controlling VCAs to add per-step volume variations to sonic elements such as drums and basslines, which may not have an accent input.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eUsers can easily reset individual channels or whole module with long presses. Hold a channel button for 5 seconds to reset to default settings. You can reset multiple channels at once, or all 8 channels by holding the top and bottom buttons.\u003c\/span\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLoop length can be varied from 1-32 steps per channel.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_row et_pb_row_4\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"et_pb_row et_pb_row_4\"\u003e\n\u003cdiv class=\"et_pb_with_border et_pb_module et_pb_text et_pb_text_4 et_pb_text_align_center et_pb_bg_layout_dark\"\u003e\n\u003cdiv class=\"et_pb_text_inner\"\u003e\n\u003ch1\u003eFEATURES\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e8 channels of random looping CV generation in 8HP.\u003c\/li\u003e\n\u003cli\u003eCycle between looping and evolving voltages with a single button press. Double click to return to random.\u003c\/li\u003e\n\u003cli\u003ePitch quantiser per channel with 16 options (1 unquantised, 14 scales, 1V octave scale).\u003c\/li\u003e\n\u003cli\u003eLooped phrases can have step length from 1-32\u003c\/li\u003e\n\u003cli\u003eCascading normalised triggers to create groups of voltages.\u003c\/li\u003e\n\u003cli\u003eInput trigger divider per channel, letting 1-8 triggers advance each step.\u003c\/li\u003e\n\u003cli\u003eSlide for creation of LFOs, slow evolving voltages and acid lines.\u003c\/li\u003e\n\u003cli\u003eOffset to raise voltage range and ‘clip’ voltages to the ceiling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_1_3 et_pb_column_7 et_pb_css_mix_blend_mode_passthrough\"\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e8 preset locations to save and recall entire module state.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSimple one-layer menu system designed by someone who dislikes menu systems.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDistinct and considered LED colours in menus aid with visualising settings.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eLong press buttons to reset channels or whole module conveniently.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePer channel probability to make voltage changes less frequent.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eSPECS\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOutput voltage 0-10V unipolar per channel.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCurrent draw: +12V: 60mA, -12: 12mA, 5v:0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 8HP\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDepth: 30mm (including power connector)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFun: Yes.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\r\n \u003c\/div\u003e\n\u003c\/div\u003e","brand":"BEFACO","offers":[{"title":"Default Title","offer_id":51570054889750,"sku":null,"price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1001\/4221\/9542\/files\/random8__28146.1778022407.1280.1280.jpg?v=1784250218"}],"url":"https:\/\/boutiquepedalnyc.us\/collections\/befaco.oembed?page=2","provider":"BPNYC","version":"1.0","type":"link"}